Citaq T80 PLUS POS SYSTEM User Manual

: June 5, 2024
: Citaq

Table of Contents

Installation Guide
Installation and operation guide of the machine
FCC Caution
Read User Manual Online (PDF format)
Download This Manual (PDF format)

T80 PLUS POS SYSTEM
User Manual

Notice：

The main unit and switch should only be disassembled by qualified maintenance personnel.
Battery replacement
1. Be sure to use the battery “CR2032”. There is a risk of explosion if you replace the battery with the wrong model!
2. After the replacement, please leave the battery to the maintenance personnel. DO NOT throw it into the fire

Installation Guide

Characteristic and Application
With years of professional POS equipment manufacturing experience, we’ve learned perfectly the needs of customers. Following the design concept of Yibao series, a hot sale series in the last ten years, we bring you a whole new POS series: the Inpos series. It’s a series with higher stability, more comprehensive performance, more stylish appearance for your better experience of quality. Also, it’s highly cost-effective just like the Yibao series. We are always by your side on the way to success.
The Infos series POS system is designed for commercial use, such in shopping centers, department stores, supermarkets, and convenience stores.
Component of the machine
Its main components and functions are shown in the figure:
Parameters

CPU	Code name	Bay Trail
Model	Intel Celeron J 1900
Core number	Quad-Core
Process	22nm
Cache	2MB
GPU	Graphics Model	Intel HD Graphics
Frequency	688MHz
RAM	Model	DDR3L
Memory	8GB
Interface	SODIMM
HDD	Model	SSD
Memory	128G
Interface	MSATA
Touch Screen	Dimension	15.6″
Type	Capacitive Touch screen
Touch	Single Point Touch
Technology	GFF
Interface	IIC
Display	Dimension	15.6″
Type	TN
Resolution	1366*768
Brightness	More than TYP220cd/m2, LED backlight
Interface	eDP
Rotation Angle	>80°-45 ”
Brightness	More than 22cd/m2
Color	Orange
Rotation Angle	?80°-45 °
Data Command	ESC/POS order set
Interface	USB, Enumeration System Serial port
Speaker	Power	1W*2
Volume	..?- 90dB
Interface	Audio L/R
Sound Track	Left and right soundtrack

External
interface| USB 2.0| Rare x 5
USB3.0| Front x 1
LAN| RJ45 x 1,100/1000M Self-adjusting
Serial Port| DB9 x 2, available for OV\5V\12V
Audio Jack| 3.5mm xl
Cash drawer port| RJ12,6P6C x 1
Power interface| DIN 4PIN x 1
Switch| | Light touch switch
Electrical parameters

Citaq T80 PLUS POS SYSTEM - figure 2

Installation and operation guide of the machine

Installation Citaq T80 PLUS POS SYSTEM - figure 3

First, lift the cover of the main unit as shown in figure (1), insert the 4pin plug into the host jack as shown in figure(2), then plug the mains plug into the triple socket as shown in figure(3).

Interfaces of the machine Citaq T80 PLUS POS SYSTEM - figure
4

Interface in the mainboard Citaq T80 PLUS POS SYSTEM - figure
5

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable devices:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

RF warning for Mobile devices:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.