iLive Radio Frequency Wireless Headphones User Manual

iLive Radio Frequency Wireless Headphones

Specifications

• BRAND : ILive
• MODEL NUMBER : IAHRF79B
• COLOR : Black
• CONNECTIVITY TECHNOLOGY : Bluetooth
• WIRELESS COMMUNICATION TECHNOLOGY : Bluetooth, RF
• WIRELESS RANGE: 100 feet
• BATTERY LIFE : 7 hours at 100 percent volume
• PRODUCT DIMENSIONS : 6.7 x 3 x 7.68 inches
• ITEM WEIGHT : 1.8 pounds
• BATTERIES : 1 Lithium-Ion battery

Specifications

You’ll be cozy enough to spend hours binge viewing your favorite TV episodes, movies, and other media thanks to the adjustable headband, soft, cushioned ear pads, and full wireless freedom. Recharging is made simple with a docking station and transmitter that are included, so you won’t ever have to bother your partner, housemates, kids, or neighbors. With the accompanying cables (aux in, optical audio, and the aux in to RCA audio adapter), you can easily connect to your system and enjoy listening to your entertainment in privacy.

FEATURES

• 49mhz Radio Frequency (RF) technology
• Operating distance up to 30 ft (10m)
• No line-of-sight limitations works through walls
• Cushioned headband and ear cups
• Power switch built into telescoping antenna
• line-in jack for optional direct-to-source connection

BATTERY INSTALLATION

FOR HEADPHONES

1. Open the battery compartment cover by sliding the latch forward and then pulling up Insert two (2) AAA 1.5V Alkaline batteries into the battery compartment with the (+) and (-) poles correctly aligned
2. Secure the battery cover before use

FOR TRANSMITTER

1. Remove screw to access the battery compartment Insert three (3) AAA 1 5VAlkahne batteries with the (+) and (-) poles correctly aligned
2. Before use, secure the compartment cover by tightening the screw.

BATTERY SAFETY INFORMATION

ALWAYS:

• Make sure battery compartments are secure.
• Use batteries of the correct size and type.
• Fit batteries correctly observing the plus (+) and minus (-) marks on the battery and compartment.
• Replace a whole set of batteries at each time
• Remove dead batteries from equipment.
• Remove batteries from appliance that will not be used again for a long time.
• Please remember that small button cells and AAA batteries should be kept away from young children as they could be easily swallowed. Seek medical advice if you believe a cell has been swallowed.

NEVER:

• Mix different types of batteries.
• Mix old and new batteries.
• Dispose of batteries in a fire.
• Do not attempt to recharge ordinary batteries.

PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.

CONNECTING THE WIRELESS TRANSMITTER

The Wireless Speaker System is supplied with a universal audio cable. This cable can be connected to the audio source outputs with the 3 5mm plug or the red/white RCA plugs.

NOTE: THE HEADPHONES SET WILL NOT FUNC­ TION PROPERLY WITH THE 3.SMM ANO RED/WHITE RCA PLUGS AT THE SAME TIME.

1. Connect the single 3.5mm plug to the Line-in jack at the back of the transmitter.
2. Connect the opposite end of the cable (with 3.5mm/ red/ white plugs) to your audio source. You only need to connect either the 3.5mm plug or the red\white RCA, whichever is applicable. On most audio devices (including some TVs) you can connect the 3.5mm plug to the headphones jack
3. Switch “OW the transmitter by lifting up the antenna to an up-right position. The red LED power indicator will illuminate. Extend the antenna for maximum range
4. Turn the Headphones ON by pressing the power switch The red LED power indicator will illuminate. Adjust the volume by rotating dial, “+” to increase the volume.

SAFETY INSTRUCTIONS

• Do not use your headphones when driving a car, motor­ cycle, or bicycle. This may result in an accident
• Longtime exposure to loud music may cause hearing damage. Please avoid using extreme volume when using your headphones, especially for an extended period of time
• Water may damage the electronic components of your headphones

GENERAL INFORMATION

• II is technically possible to use an additional number of FM wireless headphones with a single transmitter if they can:
• Operate in the 49 MHz band
• Work according to the same modulation scheme
• Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment
• Hearing Safety! Continuous use at high volume may damage your hearing permanently
• Remove the batteries from the headphone and transmitter battery compartments if the unit will not be used for a long period of time
• Do not disassemble the product

CAUTIONS! Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply With the limits for a Class B digital device. pursuant to Part 15 of me FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. 33 •- Increase the separation between the equipment and receiver. — connect the equipment into an outlet on a circuit different from that to which the receiver is connected – Consult the dealer or an experienced radio/TV technician for help.

This Category II radiocommunication device complies with Industry Canada Standard RSS-310. Operation Is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device complies with Pan 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any. interference received, including interference that may cause undesired operation

Frequently Asked Questions

• How are Ilive wireless headphones recharged?
  Connect the device’s Micro-USB charging connector to the USB port of a running computer or USB power source using the provided Micro-USB charging cable (not included). Now the device can charge.

• How can you tell when an Ilive speaker has finished charging?
  When charging, the charging status LED is solidly red. The light will go out when the device is fully charged. DC Power Input: Use this to power the speaker and charge the internal battery.

• How do you activate pairing mode on Ilive headphones?
  When you unplug both earbuds and press the function button, you can link them together. Both headphones will instantly flash red and blue to let you know they are hot. Using the Function button on the right earbud, you can pair your headphones.

• How long does it take to charge an Ilive wireless earbud?
  To charge, connect the provided USB cable to a USB port on a working computer. Before using, thoroughly recharge. When charging, the indicator will flash red; when fully charged, it will turn blue. The first charging takes about two hours.

• How do I utilize an app for iLive Platinum?
  Simply connect your iLive speaker to your Wi-Fi network and use the iLive Wi-Fi app to stream music wirelessly. Visit https://iliveelectronics.com/platinum/speakers.html to purchase an iLive Wi-Fi speaker.

• How can my iLive be connected?
  Press “Add Device” while the iLive Wi-Fi app is open. To enter the appropriate information, hold down the Pair (WPS) button on the speaker while doing so. As the speaker and your Wi-Fi network are configured, the app will show its progress.

• How do my Ilive Bluetooth earbuds get charged?
  Charge the case by connecting a Micro-USB to USB cable to a USB port on a working computer or a USB power supply (not provided). As the case charges, a blue light flashes. Blue when the case is turned on. Each LED displays the battery level.

• Should I always have earbuds on hand?
  The majority of cases have a lithium-ion battery that keeps the earphones charging until they are fully charged. The earbuds should always be kept on hand just in case.

• How long do earbuds take to charge?
  The earphones need about two hours to fully recharge. If the battery is low, you can extend its life by 10 to 20 minutes by charging it in the charging case. Connect the charging case to an approved wall charger or USB power source.

• How much time can earbuds be charged?
  According to Apple, a pair of AirPods should last approximately five hours of music playback or approximately two hours of call time before requiring recharging. 11 hours of speaking time or about 24 hours of charge time should be possible with this case.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>