MERPOWR GP12 Laptop Power Bank User Manual

MERPOWR

LAPTOP POWER BANK
USER ‘S MANUAL

Thanks for choosing our product, please read the manual carefully before using

Technical Specifications

Name： laptop power bank
Capacity: 88.8Wh / 24Ah @3.7V/24000mAh
DC Input:12-24V/ 2A(max)
TYPE-C input： DC5V/3A 9V/3A 12V/3A 15V/3A 20V/3A
USB output: 5V/4.5A 4.5V/5A 9V/2A 12V/1.5A
USB-C output1：DC5V/3A 9V/3A 12V/3A 15V/3A 20V/3A
USB-C output2：DC5V/3A 9V/3A 12V/2.25A(PPS:3.3-11V/3ADC Laptop output:12V/4A 16.5V/4A 20V/4A 24V/3.5A
Wireless：10W
Size：12212228mm
N.W：500g

Package Contents

Identification of parts

Charging power bank

Two recharge ways: DC port Input/ USB-C port Input

1. Plug the adapter`s cable into the DC / type-C input port of the power bank
2. Connect the Adapter to AC 100V-240V
3.  The power bank starts to charge automatically. Please see the below details:
   Charging time: DC port supports Solar panel Max 48W charging,(It can be fully charged to the power bank in 2.5-3 hours)
   Support USB-C Max 60W charging (1.5-2 hours can fully charge the power bank)

Charging LED Display
First Light blinking: <25%
First light on, second light blinking: 25% – 50%
Two lights on, third light blinking: 50% – 75%
Three lights on, fourth light blinking: 75% – 99%
Four lights on: Fully charged

To charge your devices

1. Support Devices: Mobile phones, Tablet PC, Digital Camera, and other digital devices
2. Plug a USB cable into one of the Output ports
3. Connect the cable with your device
4. The power bank starts discharging automatically

Use power bank to charge laptop

1. Firstly choose the correct Laptop DC connector before charging your laptop
2.  Keep long-press the power button until the LED screen is turned on. Then choose the right working voltage according to the laptop charging voltage. The first stage voltage is  12V, the Second is 16.5V, the third is 20V, and the Fourth stage is 24V. Followed By Recycling 3. Connect the laptop connector after choosing the correct voltage. The laptop starts charging

How to reset the voltage : Two methods of operation are as follows:

1.  Long press for 3S to turn off the output. Hold the button for 3S, the voltage can be adjusted when the red light flashes
2. Unplug the DC output device for the 60S, Then long press the voltage button until the red light flashes, you can adjust the Voltage

Wireless charging
Click to turn on the power bank, and Re-Click the power button to turn on the wireless.
The wireless is working when the green light flashes

Usage Notes

1. DC and USB-C1 ports share one circuit, So these two ports can`t work at the same time
2. The fast charging function will be canceled once USB-A and USB-C2 discharge at the same time.
3. To protect the battery cycle life, Please unplug the charging cable after fully charged
4.  Keep the product away from extreme heat or cold, as well as any flammable
5. Run a full charge/discharge cycle at least once every four months to avoid shortening the life span of the internal battery.
6. If long-term storage is likely to occur between uses, we recommend storing at approximately 50% of full charge.
7. When supplying power to different devices, the device will be charged and the charging cable will lose 10-20% of the power. Suggest using the original cable
8. It is not recommended to use this power bank in an environment below 0℃ or above 40℃.
   To avoid causing irreparable damage to the internal battery

FAQ

1. What should we do if the power bank cannot be charged?
   Check whether the charging adapter is connected correctly and whether 100V- 240V AC charging is on if the problem still exists. Please contact the supplier for more professional advice.

2. What do we do if the power bank can’t charge other devices? Check that the charging line is inserted in the correct place, or Please confirm the output of this power bank is compatible with the device’s charging voltage Refer to your device’s manual, product label, or adapter for this information.

Warranty

We provide customers with a comprehensive warranty of 12 months from the date of purchase.

FCC STATEMENT

This device complies with Part conditions: 15 of the FCC Rules. Operation is subject to the following two (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning:
compliance could void the user’s authority to operate the equipment. Changes or modifications not expressly approved by the party responsible for
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Par reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: t 15 of the FCC Rules. These limits are designed to provide
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. tenna.

RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>