kmart 43094936 Gamers Streaming Light Instructions

Gamers Streaming
Light Instructions

WARNING:

1. Only qualified service technicians or service agents should attempt to repair this product.
2. The power cable cannot be replaced, if it is damaged the light should no longer be used.
3. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualied person.
4. The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
5. Not suitable for mounting on tubular material.

Specifications:

Package Includes:

Streaming Light Product Information:
66 Premium LED Beads.
10W Output.
USB Powered.
3pce Colour Filters (Red, Yellow, Blue).

Installation method:

Attaching the Streaming Light to the pole mount

1. Insert the threaded connector into Cardan Joint and insert it into one of the hole positions.
   Note there are three positions that can be used. Ensure the 3/8” thread is inserted into the hole leaving the ¼” thread visible.

2. Connect the ball joint thread to the thread in the base of the LED light panel.

3. Insert the ¼” screw end into the ball joint thread and tighten.

Attaching the Pole to Clamp

1. Insert the screw end into the clamp thread and tighten.
   

2. Align the screw holes from the top and base of clamp parts and attach the two nuts through the holes.
   The thickness of your desk/ table that you are mounting the light will depend on which screw holes you select.

Mounting the Desk Clamp

1. Unscrew the clamp so that the opening is large enough to fit over the edge of your table.
2. Push the clamp all the way onto the table edge for maximum security.
3. Fasten the clamp to the desk by turning the handle so that it is tight against the underside of the table. Note: Make sure that the clamp sits flush on both the top and bottom surfaces of the table.
4. Test that you have mounted the clamp securely by seeing if you can pull it off the edge of the table. Tables with round edges provide less security than those with square edges.

Pole Height

Streaming Light Operation

Connect the USB cable to the compatible USB power adapter. Press the On/ Off button

1. UP Button
   Press once to increase light by 10% or long-press to increase to the desired light level.

2. ON/OFF Button
   Press once to turn the light on or off. The default brightness is set to maximum.

3. DOWN Button
   Press once to reduce the brightness by 10% or long-press to reduce to the desired light level.

Colour Filter

Slide the desired color filter (supplied) into the slot surround on the LED panel. Remove by gently sliding back out of the slot.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>