steelseries Arctis Nova 5 Wireless Headset User Guide

June 5, 2024
SteelSeries

steelseries Arctis Nova 5 Wireless Headset User Guide
steelseries Arctis Nova 5 Wireless Headset

GENERAL

PACKAGE CONTENTS
  • Arctis Nova 5 Headset
  • Wireless Dongle
  • USB-C to USB-A Adapter Cable
  • Charging Cable
SYSTEM COMPATIBILITY
  • PC
  • PlayStation 5
  • PlayStation 4
  • Android
  • Nintendo Switch
SOFTWARE

SOFTWARE

Use Engine inside Steel Series GG to set custom equalizer settings and control your mic.
GG also has other amazing apps like Sonar, a breakthrough in gaming sound, that allows you to hear what matters most, through cutting-edge audio tools.

DOWNLOAD NOW
steelseri.es/gg

PRODUCT OVERVIEW

HEADSET
  1. Elastic Headband*

  2. Air weave Ear Cushions*

  3. Retractable Clear Cast Microphone

  4. Microphone Mute LED

  5. Volume Wheel

  6. Microphone Mute Button

  7. USB-C Charging Jack

  8. Power Button

  9. Power Indicator LED
    Product Overview
    DONGLE

  10. Wireless Dongle*

  11. Pairing Button

  12. Status LED
    DONGLE
    **ACCESSORIES***

  13. USB-C to USB-A Adapter Cable*

  14. Charging Cable*
    Accessories

SETUP

CONNECTIONS

CONNECTIONS

  • PS5 SETTING > AUDIO OUTPUT
    Output to Headphones All Audio

  • PS5 SETTING > AUDIO OUTPUT > VOLUME
    Headphones Set to Max

POWER

POWER ON/OFF

Press and hold the Power Button (8) for 1 second to power the headset on/off.
When the Headset is powered on and connected, the Dongle’s Status LED (12) turns solid.
POWER ON/OFF

CHARGING

To charge the headset, connect the Charging Cable* (14) from the Headset’s USB-C Charging Jack (7) to any USB power source.

The color of the power LED indicates the battery level.

Green 100–50%
Yellow 49–15%
Red 14–5%
Red (fast blink) 4–1%

PAIRING

Note: The headset and dongle come paired

If you need to re-pair:

  1. Connect the Wireless Dongle (10) to your gaming device
  2. Press and hold the Dongle’s Pairing Button (11) for 4s until the Power Indicator LED (9) blinks rapidly
  3. With the headset off, press and hold the Power Button (8) for 4 seconds until the Power Indicator LED (9) blinks rapidly
  4. When pairing is successful you will hear a tone, and the Dongle’s Status LED (12) will turn solid
    Pairing

MULTIMEDIA CONTROLS

Answer/End Voice Call
Single · press the Power Button (8)

Play/Pause Music
Single · press the Power Button (8)

Skip Track
Double ·· press the Power Button (8)

Previous Track
Triple ··· press the Power Button (8)

MICROPHONE

RETRACTABLE MICROPHONE

Out of the box, the Retractable ClearCast Microphone (3) is retracted. To use the microphone, slide it away from the headset until it reaches full extension.

POSITIONING

Position the Retractable ClearCast Microphone (3) close to the corner of your mouth with the front surface facing you.

Note: The microphone should not be used when retracted.
POSITIONING

PERFECT FIT

There are two ways to adjust the fit of your headset
Slide the Earcups up or down to change the overall height.
Perfect Fit

Change the position of the Elastic Headband (1) on one or both sides to achieve the desired tension and flex.
Position of the Elastic Headband

TRANSLATIONS

DEUTSCH

ALLGEMEIN
LIEFERUMFANG
Artist Nova 5 Headset
Wireless-Dongle
USB-C- auf USB-A-Adapter Cabel
Lade Cabel

KOMPATIBILITÄT
PC, PlayStation 5, PlayStation 4, Android, Nintendo Switch

REGULATORY

Europe – EU Declaration of Conformity

Hereby, SteelSeries ApS. declares that the equipment which is compliance with directive RoHS 2.0 (2015/863/EU), R.E.D (2014/53/EU), EMC Directive (2014/30/EU), and LVD (2014/35/ EU) which are issued by the Commission of the European Community.

