JVC Soft Wireless Earbud with Stayfit Tips, Remote and Mic-Complete Features/Instruction Guide

JVC Soft Wireless Earbud with Stayfit Tips, Remote and Mic

Specifications

• BRAND : JVC
• EAR PLACEMENT : In Ear
• COLOR : Black
• CONNECTIVITY TECHNOLOGY : Bluetooth
• MODEL NAME : HAA8T
• BLUETOOTH : 5.0
• BATTERY LIFE : 15 hours
• WATERPROOF RATING: IPX4
• PLAYBACK: 1 hour
• PRODUCT DIMENSIONS: 7.28 x 1.69 x 2.87 inches
• ITEM WEIGHT: 4.2 ounces
• BATTERIES: 1 Lithium-Ion battery

Introduction

True wireless earphones in a variety of colors with a touch sensor, Bluetooth 5.0, Class 1. Battery life with the bundled charging case is 15 hours (6H+9H). Fast 15-minute charging allows for an hour of playback. 10mm neodymium magnet driver for high-quality bass sound. Take use of the advantages and conveniences of digital personal assistants. loudness control via remote operation. Water splashing from any angle is not a problem thanks to the IPX4 rating. When you take the earphones out of the charging case, they turn on and connect to your device on their own.

HOW TO SETUP

• Reposition the earbuds inside the case after picking up both of them and removing the adhesive. Pick them up once more to turn them on.
• Search for JVC HA-A17T on the device, then press to connect. Once linked, earbuds turn themselves on when removed from the case.

HOW TO TURN UP THE VOLUME

Press the R earphone button twice fast to increase the volume. Press the L earphone button twice fast to reduce the volume.

HOW DO YOU ANSWER A CALL

I take the call. When you get a call, immediately press the button once. Calling the call off During the call, swiftly press the button once. ignoring a call When an incoming call comes in, hold the button down continuously for approximately a second or so until you hear a beep. When you hear the beep, let go of your finger.

HOW TO USE

You can press and hold the central control button for 7 seconds while the headphones are off. The LED lights will alternately flash red and blue. Then you may use your phone to look for Bluetooth devices. You may pair and connect with the phone, and it will show you the model number.

HOW TO SKIP SONGS

The music will be skipped with two taps. The music will start over at the beginning with a triple tap.

HOW TO RESET

• To switch off the power, press the button on both earbuds.
• For around 20 seconds, press and hold the L earphone’s button.
• For around 20 seconds, press and hold the R earphone’s button.
• Put the charging case with the two earphones inside, then remove them.

Frequently Asked Questions

• How can I make my wireless earphones louder?
  Use a small toothbrush or a cotton swab that is only slightly damp to gently brush the mesh of wireless earbuds until all debris is removed. If the buds have silicon tips, take them off and immerse them in soapy water for three to five minutes.

• What’s up with my low volume?
  Select Sound Quality & Effects under Advanced Sound Settings under Sounds & Vibration in Settings. Select “Normal” for the Equalizer. Select Media Volume Limiter under Settings > Sounds & Vibration > Volume. Set the Custom Volume limit slider to its highest setting if it is on.

• Where can I find louder earbuds?
  Android: Activate Settings > Sound > Volume. For ringtone, notification, touch feedback, and media, there are four sound sliders. By turning on the switch Volume Keys for Media, you can additionally configure the volume keys to increase the volume either across all apps or in specific media apps.

• Why won’t my JVC headphones pair with Bluetooth?
  Make sure the Bluetooth device is within one meter of the system when pairing. On the Bluetooth device, turn pairing on. Reset pairing by erasing the pairing data from the Bluetooth device list. After turning the connected device’s Bluetooth feature off and back on, perform operations.

• How can I hook up my iPhone to my wireless JVC earbuds?
  Hold down the button for three seconds or until the red and blue flashes on the indicator alternate. Hold down the button for 7 seconds or until the red and blue flashes on the indicator alternate. 3 the Bluetooth device’s Bluetooth feature should be enabled. 4 Choose “JVC HA-EC20BT” from the available devices.

• Why won’t my iPhone recognize my JVC headphones?
  To calibrate the Bluetooth device, place it about a meter away from your headphones before turning it on. All that is needed to enable Bluetooth pairing is turning it on.

• How are JVC headphones configured?
  Press and hold the power button for three seconds until the red and blue flashes on the indicator alternate. Press and hold the button for 5 seconds or until the red and blue indicators alternately flash. 3 the Bluetooth device’s Bluetooth feature should be enabled. 4 Choose “JVC HA-S20BT” from the available devices.

• My JVC headphones won’t switch on—why?
  Attempt a hard reset: For around 10 seconds, press and hold the volume and power buttons (perhaps along with the other 2 as well), and then let go. When the Power button is hit, see if the earphones either turn on or indicate that they are charging while the cord is attached.

• Why does just one of my JVC earbuds work?
  Turn on the system after recharging it. Take both earphones out of the charging case, then put them back. A full insert into the charging case for the earphones is a must. To clean the earphones’ and charging case’s contacts of any debris, use a cotton swab.

• Why does one ear of my Bluetooth headphones only function?
  Depending on the audio settings on your headset, it might only play in one ear. So, make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>