panlux PN32300029 Rotatable LED Spotlight VANA MOTION Instructions

VANA MOTION
MODEL: PN32300029

PN32300029 Rotatable LED Spotlight VANA MOTION

INSTRUCTIONS

Thank you for choosing this product from PANLUX s.r.o.
Before using or installing the product, please read the instructions and follow the safety rules. Installation should be carried out by a qualified professional or company.

Technical data
material: plastic, aluminium
Notes
Before using, check the product and ensure that it is not damaged in any way; if it is, do not use it. Before any installation ensure that the main electrical supply is disconnected. If the product is damaged, do not attempt to repair or disassemble it. For the best results, the area of movement should be directly in front of the sensor. Product malfunction can be caused by an interruption of the electromagnetic field, a small temperature difference between a moving object and the surroundings, and reflection (e.g. a strong light source).The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Failure to follow these instructions can cause damage to health and property.
The warranty is void if the product is damaged or installed incorrectly.

 SENSOR SETUP

Principle of PIR sensor
The PIR sensor receives infra-red waves emitted by objects within the reach radius. When movement occurs within the detection area, the sensor notices the change and initiates the trigger order “light on” for the selected time.

**Time setting (switch-off delay) — TIME 3min (±10s)***
The countdown of the selected time begins after the last detected movement.

**Light sensitivity setting — LUX (0-20001x)***

**Reach setting (sensitivity) — max. 8m**
Reach is the area traced out by the angle of detection and the minimum to maximum possible distance from the sensor. Reach can be changed by rotating the head of the sensor.
preset sensor values – cannot be changed
) These figures are approximate, and may vary depending on position and mounting height

Automatic rotation to a moving person (mode 1 and 2) – only horizontal movement

For modes 3 and 4 – manual adjustment of the position of the reflector – the electric motor can offer a slight resistance

The light has 4 mode, and it changes by press the button once

1. The indicate LED flash 1 time, the light can only be turn on at night by PIR sensor, and the light head will turn to the movement person.
2. The indicate LED flash 2 times, the light can be turn on at day and night by PIR sensor, and the light head will turn to the movement person.
3. The indicate LED flash 3 times, the light can only be turn on at night by PIR sensor, and the light head will not turn to the movement person.
4. The indicate LED flash 4 times, the light can be turn on at day and night by PIR sensor, and the light head will not turn to the movement person.

All right reserved.
Technical data can be changed without previous notice.
shop.panlux.cz
Please, download the latest updated version of the manual.
UM_VANA_MOTION_221109

Documents / Resources

| panlux PN32300029 Rotatable LED Spotlight VANA MOTION [pdf] Instructions
PN32300029 Rotatable LED Spotlight VANA MOTION, PN32300029, Rotatable LED Spotlight VANA MOTION, LED Spotlight VANA MOTION, Spotlight VANA MOTION, VANA MOTION
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>