toboli 62638/62639 Aluminium Kayak Trolley Instruction Manual
- June 5, 2024
- toboli
Table of Contents
toboli 62638/62639 Aluminium Kayak Trolley
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.
Parts list
Assembly
- Remove the round axle from the axle sleeve.
- Loosen the knobs on the clamping block
- Slide the square axle through the hole in the clamping block. Slightly open the clamping block if necessary.
- Repeat steps 1–3 to fit the other end of the axle to the clamping block
- Adjust the clamping block on the axle sleeve. The scales on the axle sleeve can help. Tighten the knobs on both clamping blocks.
- Fit the round axle into the axle sleeve and lock the pins.
- Loosen and remove pins on the round axle. Fit the wheels on the axle. Lock the pins on the round axle.
Operation
- Place the kayak onto the cart with its weight centered on the cart.
- Use the tie-down strap to secure the kayak to the cart.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual,
requires a written permission of WilTec Wildanger Technik GmbH.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>