panlux H-138/M Wireless French Plug In Doorbell Instructions
- June 5, 2024
- panlux
Table of Contents
panlux H-138/M Wireless French Plug In Doorbell
INSTRUCTIONS
BEFORE USING OR INSTALLING THE DOORBELL, KINDLY READ THE INSTRUCTIONS AND
FOLLOW SAFETY RULES.
Thank you for choosing the item of company PANLUX s.r.o.
INSTALLATION
Mount the transmitter:
Choose place for transmitter. It should be mounted on visible place, which is
protected against rain and extreme heat. It is possible to fix the transmitter
by screw or self-adhesive sellotape.
Place the receiver:
Choose suitable wall plug for receiver. Every barrier between transmitter and
receiver can reduce operating range of doorbell.
Notice
Before using, check the product and make sure there is no damage, otherwise do
not use it. Before any manipulation assure that mains electrical supply is
disconnected. In case of damage do not repair or disassemble the product.
Infringement of any instruction mentioned in instruction manual can cause harm
to health or property.
If the product is mechanically damaged or connected unprofessionally,
guarantee cannot be allowed.
Installation
TRANSMITTER (IP44)
- Push button
- Use flat screwdriver to remove transmitter cover
- To fix the base plate use two screws or self-adhesive sellotape
- Sound selection button (32 melodies)
- Put battery 12V/23A in correct polarity (battery included)
- Put transmitter cover on
**RECEIVER 230V~50Hz
**
- Volume setting
- Speaker
- LED indicator – it shines if receiver works
IF THE PRODUCT IS MECHANICALLY DAMAGED OR CONNECTED UNPROFESSIONALLY, GUARANTEE CANNOT BE ALLOWED.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>