SP107E Bluetooth LED Music Controller Operating Instructions Manual
- June 5, 2024
- RGBZONE
Table of Contents
1. Features:
1. Long distance APP remote control via Blutooth;
2. Support almost every kind of one-wire or two-wires LED driver IC ;
3. Support setting pixel number and segment number, support up to 960 pixels;
4. With 18 kinds of LED strip music effects, 30 kinds of LED matrix music
effects
and 180 kinds of non-music effects;
5. DC5V~24V wide range working voltage, reverse power supply input
protection;
6. User setting saving;
2. Download and install the APP:
Both IOS version and Android OS version are available. (hardware should support Bluetooth)
- Requires IOS version 10.0 or later;
- Requires Android OS version 4.4 or later;
- Search “LED Chord” in App Store or Google Play or scan this QR code to download and install the APP:
3. Instructions:
-
APP Operatings :
1.Make sure you have turn on Bluetooth on your phone;
2.Open the APP, drag to refresh the device list, select device name “SP107E” to connect the controller, once connected you will able to rename your
controller;
3.Select RGB order and IC type;
4.Adjust pixel number;
5.Press ENTER.
Audio Input :
There are two ways to input the audio signal on SP107E, AUX IN and Build-IN microphone ; -
AUX IN: Plug the supplied audio split cable into the “ AUX IN ” jack, connect the audio output source(MP3,Phone or tablet…)and the speaker(or
headset), controller will automatically switch into AUX input mode; -
MIC: Disconnect the audio cable, controller will automatically switch into microphone input mode.
4. Specifications:
Working temperature : -20°C~60°C;
Working Voltage : DC5V~24V;
Working Current : 18mA~45mA;
Remote distance : 20 Meters;
Product size : 85mm45mm22mm;
Product weight : 40g ;
Certificates : CE, RoHS;