QNIGLO Q-538 Wireless Intercom Doorbell User Guide

Q-538
Wireless Intercom Doorbell
DISCLAIMER AND OPERATION GUIDELINES

Disclaimer and Warning

Congratulations on purchasing your new QNIGLO product.
The information in the document affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use.
Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, and damage to your QNIGLO product. This document and all other collateral documents are subject to change at the sole discretion of UNIQLO.
By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using the product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all applicable laws, rules, and regulations, and all terms, precautions, practices, policies, and guidelines QNIGLO has made and may make available.
UNIQLO accepts no liabilities for damage, injury, or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in this document. UNIQLO is the trademark of Shenzhen Crony technology CO., LTD. Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies.
Amazon is the only authorized selling channel of QNIGLO products. Customers who buy QNIGLO products from all other channels(except Amazon) could not have a QNIGLO warranty policy and shall take their own responsibilities for all possible losses. UNIQLO does not have any responsibility to them.

Before You Begin
Check that you have all of the included parts. Read the entire user manual. Read the disclaimer and warning above to understand your legal rights and responsibilities. If you have any questions or problems during the installation, maintenance, or use of this product, please contact the QNIGLO service team: qniglo-serviceteam@outlook.com.

Warning

• Never disassemble or pierce the product in any way or the warranty will not cover the personal disassembled products.

Product Overview

The UNIQLO doorbell, equipped with a wireless intercom system, combined with the doorbell and intercom functions, realizes to talk with visitors without opening the door. Better protects the people in the house and more safety for people living alone.
About Q358 Doorbell

will ring (“ding-dong” or music) to remind visitors to come.
VOL| Volume| 3 levels of volume for choice. Factory default is the second level. Press once, and add to the biggest third volume. Press twice, it will turn to the first volume. (2.3.1.2…loop)
| Doorbell music| Press it to choose your favorite ringings.
| Channel| 3 channels for choice. A, B, C.
Please check and make sure that indoor and outdoor units’ channels are the same. Please check its corresponding frequencies and CDCS CODES in Table 2.
| Power| Turn on/off when pressing and holding for 3 seconds.
| TALK button| After receiving a voice from the indoor unit, press and hold the talk button to speak. (Speaking time, within the 60s)
| Led indicators| Blue light indicates pairing status, Red light indicates the power.
| Re-pairing key| Press and hold for 3 seconds, the machine enters into pairing mode.
INDOOR| Name| Function
---|---|---
| Bell| 1. Press the Bell button to cut the ringing.
2. Press the bell to call other intercom devices which are in the same frequency (checking corresponding frequencies and CDCS CODES in Table 2.)
VOL| Volume| 3 levels of volume for choice. Factory default is the second level. Press once, and add to the biggest third volume. Press twice, it will turn to the first volume. (2.3.1.2…loop)
| Doorbell music| Press it to choose your favorite ringings. There is 20 music for choice.
| Channel| 3 Channels for choice. A B, C.
Please check and make sure that indoor and outdoor units’ channels are the same. Please check its corresponding
frequencies and CDCS CODES in Table 2.
| Power| Turn on/off when pressing and holding for 3 seconds.
| TALK button| When received a ringing from the outdoor unit:
1. press once to cut the ringing
2. press and hold the button of the indoor unit to speak. (speaking time, within the 60s).
| Led indicators| Blue light indicates pairing status, Red light indicates the power.
| Re-pairing key| Press and hold for 3 seconds, the machine enters into pairing mode.

Installation

3.1. Included parts

1. Outdoor machine  1
2. Solar panel  1
3. Indoor machine  1
4. Charger dock  1| 5. Screws  6
6. Screwdriver  1
7. User manual  1
8. USB Cable  1
9. Battery  *2
---|---

3.2. Installation
3.2.1. Indoor Unit installation
Already assembled, ready for charging and using. Please put it in the charging dock for charging while not used to avoid missing visitors caused by out-of- power.

3.2.2. Outdoor Unit installation
A. Fix the solar stand with screws on the wall. (Picture 3)
B. Then fixed the outdoor unit on the panel with screws

Charge

4.1. Charging dock
Both indoor and outdoor units need to be charged before use.
Put them in the charging dock to charge them in turns. There is a charging indicator in the dock, a red light means charging, and a green light means fully charged. If the indicator light doesn’t turn on, please adjust the unit charging position.

4.2. USB Cable
Both units could be taken off the battery and charged the batteries alone by a USB cable.
Here are the steps:

1. Remove the screws of the front cap, then take off the cap. Pull off the bottom battery and then charge it via a USB cable. (as pictures)

*The outdoor unit has a solar panel for auxiliary charging, which can supply its daily standby power. In order to make sure its service power, please fully charge it before use.
Note:

1. Please always put the indoor unit in the charging dock to charge to avoid missing any visitors if out of power.
2. When the outdoor unit is under low battery status, there is a slow flash red light in its right-up corner, please charge it in time.
3. The charging time of both units is around 5 hours, Usually, the outdoor unit could work a year after being fully charged.
4. Due to the charging time needing hours, in order to avoid missing visitors, please exchange the indoor unit’s and outdoor units’ batteries.

Instruction

5.1. Doorbell Function
5.1.1.Power on/off
Indoor unit
Power on: Press and hold the power button for 3 seconds, there is a ‘beep~’ sound for power on the notification.
Power off: Press and hold the power button for 3 seconds, there is a ‘bi, bi’ sound for the power off notification.
Outdoor unit
Power on: Press and hold the power button for 3 seconds, there is a ‘beep~’ sound for power on the notification.
Power off: Press and hold the power button for 3 seconds, there is a ‘bi, bi’ sound for the power off notification.

