toboli 64194 Battery Powered Camping Lamp Instruction Manual
- June 2, 2024
- toboli
Table of Contents
- toboli 64194 Battery Powered Camping Lamp
- Product Specifications
- Product Usage Instructions
- Introduction
- Technical specifications
- Names of components and dimensions
- Inserting the batteries
- Operating the lamp without light diffusor
- Using the switch
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
toboli 64194 Battery Powered Camping Lamp
Product Specifications
- LED Power (W): 10
- Brightness (lm): 1000
- Colour Temperature (K): 3000 / 6000
- Number of LEDs: 46
- Lighting Modes: Daylight white, warm white, combined, flash light
- Discharging Time (h): 25 (warm white mode) / 18 (daylight white mode) / 12 (combined)
- IP Code: IPX4
- Batteries Required: Three 1.5-V batteries, D size (not included)
Product Usage Instructions
Inserting the Batteries:
- Turn the lamp upside down and unlock the base.
- Insert the batteries in the correct direction. Caution: Do not use rechargeable batteries!
- Replace the base while ensuring the pin is at the correct position.
- Re-lock the base by turning it.
Switching On and Off:
- Step 1-2: Daylight white, Warm white
- Step 3-4: Combined, Flashlight
- Step 5: Off
FAQ:
Q: Can I use rechargeable D-size batteries with this lamp?
A: No, do not use rechargeable D-size batteries to power the lamp as
per safety instructions.
Q: What should I do if the lamp malfunctions?
A: Contact customer service for troubleshooting before returning the
product.
Q: How do I dispose of this product?
A: Follow regulations for waste disposal as per the Waste Electrical
and Electronic Equipment Directive.
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate
insignificantly due to continuous further developments.
The information contained in this document may alter at any time without prior
notice. No part of this document may be copied or otherwise duplicated without
prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes
in this operating manual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to
ensure that this operating manual is complete, accurate, and up to date ,
errors cannot be ruled out
If you have found an error or wish to suggest an improvement, we look forward
to hearing from you.
Send us an email to: service@wiltec.info or use
our contact form: https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in
our online shop: https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return your goods
for exchange, repair, or other purposes , please use the following address.
Attention! To allow for a trouble-free complaint or return, it is important to
contact our customer service team before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany
Email: service@wiltec.info
Tel: +49 2403 55592-0
Fax: +49 2403 55592-1 5
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk
of injury, we ask you to always take some basic safety precautions when using
this product. Please read this operating manual carefully and make sure that
you understand it.
Keep these operation instructions in a safe place.
Safety instructions and general notes
- Before the first use, check the lamp.
- Insert suitable batteries in the correct direction.
- The device has the IP code IPX4 (splashproof). This means that it cannot be submerged into water without damage.
- The lamp must not be retrofitted during the warranty time.
- The lamp has no memory function.
Warning!
Do not use rechargeable D size batteries to power the lamp.
Technical specifications
| LED power (W) | 10 |
|---|---|
| Brightness (lm) | 1000 |
| Colour temperature (K) | 3000 / 6000 |
| Number of LEDs | 46 |
| Lighting mode | Daylight white, warm white, combined, flashlight |
| Discharging time (h) | 25 (“warm white” mode) / 18 (“daylight white” mode) |
/ 12 (combined)
IP code| IPX4
Batteries required| Three 1.5-V batteries, D size (not included)
Operating temperature (℃)| –25–40
Names of components and dimensions
| № | Name |
|---|---|
| 1 | Handle |
| 2 | Light diffusor |
| 3 | Switch |
| 4 | Battery box |
| 5 | 1.5-V batteries, D size (not included) |
| 6 | Base |
| 7 | Hook |
Inserting the batteries
-
Turn the lamp upside down and unlock the base by turning it.
-
Insert the batteries in the correct direction.
Caution: Do not use rechargeable batteries! -
Replace the base while making sure that the pin is at the correct position (see arrow).
Operating the lamp without light diffusor
- Turn the lamp upside down and push it down as shown.
- Unlock the lock between the lamp and diffuser (see the direction of arrows). For later re-locking, turn in the opposite direction.
- The lamp is lit without light diffusor.
Using the switch
Switching on and off
Swapping between the modes
Step| Explanation| Step| Explanation| Step|
Explanation
---|---|---|---|---|---
1| Daylight white| 3| Combined| 5| Off
2| Warm white| 4| Flash light| |
Maintenance
- When the lamp will not be used during a prolonged period, take out the batteries; thus, you avoid consequential damages from the batteries leaking.
- For cleaning, do not use chemical dissolvers.
- For improved lighting results, regularly wipe off the lamp.
Regulations for waste disposal
The Waste Electrical and Electronic Equipment Directive (WEEE Directive,
2012/19/EU) of the EU was implemented in the German law related to electrical
and electronic equipment and appliances.
All WilTec electric devices that fall under the WEEE directive are labelled
with the symbol of a crossed-out wheeled rubbish bin. This symbol indicates
that this electric device must not be disposed of with the domestic waste.
WilTec Technik GmbH is registered with the German registration authority EAR
(Stiftung Elektro Altgeräte Register) under the WEEE registration number
DE45283704.
Disposal of used electrical and electronic devices (intended for use in the
countries of the European Union and other European countries with a separate
waste collection system for these devices).
The symbol on the packaging or the product itself indicates that this product
must not be treated as normal domestic waste but must be disposed of at a
recycling collection station for electrical and electronic waste.
By disposing of this product correctly, you contribute to the protection of
the environment and the health of your fellow people. Inappropriate disposal
threatens the environment and health.
Material recycling helps to reduce the consumption of raw materials.
Additional information about the recycling of this product can be provided by
your local commune, the municipal waste disposal facilities, or the store
where you purchased the product.
Address:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
52249
Eschweiler Germany
Important note:
Reproduction and any commercial use (of parts) of this operating manual,
requires a written permission of WilTec Wildanger Technik GmbH.
© by WilTec Wildanger Technik GmbH
http://www.toboli.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>