iLive Truly Wire-Free Earbuds, Sweatproof, Includes 3 Set of Ear Tips-Complete Features/Instruction Guide

iLive Truly Wire-Free Earbuds, Sweatproof, Includes 3 Set of Ear Tips

Specifications

• BRAND: ILive
• EAR PLACEMENT: In Ear
• COLOR: Black
• CONNECTIVITY TECHNOLOGY: Wireless
• MODEL NAME: Wire-Free Earbuds
• RANGE: 49 feet
• BATTERY LIFE: ~2.5 hours
• ear tips: 1 small, 1 medium, 1 large, and USB-C cable
• WIRELESS COMMUNICATION TECHNOLOGY: Bluetooth
• CONNECTOR TYPE: 2.5mm Jack
• PRODUCT DIMENSIONS: 2.36 x 1.54 x 1.14 inches
• ITEM WEIGHT: 1.76 ounces
• BATTERIES: 3 Lithium-Ion batteries

Introduction

With these sweatproof, truly wireless earbuds, you can accomplish more at work, while practicing yoga, jogging, or working out at the gym because there are no unsightly cords to obstruct your mobility. With the provided ear tips (small, medium, and large), you may adjust the fit to your preferences. Voice prompts make it simple to switch to the next song or link with a new device. The “buds” are already matched with each other when you open the package, making it easy for you to set up and start dancing. Three sets of ear tips are provided: a small, medium, and large pair, as well as a USB-C cord.

WHAT’S IN THE BOX

• Cable
• Wireless Charging Case

CHARGING THE EARBUDS

1. Open the cover and place the earbuds on the charging contacts. Be sure to match the left and right earbuds with the correct docking station in the case.
2. When charging, the first and fourth Power & Battery Indicator LEDs on the case will flash blue. When charging is complete, the indicator LEDs will turn off.
3. Earbud Indicator LEDs will turn red when charging. When fully charged, the LEDs will turn off.

CHARGING THE CASE

Using a USB-C to USB cable (included), connect to the USB port of a powered-on computer or USB power adaptor (not included) to charge the case. When the case is charging the Power & Battery Indicator LEDs will flash blue. When fully charged all LEDs will turn solid blue.

PAIRING BLUETOOTH

Note
When earbuds are powered on, they automatically link and enter into pairing mode. You can power on a single earbud to use as a single unit if you wish.

1. With the earbuds linked, you can now connect to your Bluetooth device. The LED indicator on the right earbud will continue flashing blue and red, indicating it is ready to pair to a Bluetooth device.
2. On your Bluetooth device, access Bluetooth Settings and search for nearby devices. Select IAEBT40 when it is discovered. When successfully connected to your Bluetooth device, the LED indicator on both of the earbuds will flash blue, slowly and a voice prompt will announce the Bluetooth connection.
3. Audio played through the connected Bluetooth device will now be heard through both earbuds. Use the controls on the connected device to play audio and adjust volume.

PLEASE NOTE
 Due to the nature of truly wireless earbuds, you may experience slight interruptions with your audio in areas with multiple 2.4Ghz bands or in high wireless traffic areas.

SPEAKERPHONE

• To accept or end a phone call, press the Function button.
• You can also use the controls on the connected phone to handle phone functions.

CHARGING CASE & AUTO-ON FEATURE

WHILE THE CASE POWER IS ON

• Placing the earbuds in the charging case will automatically power them off and begin charging.
• Removing the earbuds from the case will automatically power them on, link them, and connect to the last used Bluetooth device (earbuds must have been linked and connected to a Bluetooth device already).

CUSTOMER SUPPORT

• Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
• For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
• To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com
• Copyright © 2021 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.

FCC WARNINGS

WARNING
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ADDITIONAL WARNINGS

• WARNING
  To prevent fire or shock hazards, do not expose this unit to rain or moisture.

WARNING
Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.

• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
• This product meets and complies with all Federal regulations.
• To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.

Frequently Asked Questions

• iLive really wire-free earbuds pairing?
  When connecting earbuds: To turn on both earphones, hold down the Function button for a few seconds. Red and blue LEDs on each earbuds will rapidly flash. To pair the earphones, quickly click the Function button on the right one.

• How do the volume controls on my ILive earbuds work?
  To turn on, hold down the button. Press quickly twice to raise the volume (RIGHT). Press quickly twice to reduce loudness (LEFT). Press three times quickly to advance (RIGHT).

• How do you tell when the battery in your true wireless earbuds is full?
  The charging case’s front has an LED indicator that flashes red during charging and stays red when fully charged. NOTE: In order to prevent the problem of losing the earbuds’ “auto power on and off” features, it is crucial to keep the case charged at all times.

• How long does it take to charge an ILive wireless earbud?
  To charge, connect the provided USB cable to a USB port on a working computer. Before using, thoroughly recharge. When charging, the indicator will flash red; when fully charged, it will turn blue. The first charging takes about two hours.

• Why does one of my Bluetooth earbuds only function?
  Depending on the audio settings on your headset, it might only play in one ear. So, make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.

• What does the blue light on earphones imply when they are charging?
  The battery is charged if the exterior blue light is on. It can charge your headphones up to 10 times, according to the user instructions.

• Should I always have earbuds on hand?
  When not in use, the case will charge both earbuds and keep them together. The majority of cases have a lithium-ion battery that keeps the earphones charging until they are fully charged. The earbuds should always be kept on hand just in case.

• Without a case, how do I charge my earbuds?
  You must connect a Micro USB cable to your device and either a computer or a USB adapter in order to charge earbuds with a micro-USB. After that, you must wait while your earbuds fully charge.

• How are earphones recharged while in a case?
  Close the charging case’s cover after putting the earbuds inside. The battery LED within the charging case is red, yellow, or green when the lid is open to show the earbuds’ current battery state. The earphones need about two hours to fully recharge.

• Why do neither of my earbuds allow me to hear?
  There may be a variety of causes for a pair of headphones to only output audio to one ear. The wires around the audio jack have most frequently been bent back and forth so many times that they have created a short in the wiring, which is the most typical cause of sound coming out of only one side.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>