BECKHOFF C6515-0060 Fanless Built-In Industrial PC User Manual
- June 5, 2024
- BECKHOFF
Table of Contents
- BECKHOFF C6515-0060 Fanless Built In Industrial PC
- Product status
- Industrial design
- Maximum data availability and data security
- Scalable performance
- Central EtherCAT controller
- Flexible expansion options
- Advantage at the very core the Beckhoff Industrial PCs
- Product information
- Options
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BECKHOFF C6515-0060 Fanless Built In Industrial PC
Product status
Regular delivery
The C65xx Industrial PC series is designed to be installed in the panels of
the control cabinet or in the rear panel of a control housing or console
housing. The heat sink of the Industrial PC is fed to the outside through a
suitable cut-out in the control cabinet or housing panel. Power dissipation
from the processor and chipset takes place directly to ambient. Integrated
seals provide for an IP65 closure. This enables high thermal stability and at
the same time fanless operation. Industrial PCs of type C65xx can hence be
constructed completely without rotating parts.
Industrial design
If the C65xx built-in PC is combined with a Beckhoff Control Panel, the result is a fanless Panel PC that enables operation up to an ambient temperature of 45 °C. The compact housing is equipped with a 3½ inch motherboard for Intel Celeron or Core i3/i5/i7 of the latest generation. All of the PC’s connectors are located on the top side of the housing.
Maximum data availability and data security
The PCs of the C65xx series are supplied with an integrated power supply unit with 24 V DC input voltage, optionally with integrated uninterruptible power supply (UPS). A battery pack can be connected externally and installed on a DIN rail close to the PC.
Scalable performance
Industrial PCs from this series, combined with the Beckhoff Control Panels as an operating unit, produce a powerful control platform for machine construction and plant engineering in particular with the TwinCAT automation software running on Windows 10 IoT Enterprise.
Central EtherCAT controller
Due to the two independent Ethernet interfaces, the C6515 and C6525 Industrial PCs are ideally suited for use as the compact central unit of an EtherCAT controller. Two hard disks, two SSDs or two CFast cards can be mirrored with the on-board SATA RAID 1 controller. If a RAID drive fails, the system continues to operate. The defective data carrier can be replaced while operation continues and the mirroring can be repeated.
Flexible expansion options
The C6515 and C6525 built-in PCs can be expanded by two additional PCIe module slots. The hood on the inside is manufactured 27 mm deeper for PCIe modules. The module slots can be populated by Beckhoff PCIe modules, for example by the FC9062 Dual Gigabit Ethernet module. The module slots also enable the use of fieldbus cards such as the FC3161. The C6525 Built in PCs can be expanded by two slots for standard PC plug in cards. They accept market-standard PC plug in cards up to a length of 190 mm. The 58 mm deeper hood at the rear covers a backplane that provides a choice of two PCI slots, two PCI Express slots or one PCI and one PCI Express slot. Card holders ensure the secure fixation of large cards.
Advantage at the very core the Beckhoff Industrial PCs
Beckhoff is a pioneer in PC based automation technology and has been developing and producing its own PC hardware since 1986. The technology know-how that has grown over the past decades is incorporated today into all Beckhoff Industrial PCs. Their principle feature is the use of state of the art components and processors of the highest performance class. Combined with a high in-house production depth, including proprietary motherboard production, long-term component availability, extremely flexible configuration and customer-specific adaptations, Beckhoff presents itself today as one of the world’s leading Industrial PC manufacturers.
Product information
Technical Data
C6515-0060
PCIe/PCI slots | 2 PCIe module slots | |
---|---|---|
Memory | 4 GB DDR4 RAM | up to 32 GB DDR4 RAM ex factory |
Graphic adapter | integrated in the processor | |
Ethernet | 2 x 100/1000BASE-T on-board | |
RAID | on-board SATA RAID 1 controller | |
Hard disks/flash | 40 GB CFast | up to 160 GB CFast |
Interfaces | 4 x USB 3.0, 1 x RS232, 1 x DVI | |
Power supply | 24 V DC | UPS |
Operating system
|
| Windows 7, Windows Embedded Standard
7, Windows 10 IoT Enterprise, Windows
| | Server 2016
Options
| |
Options| C6515-0060|
C9900-C607 processor 6th generation Intel Pentium G4400TE, 2.4 GHz, 2
cores TC2, TC3: 50 instead of Intel Celeron G3900TE 2.3 GHz TC2, TC3: 50
Options
C6515-0060
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>