The full text of the EU declaration of conformity is available at the following internet address:
https://steelseries.com/

Steel Series ApS. hereby confirms, to date, based on the feedback from our suppliers indicates that our products shipping to the EU territory comply with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals – (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products.

Frequency bands and Powers (Headset and Transceiver)

  • Frequency band(s) in which the radio equipment operates: 2.400 – 2.4835 GHz
  • Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:
    • EIRP: GFSK: 8.11 dBm (Wireless Headset)
    • EIRP: GFSK: 6.62 dBm (Transceiver)
  • Firmware Version: V1.00

UK Declaration of Conformity

Hereby, Steel Series ApS. declares that the following equipment which is compliance with Electromagnetic Compatibility Regulations 2016, Electrical Equipment (Safety) Regulations 2016, Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 issued by the Department for Business, Energy& Industrial Strategy.

The full text of the UK declaration of conformity is available at the following internet address:www.steelseries.com

WEEE
This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.

Turkey RoHS Compliance
Republic of Turkey: In conformity with the EEE Regulation

Safety Guideline for Lithium Battery
This battery must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement, the device can be used in portable exposure condition without restriction.
FCC ID: ZHK-HS26 (Wireless Headset)
FCC ID: ZHK-HS26TX(Transceiver)

Region Address Telephone
USA Steel Series ApS., 656 W Randolph St., Suite 3E, Chicago, IL 60661, USA

+1 312 258 9467

Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.

The appliance must not be exposed to splashes or drops of water and it should not be used as a support for any object filled with liquid, such as a vase.

“CAUTION!”
RISK OF EXPLOSION IF BATTERY PACK IS NOT REPLACE BY SAME TYPE AS SPECIFIED BY THE MANUFACTURER. 

Please keep follow all listed important warnings and cautions below while using this battery pack to avoid any damage or hazard.

  1. The battery polarity (+) and (-) shall not be connected and charged reversely. Risk of explosion if the battery polarity (+) and (-) is reversed.
  2. Please keep this battery pack away from fire and high heat sources due to the explosion that might happen. Do not place your battery pack close to any heater or hot location.
  3. This battery pack shall not be hit or impacted. This battery pack shall not be dealt with any sharp or keen objects either.
  4. This battery pack shall not be exposed to moisture, dripping or splashing.
  5. If any electrolyte flows out of this battery pack when touching the user’s eyes and skin, please seek medical advice immediately.

“MISE EN GARDE!”
RISQUE D’EXPLOSION SI LE BLOC-PILES N’EST PAS REMPLACÉ PAR LE MÊME TYPE QUE SPÉCIFIÉ PAR LE FABRICANT. 

Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction.

Region Address Telephone
Asia 4F and 4F.-4, No. 186, Jian 1st Rd., Zhonghe Dist., New Taipei City 235
, Taiwan (R.O.C.) +886 2 8227 1999
Europe Havneholmen 8, 1st Floor, DK-2450 Copenhagen SV, Denmark +45 702 500

75
USA| Steel Series ApS., 656 W Randolph St., Suite 3E, Chicago, IL 60661, USA| +1 312 258 9467

More information and support from steelseries.com.

Complies with IMDA Standards DA 106032

Singapore approval (IMDA)

Malaysia Approval (SIRIM)

Custom Union Compliance.
(Russia / Belarus / Kazakhstan / Armenia / Kyrgyzstan)

ACMA Compliance
(Australia/ New Zealand)

Direct Current

Product Name
Model No
Rated
Wireless Headset
HS26
5V 500mA

Accessories information
Product Name
Model No
Rated
Transceiver
HS26TX
5V 50mA
Operating Temperature: 0 to + 40 °C

learn more at
steelseries.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals