HELVEX UDC-05 Deco Paper Holder Installation Guide

June 5, 2024
HELVEX

INSTALLATION GUIDE
Deco Accessories Line

Technical Support and Service
Original Spare Parts
Toll Free Refacciones Originates
(855) 267 249
contact@helvexusa.com


Thank you for choosing HELVEX products.
We are confident that the product reliably will exceed your highest expectations. This product’s functionality, aesthetics, durability, quality, and support will grant you full satisfaction for years, thus reflecting Helvex’s commitment to quality, innovation, and the environment.
**WARNING**
To reduce the risk of injury or property damage, please read all instructions before installing the product. Wear safety glasses. For any construction, installation, alteration, extension, or repair, comply with your local building codes. The product’s illustration may vary in appearance from the actual product as a result of the continuous improvement process it is subject to.
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

This Installation Guid
Applies to the Product in any Finishing.
Recommended Heights for Accessories Installation

MODEL DESCRIPTION HEIGHT (“)
UDC-04 Paper Holder
UDC-05 Towel Bar 47,2 / 120
UDC-06 Robe Hook 64,9 7165
UDC-09 Small Towel Bar 38,1 / 150

* Recommended installation he’s ht based on FFL Finished Floor Level

Recommended Tools and Materials

| flat-head screwdriver
---|---
| drill with Ø 1/4” concrete drill bit
| level
| pencil

Items Included in the Product

fixing kit for drywall and solid wall

General Installation

  1. Unscrew the set screw with the flat-head screwdriver (not included) and remove the wall bracket.

  2. Place the wall bracket over the wall, level and mark the holes.

  3. Drill with a Ø 1/4″ concrete drill bit.

  4. Insert the anchors (included) and fix the wall bracket screwing the lag screws (included).

    Note: The anchors must be inserted completely. Do not cut the anchors.

  5. Attach the accessory to the wall bracket and screw the set screw to fix it.

Towel Bar UDC-05

  1. Unscrew the set screws and remove the wall brackets from the two escutcheons. Place the wall bracket over the wall, level and mark the holes. Drill with a Ø 1/4″ concrete drill bit. Insert the anchors (included) and fix the wall brackets screwina the lag screws. Finally, attach the accessory to the wall brackets and tighten the set screws to fix it.

Toll free number
Contact us: (855) 267 2498
contact@helvexusa.com

Cleaning Recommendations

It is very important to follow the instructions below to preserve HELVEX products’ finishings shiny and in perfect conditions:

  1. Use only water and a clean cloth.
  2. Do not use fibers, powders, abrasives, or chemicals.
  3. Do not use sharp objects to clean the finishings.
  4. It is recommended to clean your device daily.
    Visit our website www.helvexusa.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals