BODY CRAFT F730 Oly Plate Holder Option Owner’s Manual
- June 5, 2024
- BODY CRAFT
Table of Contents
CRAFT F730 Oly Plate Holder Option
Owner’s Manual
for the BodyCraft F730 / F430 (Power Rack) or F738 (RFT)
http://www.bodycraft.com/F735-qr.html
BODYCRAFT
Lot Code: F735 – YYMMDD
https://www.bodycraft.com/product-registration/
Assembled Parts List
| Part # | Assembly Parts List | QTY |
|---|---|---|
| F735-501-ASM | Frame, Top, Rt & Lt – Assembly | 2 |
| F735-502 | Frame, Upright, for Oly Plate Storage | 2 |
| F735-503-ASM | Frame, Bottom, Rt & Lt – Assembly | 2 |
| F735-504-ASM | Oly Plate Horn – Assembly | 8 |
| F735-514-ASM | Adjustable Foot, for Lower Base Frame – Assembly | 2 |
| Part # | Assembly Hardware | QTY |
| --- | --- | --- |
| F735-505 | Nut, Nylon Lock 1/2″ – BLACK | 8 |
| F735-506 | Washer, Spring 3/8″ – BLACK | 8 |
| F735-507 | Bolt, Hex Head 1/2″ x 4-1/2″ – BLACK | 4 |
| F735-508 | Bolt, Hex Head 1/2″ x 3-1/4″ – BLACK | 4 |
| F735-509 | Bolt, Hex Head 1/2″ x 2-1/2″ – BLACK | 8 |
| F735-510 | Bolt, Hex Head 3/8″ x 1-1/4″ – BLACK | 8 |
| F735-511 | Washer, Flat 1/2″ – BLACK | 16 |
| F735-512 | Washer, Flat 3/8″ – BLACK | 8 |
THE FOLLOWING TOOLS ARE RECOMMENDED FOR ASSEMBLY:
SOCKET SET 3/8 DRIVE & 6” EXT
(Only 9/16 & 3/4 Sockets are needed)| OPEN & CLOSED WRENCHES
(Only 9/16 & 3/4 is needed)| TORQUE WRENCH 3/8
DRIVE
F735 – Product Assembly
TIP: Very stable and safe to start the Assembly STEPS when on its side,
horizontally NOT upright.
STEP 1: Installation of the Main Frame Assemblies Loosely attach the
Frame, Top, Rt & Lt Sides – Assembly (501-ASM) & the Frame, Bottom, Rt & Lt
Sides – Assembly (503-ASM) to the Frame, Uprights (502) using:
- Eight BOLTS, Hex 1/2″ x 2-1/2” (509)
- Sixteen WASHERS, Flat 1/2″ (511)
- Eight NUTS, Hex Lock 1/2″ (505)
** It is extremely IMPORTANT** that #502 is oriented correctly. See measurements below.
STEP 2: Installation of the Oly Plate Horns
Attach all the Oly Plate Horns (504-ASM) to the Frame, Uprights (502-ASM)
using:
- Eight BOLTS, Hex 3/8″ x 1-1/4” (510)
- Eight WASHERS, Spring 3/8″ (506)
- Eight WASHERS, Flat 3/8″ (512)
TIP: Keep bolts loose when installing on an F730 / F430 (Power Rack) or F738
(RFT).
Then level the Bottom Frames with the Adjustable Foot (514-ASM) on both sides.
STEP 3: Installation of the F735 Oly Plate Holder to an F730 / F430
(Power Rack) or F738 (RFT) Attach the Olympic Plate Rack Option (F735) to the
Upright, Rear, Right & Left Sides (5) using:
- Four BOLTS, Hex 1/2″ x 3-1/4” (508)
- Four BOLTS, Hex 1/2″ x 4-1/2” (507)
- Sixteen WASHERS, Flat 1/2″ (511)
- Eight NUTS, Nylon 1/2″ (505)
S TEP 4: “Torque Time” on all Frames & Oly Plate Horns
- Tighten to the recommended torque specs of 20 ft-lbs (+/- 2 lbs) on all 1/2” Bolts & Nuts.
- All 8 Bolts (#510) on the Oly Plate Horns to the torque specs of 17 ft-lbs (+/- 2 lbs).
- Tighten Jam Nuts on Adjustable Feet @ 7 ft-lbs.
Recommended Tools
TORQUE WRENCH w/ 9/16 & 3/4 SOCKETS & WRENCHES
|
---|---
http://www.bodycraft.com/F730-qr.html|
http://www.bodycraft.com/F738-qr.html
F735 – Detailed Parts List & Parts Exploded View
| Part # | Detailed Parts List | QTY |
|---|---|---|
| F735-501 | Frame, Top, Rt & Lt | 2 |
| F735-502 | Frame, Upright , for Oly Plate Storage | 2 |
| F735-503 | Frame, Bottom, Rt & Lt | 2 |
| F735-504 | Oly Plate Horn, Metal Tube | 8 |
| F735-505 | Nut, Nylon Lock 1/2″ – BLACK | 16 |
| F735-506 | Washer, Spring 3/8″ – BLACK | 8 |
| F735-507 | Bolt, Hex Head 1/2″ x 4-1/2″ – BLACK | 4 |
| F735-508 | Bolt, Hex Head 1/2″ x 3-1/4″ – BLACK | 4 |
| F735-509 | Bolt, Hex Head 1/2″ x 2-1/2″ – BLACK | 8 |
| F735-510 | Bolt, Hex Head 3/8″ x 1-1/4″ – BLACK | 8 |
| Part | Detailed Parts List | QTY |
| --- | --- | --- |
| F735-511 | Washer, Flat 1/2″ – BLACK | 32 |
| F735-512 | Washer, Flat 3/8″ – BLACK | 8 |
| F735-513 | Nut, Thin, M8 for Adj. Foot – BLACK | 2 |
| F735-514 | Adjustable Foot, for Lower Base Frame | 2 |
| F735-515 | End Plug, Rectangular | 4 |
| F735-516 | Oly Plate Holder, Plastic Sleeve | 8 |
| F735-517 | Oly Plate Holder, Plastic End Cap – Round | 8 |
| F735-518 | Oly Plate Holder, Rubber Cushion | 8 |
| F735-519 | Screw, Hex Recessed Flat Head 3/8″ x 1-1/4″ – BLACK | 8 |
Detailed Parts Exploded View
NOTE: Parts are not to scale
The Art and Science of Movement
****WWW.BODYCARAFT.COM
800-990-5556
[email protected]
BODYCARAFT.COM