5.1.2. Channel Pairing
There are 3 channels for choice. Make sure that both units are in the same channel so that the machines could work. The factory default setting is the same.
5.1.3. Doorbell
When both units are in the same channel, press the outdoor unit bell key , and the indoor unit will be ringing(‘ding dong’ or other music) to remind visitors. Kindly remind, that only the outdoor unit can start a ringing, the indoor unit doesn’t have this function.

5.2. Intercom Function
When people hear the indoor unit’s sounds (‘ding dong’ or music), they can press any button on the indoor unit to stop the ringing, And then press and hold the TALK button to speak, like “Hello! Who’s speaking?”, then release the button when finished speaking. (The outdoor unit is the same way for speaking) After receiving the reply from the outdoor unit, press and hold the TALK button to reply.

Note:

1. To save power, the outdoor machine will fall into sleeping mode if it does not detect operations within 25 seconds. Under sleeping mode, the indoor machine will be unable to talk with the outdoor machine. However, if anyone clicks the CALL button of the outdoor machine, it will be activated and the indoor machine can talk with it after receiving the ringing.
2. Under the sleeping mode of the outdoor unit, the indoor unit cannot talk with the outdoor unit. Only the outdoor machine is initiated by pressing its belly button, and the indoor machine can talk after receiving its ringing.
3. TOT transmission time limit: In order to effectively protect the circuit device and wireless frequency occupation, the transmission intercom could not exceed 60 seconds. When the talking time is over 60 seconds, the machines will have a long beeping sound, the sound will disappear after releasing the TALK key, and the message could not transfer to other machines. You need to operate it again within 60 seconds.
4. Short press buttons can call other radio intercom devices of the same frequency. Press the TALK button to talk. When setting the same frequency as other devices and the doorbell units, they could be connected and talk.
   Please check Table 2 for Channel and frequency comparison.

Frequency table(Table 2)

Status Indicator lights
There are 3 colors of the indicator lights, red, green, and blue.
Different colors and flashing mean different statuses.

Pairing

6.1. Re-pairing
If the machines are out of pairing, the bell functions will be not working. Please re-pair it as the following steps:

1. Make sure the channels of both units are the same, press the indoor pair button, and the pairing indicator blue light will be flashing, which means entering into pairing mode.
2. Then press the bell button of the outdoor unit, there is a “di” sound and the blue flashlight turns off, which means the pairing is completed.

6.2. Add Additional Units
6.2.1. Adding Extra Outdoor Units
If adding extra outdoor units to connect with present units, you need to repair them.
Here are the steps:

1. Make sure the channels of the extra units are the same as the existing units, press the extra outdoor unit’s pairing button, and the indicator blue light will be flashing, which means entering into pairing mode.
2. Then press the bell button of the original outdoor unit, there is a “di” sound and the blue flashlight turns off, which means the pairing is completed.

Pictures for your reference:

6.2.2. Adding Extra Indoor Units
If adding extra indoor units to connect with present units, you need to repair them.
Here are the steps.

1. Make sure the channels of the extra units are the same as the existing units, press the extra indoor unit’s pairing button, and the indicator blue light will be flashing, which means entering into pairing mode.
2. Then press the bell button of the original outdoor unit, there is a “di” sound and the blue flashlight turns off, which means the pairing is completed.

Troubleshooting

Most issues that arise can easily be resolved by changing the settings on your intercom doorbell.
Please read this user manual carefully before you use this machine. Use the table below to find your exact issue and possible solutions for it. If you need more help, you are welcome to contact us via our customer service email at Qniglo-serviceteam@outlook.com.

Connect with QNIGLO Intercom System

UNIQLO intercom doorbell can connect with the QNIGLO Intercom system. Please check Table2 for the corresponding channel&code for connection.
Note:

1. When you set the corresponding Channel&code, the doorbell can talk with our brand intercom.
2. Click the CALL button of the outdoor machine, the intercom will not ring even set the corresponding channel&code. However; Click the ON/OFF button for the indoor machines, and the intercom will ring. The outdoor machine can only talk with the intercom, but can not CALL and give a ring alert before talking. The indoor machine can communicate and make the intercom ring the bell as well.

Specifications

• Name: QNIGLO DOORBELL

• Model: Q358

• Dimensions: 5924123mm (Machines)
  …………………..10162mm (Solar panel)
  ……………………815636mm (Charger dock)

• Weight: 340G

• Consumption: 30mA (indoor unit)
  …………………….<100uA (outdoor unit)

• Frequency: 462/467MHz

• Power: 0.5W

• Charging Time: 5 hours

• Operating time: 2 days (indoor unit)
  ………………………6-12 months (outdoor unit)

FCC Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment should be installed and operated with a minimum distance of 0mm between the radiator and your body.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• This radio is designed for and classified as “General population/uncontrolled Use”

• DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits.
  A proper antenna is an antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio.

• DO NOT transmit for more than 50% of total radio use time, more than 50% of the time can cause RF exposure compliance requirements to be exceeded.

• This transmitter may operate with the antenna(s) documented in this filing in Push-to-Talk and body-worn configurations.

RF exposure compliance is limited to the specific belt-clip and accessory configurations as documented in this filing and the separation distance between the user and the device or its antenna shall be at least 2.5 cm.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>