Honeywell HTF440 Series DreamWeaver Sleep Fan Owner’s Manual
- June 13, 2024
- Honeywell
Table of Contents
Honeywell HTF440 Series DreamWeaver Sleep Fan Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS FAN
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
-
Use this fan only as described in this manual. Other use not recommended as it may cause fire, electric shock, or injury to persons.
-
This product is intended for household use ONLY and not for commercial, industrial or outdoor use.
-
To protect against electric shock, DO NOT place fan in window, DO NOT immerse unit, plug, or cord in water, and DO NOT spray unit with liquids.
-
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature. -
Close supervision is necessary when any appliance is used by or near children.
-
Turn the fan OFF and unplug the fan from the outlet when not in use, when moving the fan from one location to another, and before cleaning.
-
To disconnect the fan, first turn the unit OFF, grip the plug and pull it from the wall outlet. NEVER pull the plug by the cord.
-
DO NOT operate the fan in the presence of explosive and/or flammable fumes.
-
DO NOT place the fan or any parts near an open flame, cooking, or other heating appliance.
-
DO NOT use any product with a damaged cord or plug, any product that malfunctions, or any product that has been dropped or damaged in any manner (see warranty).
-
Avoid contact with moving fan parts.
-
The use of attachments not recommended by the manufacturer may be hazardous.
-
Place the fan on a dry, level surface.
-
DO NOT hang or mount fan on a wall or ceiling.
-
DO NOT operate if the fan housing is damaged.
-
A loose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.
-
DO NOT run fan cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar coverings. DO NOT route cord under furniture or appliances. Arrange cord away from traffic areas and where it will not be a tripping hazard.
-
Do not use an extension cord or power strip with this fan.
WARNING: To reduce the risk of fire or electric shock, DO NOT use this fan with any solid-state speed control device, other than the one supplied.
FUSED SAFETY PLUG – FOR US MODELS ONLY
This fan features a fused safety plug which is designed to cut off electric current to the fan if an electrical fault occurs. Please see below for more information on how to properly use your fan and replace the safety plug fuse, if needed.
USER SERVICING INSTRUCTIONS
-
If your fan loses power and you suspect that the fuse on your fan has blown, grasp plug and remove from the receptacle or other outlet device. DO NOT unplug by pulling on cord.
-
Slide fuse cover, located on the top of the plug, towards the prongs of the plug. (Fig. 1)
-
Carefully remove the blown fuse and snap a new fuse into place. To reduce the risk of fire, replace fuse only with 2.5 Amp, 125 volt fuse. Fully close the fuse door by sliding back into place. (Fig. 2) Discard the blown fuse. The plug should now be ready for normal use.
-
To reduce the risk of fire, DO NOT replace attached plug. Discard product if the attached plug is damaged.
-
If you need further information on how or when to replace the fuse in the safety plug, please contact Kaz Consumer Relations Department by visiting our website at www.HoneywellPluggedIn.com/fans or calling 1-800-477-0457
INTRODUCTION
Helping to create your optimal sleep environment year-round
The Dream Weaver™ Sleep Fan empowers you to design a relaxing, comfortable
sleep environment to help promote a more restorative night’s sleep. Quick tap
controls make it easy to change the powerful fan speed settings even in the
dark. Enjoy the pink noise sound blocking benefits year-round with or without
a cooling airflow!
HTF400/440 SERIES OPERATION
ON/OFF and SPEED CONTROL
This fan features Quick Tap controls that turn the fan on and cycle through
the 3 powerful speed settings.
A light tap in the center of the control panel, located on the top surface
will turn the power on at the lowest speed setting. (Fig 3)
Continue to tap the control panel to increase the speed setting; low, medium,
high and off. (Fig 4)
Air Shutter – Airflow that you control for year-round use.
The Science of Pink Noise – Pink Noise is a mix of high and low
frequencies that sounds more balanced and natural than “white noise.” The fan
generates a soothing tone that remains constant even when you close the air
shutter.
ON/OFF
To enjoy the powerful airflow, keep the air shutter open. (Fig 5) When
cooling is not needed the air shutter can be closed all while maintaining the
soothing Pink Noise Sound. (Fig 6)
Note: When the Air Shutter is closed there will be a minimal amount of air that escapes through the top grille of the fan.
OSCILLATION
To activate the Oscillation feature, press the Oscillation button ( )
once.
Press the Oscillation button again to turn the Oscillation feature off.
(Fig 7)
PIVOTING BASE
Direct airflow where you need it, apply light pressure to the top of the unit
towards the front edge to pivot the unit down. (Fig 8)
To direct the airflow up, apply light pressure to the top of the unit towards
the back edge pivoting the unit up. (Fig 9)
AUTO-OFF TIMER OPTION
Choose from 1, 2, 4, or 8 hour settings by performing the following
function:
- 1 hour: Press the Timer button ( ) once.
