DS18 JSD8 Marine Double 8 Inch Speaker Enclosure Loaded with Coaxial Speakers With Built-In RGB Led Lights Owner’s Manual
- June 5, 2024
- DS18
Table of Contents
DS18 JSD8 Marine Double 8 Inch Speaker Enclosure Loaded with Coaxial
Speakers With Built-In RGB Led Lights
MARINE DOUBLE 8″ SPEAKER ENCLOSURE LOADED WITH COAXIAL SPEAKERS WITH BUILT-IN RGB LED LIGHTS
General Specifications
- Nominal Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dual 8” (NXL-8)
- Nominal Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4. . o hms (Each)
- RMS Power Handling . . . . . . . . . . . . . . . . . . . . . . . .2 .5 0W (Total) 125W (Each)
- MAX Power Handling . . . . . . . . . . . . . . . . . . . . . . . .7 50W (Total) 375W (Each)
- Sensitivity (1w/1m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 6 dB (Combined)
- Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 .5 . Hz – 23KHz
- Recommended Hi Pass Crossover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Hz
- Marine Grade Compliant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I P. .6 5
Speaker Specifications
- VC Diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 . ..2 . ”.
- Cone Material …………………………………..Waterproof Injection Polypropylene
- Dust Cap Material. . . . . . . . . . . . . . . . . . . . . . . .W . aterproof Injection Polypropylene
- Surround Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B. .u .t .y l
- Basket Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P . C Injection Molded Composite
- Magnet Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F. .e rrite + Reverse Neodymium
- Magnet Grade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y . 3. .5 + N40H
Tweeter Specifications
- VC Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. ”. . . .
- Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D. .o . m. e PEI Surround
- Diaphragm Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T. .i t. a. nium
- Magnet Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N . e. .o dymium
- Crossover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 . d. .B ./ Oct
Enclosure Specifications
- Internal Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2. .0 .. .9 L
- Load Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F . r. o. ntal
- Box Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S. .e .a . l.e d
- Box Material . . . . . . High Density Plastic Molded with Color Injected (LLDPE)
Measurements
- Overall Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 . ..4 . 6″ / 240.4mm
- Overall Width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 .6 . ..3 4″ / 669mm
- Overall Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 4. .. 14″ / 359.2mm
Features
- 8 Core Wires For Lighting and Speaker . . . . . . . . . . . Stereo (separate) speaker configuration + RGB wires
- Integrated LED-RGB Lighting . . . . . . . . . . . . . . . . L. ogo Badge and Speaker Cone For All Elements – Marine, ATV/UTV & Jeep
Measurements
Installation
- To connect without LED Control Module (LED-BTC),
- Connect as shown in the Following Diagram:
- Black wire “BK” Connected to Battery Positive (+) 12V
- White Color Light “R”; “B” and “G” Connected to Battery Negative (-)
- Green Color Light “G” Connected to Battery Negative (-)
- Red Color Light “R” Connected to Battery Negative (-)
- Blue Color Light “B” Connected to Battery Negative (-)
- Purple Color Light “R” and “B” Connected to Battery Negative (-)
- Yellow Color Light “R” and “G” Connected to Battery Negative (-)
- Cyan Color Light “B” and “G” Connected to Battery Negative (-)
ESPECIALLY DESIGNED FOR JET SKI
WARNING
- Be sure to carefully read and understand the instructions before attempting to install these speakers.
- For safety, disconnect the negative battery terminal from the battery prior to beginning the installation.
- For easiser assembly, we suggest you have all your tools handy, Drill, Allen set, Crimps, Soldering iron, wire strippers, heat-shrink, etc.
- Use high quality “Waterproof” connectors for a reliable installation and to minimize signal or power loss.
- Think before your drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle. If installing in a boat, take care not to cut or drill through the main hull
- Never run wires near fuel lines or power (if possible). Running the wires inside the hull area provides the best protection.
- Avoid running wires over or through sharp edges. Use rubber or plastic Grommets to protect any wires routed through metal, especially the tower.
- Make sure that the mounting clamps are tight before leaving the dock.
- Decide early what type of LED lighting you want (if any) and wire accordingly.
( Note: if you want dancing lights look for the WiFi or RF remote- controlled LED light box. The easy way to have lighting… YOUR way!)
FOR MORE INFORMATION
PLEASE VISIT: DS18.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>