HELVEX UPIA-106-PC Piazza Single Robe Hook in Polished Chrome Installation Guide
- June 4, 2024
- HELVEX
Table of Contents
HELVEX UPIA-106-PC Piazza Single Robe Hook in Polished Chrome
Thank you for choosing HELVEX products.
We are confident that the product reliably will exceed your highest
expectations. This product’s functionality, aesthetics, durability, quality
and support will grant you full satisfaction for years, thus reflecting
Helvex’s commitment to quality, innovation and the environment.
Warning To reduce the risk of injury or property damage, please read all
instructions before installing the product.
Wear safety glasses. For any construction, installation, alteration, extension
or repair, comply with your local building codes. The product’s illustration
may vary in appearance to the actual product as result of the continuous
improvement process it is subject to.
This product can expose you to chemicals including lead, which is known to the
State of California to cause cancer. For more information go to
www.P65Warnings.ca.gov.
This Installation Guide Applies to the Product in any Finishing.
Recommended Heights for Accessories Installation.
MODEL / MODELO| DESCRIPTION / DESCRIP CIÓ
N| HEIGHT (”) / ALTURA (cm)
---|---|---
UPIA-105| Towel Bar| 47,2 / 120
UPIA-106| Single Hook| 64,9 / 165
UPIA-109| Short Towel Bar| 47,2 / 120
UPIA-117| Paper Holder| 19,6 / 50
Recommended Tools and Materials
phillips screwdriver| drill with ؼ” concrete drill bit | level| pencil
General Installation
-
Unscrew the set screw and remove the wall bracket.
-
Place the wall bracket over the wall, level and mark the holes.
-
Drill with a Ø1/4″ concrete drill bit.
-
Insert the anchors (included) and fix the wall bracket screwing the lag screws (included).
-
Attach the accessory on the wall bracket and screw the set screw to fix
Towel Bar PIA-105
Unscrew the set screws and remove the two wall brackets from the two
escutcheons. Place the wall bracket over the wall, level and mark the holes.
Drill with a Ø 1/4″
concrete drill bit. Insert the anchors (included) and fix the wall brackets
screwing the lag screws. Finally attach the accsesory on wall brackets and
screw the set screws
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>