toboli 62832 Floor-Mounted 2-Bike Rack Instruction Manual
- October 30, 2023
- toboli
Table of Contents
Product Information: Floor-mounted 2-bike Rack
The Floor-mounted 2-bike Rack, item number 62832, is a high-quality product designed to securely store two bicycles. The product comes with a base leg, base support leg, connection bar, tire loop, and tire loop support. It also includes four M8 washers and all necessary tools required for assembly. The product user manual provides detailed information on the assembly process and safety guidelines that should be followed when using the product. The manual also contains the contact information for the manufacturer and instructions for returning orders for exchange, repair, or other purposes.
Product Usage Instructions
- Read and follow the operating instructions and safety information carefully before using the Floor-mounted 2-bike Rack for the first time.
- Check that all parts are included in the package before beginning assembly.
- Assemble the bicycle rack by following the instructions provided in the user manual.
- Tighten the bolts by hand until the entire part is fitted. When all the parts are fitted, tighten all the bolts with wrenches.
- Place the bicycles onto the tire loops and secure them in place.
- Ensure that the bicycles are securely fastened to the rack before leaving them unattended.
If you have any further questions or concerns regarding the usage of this product, please contact the manufacturer’s customer service team for assistance.
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury
we urge that our clients take some basic safety precautions when using this
device. Please read the operation instruc-tions carefully and make sure you
have understood its content.
Keep these operation instructions safe.
General guidelines and safety
- It is the use’s responsibility to read and follow all instructions
- Inspect the product before use to ensure that it is properly assembled and that all parts function safely and are free from defects.
- Never modify this product in any way.
- Not all circumstances can be covered in these instructions. Please use the appliance properly and follow general safety precautions when using this product.
Parts list
Tools required
- 10 mm wrench
- 14 mm wrench
Assembly instructions
When assembling the bicycle rack, tighten the bolts by hand until the entire part is fitted. When all the parts are fitted, tighten all the bolts with wrenches.
There are two options for assembly.
- Option 1 is designed so that both bicycles are on one side.
- Option 2 is designed so that one bicycle can be mounted on either side of the stand.
Option 1
-
Step 1
Attach the tyre loop (D) to one of the base legs (A) using M6×20 screws (F). -
Step2
Attach the tire loop supports (E) to the other base leg (A) using M6×20 screws (F). -
Step 3
Fit the two base leg assemblies together and se-cure with M6×20 screws (F). -
Step 4
Fit the connector bar (C) between the two tire loops (D) and secure with M6×20 bolts (F). -
Step 5
Fit the base support bar (B) between the two base legs (A) and secure it with M6×65 screws (G) and washers (H). Securely tighten all bolts with wrenches.
Option 2
-
Step 1
Attach one tire loop (D) and one tire loop sup-port (E) to one of the base legs (A) using M6×20 bolts (F). -
Step 2
Repeat step 1 on the other base leg. -
Step 3
Fit the two base leg assemblies together and se-cure with M6×20 bolts (F). -
Step 4
Fit the connector (C) between the two tire loops (D) and secure with M6×20 bolts (F). -
Step 5
Fit the base support bar (B) between the two base legs (A) and secure with M6×65 bolts (G) and washers (H). Securely tighten all bolts with wrenches.
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in
part, of this instruction manual require the written permission of WilTec
Wildanger Technik GmbH.
© by WilTec Wildanger Technik GmbH
Item 62832
http://www.toboli.com
The information contained in this document may alter at any time without
previous notice. It is prohibited to copy or spread any parts of this document
in any way without prior written allowance. All rights re-served. The WilTec
Wildanger Technik GmbH cannot be held accountable for any possible mistakes in
this operating manual, nor in the diagrams and figures shown. Even though, the
WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless, and up to date, mistakes
cannot be entirely avoided. If you should find a mistake or wish to make a
suggestion for improvement, we look forward to hearing from you.
Send an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in
our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the
following address.
Attention! To allow for a smooth execution of your complaint or return,
it is important to contact our customer service team before returning the
goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>