LANGLOIS Portable Solar Power Unit Type Restitution Network Instructions
- June 3, 2024
- LANGLOIS
Table of Contents
LANGLOIS Portable Solar Power Unit Type Restitution Network
The SOL-RES solar power plant includes
- a technical case.
- photovoltaic panels on tilting frames of approximately 200Wp each.
- the solar cable of 30 m to connect the panels to the case.
- portholes with 60W lamps to observe consumption.
- set of safety cords.
- power cord.
EDUCATIONAL OBJECTIVES
- Discover the different elements of a photovoltaic installation network restitution.
- Apprehend and understand the security elements present.
- Perform electrical measurements of the various quantities.
- Analyze & interpret the results.
- Study the performance and the effects related to the positioning of the panels
- Study the energy chain (production, use, resale, energy behavior).
- Wiring a photovoltaic installation with grid restitution.
STUDENT + TEACHER PEDAGOGICAL FILE
- This learning case allows the study of the return of photovoltaic energy on the national 230VAC 50Hz grid.
- You can choose between two types of operation: the total return of the energy produced or the return of the energy not consumed only.
- A silkscreen represents the different components.
- The components are to be connected with safety cables.
- This case must be connected to a 45Vmin photovoltaic voltage source.
- Input voltage between 45VDC and 150VDC.
Composition of the technical case
- Impact-resistant polypropylene case. It can be closed without unwiring the safety cords from the front panel. Lightweight and easily transportable using its handle.
- 2 photovoltaic connectors for connecting solar panels.
- 1 surge arrester.
- bipolar fuse holder with PV cartridge protecting the solar panel circuit and use.
- 1 disconnector to isolate the circuit of the solar panels from the technical case.
- 1 up 500W synchronizable on the network
- 1 On / Off switch for maintenance.
- 3 energy meters
- 1 disconnector to isolate the connection to the network.
- 1 voltage controller
- 1 bipolar 30mA differential circuit breaker
- 1 230VAC-500W 50Hz output on 4mm safety terminals
- 1 230VAC-500W 50Hz output on the electrical outlet
- Dimensions: 580 x 460 x 205mm
Supplied with an educational file including
- A theoretical reminder of the different types of cells and photovoltaic energy.
- The detailed wiring diagram of the solar power plant.
- Complete theoretical and practical work in student/teacher notebook form.
- Complete instructions for each component.
Documents / Resources
|
LANGLOIS Portable Solar Power Unit Type Restitution
Network
[pdf] Instructions
Portable Solar Power Unit Type Restitution Network, Portable Solar Power Unit,
Solar Power Unit, Power Unit
---|---
References
Read User Manual Online (PDF format)
Loading......