- 2 hours: Press the Timer button ( ) twice.
- 4 hours: Press the Timer button ( ) a third time.
- 8 hours: Press the Timer button ( ) a fourth time.
Press the Timer button a fifth time to turn the Timer feature off. (Fig
10 )
USB CHARGING PORT (your fan must be plugged in to provide power to the USB port) Charge your electronic device while you sleep. Using your own charging cord, simply plug it into the USB outlet located in the base of the fan, and attach to your device to start charging. This outlet is rated 5V 2A.
LIGHT DIMMING FEATURE
Choose from 4 settings for your control panel lighting preference:
- Press the Light button ( ) once for 65% brightness
- Press the Light button ( ) twice for 35% brightness
- Press the Light button ( ) a third time for no light
- Press the Light button ( ) a fourth time for 100% brightness. (Fig 11)
HTF440 ONLY REMOTE-CONTROL OPERATION
To activate the battery in the remote, please remove the plastic pull tab.
ON/OFF AND SPEED CONTROL
Press the Fan button ( ) once to turn the fan on.
Continue to press the ( ) to adjust the speed setting, low, medium, high and
off.
OSCILLATION
To activate the oscillation feature, press the Oscillation button (
) once.
Press the Oscillation button ( ) again to turn the Oscillation feature
off.
LIGHT DIMMING FEATURE
Choose from 4 settings for your control panel lighting preference:
- Press the Light button ( ) once for 65% brightness
- Press the Light button ( ) twice for 35% brightness
- Press the Light button ( ) a third time for no light
- Press the Light button ( ) a fourth time for 100% brightness. (Fig 12)
USER SERVICING INSTRUCTIONS
CLEANING AND STORAGE
- Ensure the fan is turned off and unplugged.
- Use only a soft cloth to gently wipe the outer surfaces of the fan clean.
- DO NOT immerse the fan in water and NEVER allow water to drip into the motor housing.
- DO NOT use gasoline, paint thinner, or other chemicals to clean the fan.
- Store your fan in the original box or cover the fan to protect it from dust and debris. Store the fan in a cool, dry place.
- DO NOT wrap the power cord around the base of the fan. This could result in damage to the power cord.
CUSTOMER SERVICE
Questions or comments
Call us toll-free at:
1-800-477-0457
E-mail: consumerrelations@kaz.com
Or visit our website at:
www.HoneywellPluggedIn.com/fans
Please be sure to specify the model number.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE YOUR WARRANTY. DO NOT RETURN TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE FAN OR PERSONAL INJURY.
In the USA:
THIS DEVICE (HTF400/440 SERIES ONLY) COMPLIES WITH PART 15 OF THE FCC RULES.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Please note that changes or modifications of this product not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
In Canada:
This device complies with Industry Canada license – exempt RSS-210
Operation is subject to the following 2 conditions:
- This device may not cause interference, and
- This device must accept intererference, including intereference that may cause undesired operation of the device
YEAR LIMITED WARRANTY
You should first read all instructions before attempting to use this product.
A. This 1 year limited warranty applies to repair or replacement of product found to be defective in material or workmanship. Thiswarranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage. Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty. KAZ USA, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE. ANY IMPLIED WARRANTY OF MERCHANT ABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights which vary from jurisdiction to jurisdiction. This warranty applies only to the original purchaser of this product from the original date of purchase.
B. At its option, Kaz will repair or replace this product if it is found to be defective in material or workmanship. Defective product should be returned to the place of purchase in accordance with store policy. Thereafter, while within the warranty period defective product may be returned to Kaz.
C. This warranty does not cover damage resulting from any unauthorized attempts to repair or from any use not in accordance with the instruction manual.
Questions or comments
Call us toll-free at :
1-800-477-0457 or
E-mail: consumerrelations@kaz.com
Or visit our website at:
www.HoneywellPluggedin.com/fans
Please be sure to specify a model number.
Please go to
www.HoneywellPluggedIn.com/register
and register your product under the Customer Care Center and receive product
information updates and new promotional offers.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE YOUR WARRANTY. DO NOT RETURN THE PRODUCT TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE PRODUCT OR PERSONAL INJURY.
Honeywell is a trademark of Honeywell International Inc., used under license by Helen of Troy Limited. Honeywell International Inc. makes no representation or warranties with respect to this product. DreamWeaver™ is a trademark owned by Helen of Troy Limited.
For Responsible recycling, please visit:
www.RecycleNation.com
© 2018 All rights reserved. Kaz USA, Inc., a Helen of Troy Company 400 Donald Lynch Blvd., Suite 300 Marlborough, MA 01752
