tp-link Archer TX20U Plus Wireless USB Adapter Installation Guide

June 5, 2024
tp-link

**tp-link Archer TX20U Plus Wireless USB Adapter Installation Guide

**

Safety Information

  • Keep the device away from water, fire, humidity or hot environments.
  • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
  • Do not use the device where wireless devices are not allowed.
  • This product can be powered only by computers that comply with Power Source Class 2 ( PS2) or Limited Power Source(LPS) of IEC 62368-1.

Power Source(LPS) of IEC 62368-1.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Connect to a Computer

**Option 1: Directly

**

**Option 2: Via the USB Extension Cable (if provided)

**

Install Driver

  • Go to My Computer or This PC.
  • Double click the TP-Link disk then run SetupInstall.exe to install driver.
    Setup Install

Note:
If you cannot find the setup program, please download the driver at:
www.tpink.com/support

Join a Wireless Network

  • Click the network icon on the taskbar.
  • Select your Wi-Fi network, click Connect and enter the password when prompted.

Troubleshooting

If you have problems during the installation, please refer to the following online FAQs.

Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/EU and (EU)2015/863.

The original EU Declaration of Conformity may be found at
https://www.tp-link.com/en/support/ce/.

Support

For technical support, the user guide and other information, please visit https://www.tp-link.com/support, or simply scan the
QR code.
QR code

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals