ZonnSmart HL60 Smart Heating and Sleep Monitoring Pillow User Guide
- June 5, 2024
- ZonnSmart
Table of Contents
**ZonnSmart**
HL60 Smart Heating and Sleep Monitoring Pillow
User Guide
Operating Instructions
1.1 Turn on and Turn off
Turn on： Connect the device to the power to turn it on.
Turn off: Click the button circularly until the LED light goes out to turn
off(Mainly used to turn off the heating function ).
1.2 Temperature Control
This product is designed with four gears, which are displayed below:
1st gear-green light(37~41℃);
2nd gear- orange light(42℃~46℃);
3rd gear-purple light(47℃~51℃);
4th gear-red light(52℃~57℃);
1.2.1 Shift by Button
Users can directly switch gears by the button, and set the corresponding
target temperature cycle control in the order of” starting->green 37℃ ->orange
42℃ ->purple47℃->red 52℃->shutdown “ The specific operation flow is shown in
the following figure:
Every time the gear is adjusted, the device will be heated at full power. When
the target temperature is reached, the breathing light will be turned on and
kept at a constant temperature.
Note : It can be turned on by plugging into the power supply. By default,
it will be heated at the 1st gear. When the temperature reaches 37℃, the green
breathing light will be turned on.
1.3 Lighting Control
1.3.1 Night Mode
This device has a night mode, and if there is no operation within 30 seconds
from 17:00 on the same day to 08:00 on the next day, the lights will be
automatically turned off in order to reduce the impact on the user’s sleep.
After entering the night mode, any key operation or APP operation will cause
the machine to exit the night mode immediately.
1.4 Bluetooth Music Playing
See 1.6.6 Bluetooth music playing for more details.
1.5 Sleep Monitoring
Sleep monitoring is conducted from 18:00 on the same day to 12:00 on the next
day. During this period, sleep data ( Mainly related parameters of shallow
sleep, deep sleep, and rapid eye rotation) are recorded every half hour.
In order to ensure the accuracy of sleep monitoring data, please try to :
- Connect the Tuya Smart App with the device before going to sleep at night and enter the “sleep” page；
- After getting up the next day, please connect to the APP again and enter the “Sleep” page to synchronize the sleep data；
Note: Sleep data can only be kept on the device side for 3 days, so if the device is not used to connect to the APP for 3 consecutive days, the data of the earliest day may become inaccurate or lost. The acquired sleep data will be displayed on the “Sleeping” page of the APP.
1.6 APP operation
Please search for “Tuya Smart App” in the Android application market(If it is
an Apple phone, please go to Apple Store), download it, and then install it.
1.6.1 Arrangements
- Log in to the Tuya Smart APP.
- Press and hold the device for 2s, wait for the blue light to flash, and then enter Bluetooth pairing mode.
1.6.2 Search and Connection
Manual adding method: click”+” in the upper right corner –select” add manually
“–find the device to be added (the device name is “Smart Sleep-assistance
Pillow” ),” add it” – -Click “+” –wait for connection — after completion, the
system will automatically enter the device page.
Automatic adding method: click “+ “ in the upper right corner — select “
automatic adding” — search for the device ( the device name is “ Smart Sleep-
assistance Pillow”）“Next” –wait for connection — the system will automatically
enter the device page after completion.
1.6.3 Temperature Adjustment
Temperature adjustment: The annular area is the temperature adjustment
operation area, and the user needs to slide the pointer to adjust the
temperature. Turn off heating when the pointer slides off.
Stall: Different temperatures correspond to different gears and colors:
green light(37℃~41℃)， orange light(42℃~46℃)， purple light (47℃~51℃), and
red(≥52℃).
1.6.4 Timing Heating
Click the “ timed heating” button, select the time in the pop-up window, and
then click “OK “ to start automatic heating. At the same time, display the
countdown in the middle of the temperature control interface on this page .
After the countdown, the machine automatically stops heating. Click the “
close timing” button to close the countdown and keep the device at the current
temperature.
1.6.5 Sleep Monitoring
Data viewing: On the “ Sleep “ page, users can view the total sleep
duration, sleep duration and proportion in each stage, sleep quality, and
other information.
Data update: The local data will be automatically synchronized when
entering the device page or the data can be manually switched for
synchronization. Local data can be kept for up to 3days, and data can be kept
for up to 7 days after being uploaded to the cloud.
1.6.6 Bluetooth Music Playing
In “Setting –Bluetooth” of the mobile phone, turn on the Bluetooth function,
search and pair the device named “Smart Music Pillow BLE”.
Sleep Music on Demand
On the “Music “ page of the Tuya smart APP, users can order various sleeping
music according to their personal hobbies.
Click the drop-down button, and the user can perform the timed operation and
start the countdown. When the time is set to “∞”, it can be closed at a fixed
time.
Click “More” to go to the third-party music APP, which currently only supports
Netease cloud music and QQ music.
1.6.7 Device Information
Device information: Click in the upper right corner to enter the device
information interface, where you can view the device status and more setting
options.
Firmware update: Click “Check Firmware Upgrade”, and the users can view
the device version information. If there is a new version, the users will be
prompted to upgrade.
1.6.8 Disconnect the smart pillow
Disconnect the smartphone app with the smart pillow by long pressing the
button for 10 seconds, so other people can connect the smart pillow again.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.