dyson 400714-01 Airwrap Nickel or Copper Multi Styler User Manual

Dyson 400714-01 Airwrap Nickel or Copper Multi Styler

In the box

• Some attachments may not be included.
• You can buy additional attachments at www.dyson.com/mynewairwrap

introduction

1. Temperature control 2 heat settings plus a cold setting to finish your style.
   The temperature control button is located on the back, right hand side of the handle.

2. Airflow control 3 airflow speeds.
   The airflow control button is located on the back, left hand side of the handle.

3. Power on/off with cold shot Sliding switch with cold shot to set your style.
   The power button is located in the middle of the handle. It is a slider button that pushes upwards and downwards.

4. Removable filter cage Easy to remove for cleaning (see the ‘Regular filter maintenance’ section for details).
   The filter cage is located at the bottom of the handle.

LED

• Clean the filter. See the ‘Regular filter maintenance’ section for details.
• If the red LED lights, and the filter has already been cleaned, contact the Dyson Helpline.
• The LED lights are loacated at the bottom of the handle above the filter cage.

Using your attachments

• Connecting the attachment
  Turn attachment into the main body until it fits securely.

• Changing attachments
  To change attachment, pull down on the switch to release.

• Cool touch tip
  During use, the Airwrap™ barrels, Round volumizing brush and Coanda smoothing dryer will get hot. To change to another attachment, hold the tip.

Take care when handling hot attachmentsHold the attachment only in the area indicated.
Some attachments may need occasional cleaning.
For more information, go to www.dyson.com/mynewairwrap

Pre-styling

Coanda smoothing dryer Before curling, pre-dry the hair until almost dry.
Comes with two modes (i) drying (ii) smoothing. Use the cool tip to switch between the two modes.

Curling
Barrels

1. Step
   Take a section of hair and bring barrel towards tips. Hair will start to wrap around barrel.

2. Step
   Move styler towards head, no need to twist. Hold for 15 seconds or until dry.

3. Step
   Press cold shot for 5-10 seconds to set curl. Switch off to release.
   To change curl direction, rotate the cool tip.

Shaping

Smoothing brushes

1. Step
   Rough-dry hair with Coanda smoothing dryer.

2. Step
   Use a Smoothing brush to brush from root to tip.
   Tips
   For volume, face bristles outwards.
   Turn brush inwards at the ends to create a shape.
   Smoothing
   Coanda smoothing dryer Rotate cool tip to select Smoothing mode.
   Press against hair to switch airflow direction.

3. Step
   Use on dry hair to hide flyaways.
   Position against hair until it attracts then slowly run down to tips.
   For use on dry and straight hair.

How to use the contact bar

Position the contact bar against the head until you hear a click and hair attracts.
Run from root to tip to hide flyaways.

Regular filter maintenance

The filter must be cleaned when the white LED starts flashing.
Ensure that you unplug your appliance from the main electricity supply and allow to cool down before cleaning your filter.
The Dyson Airwrap™ multi-styler has highly tuned technology to give outstanding performance.
This technology needs to be kept free from dust and hair product residue. Maintenance is required to maintain performance.

1. Step
   Slide the filter cleaning brush over the cable and onto the filter cage.
   Using a rotating action, clean the filter cage thoroughly.
   Remove the filter cleaning brush.

2. Step
   Hold the handle of your appliance and pull the filter cage downwards, onto the cable.
   Gently pull open the filter cage and slide it off the cable.

3. Step
   Wash the filter cage under a warm, running tap.

4. Step
   Shake the filter cage to remove the majority of the excess water, then leave to dry naturally.

5. Step
   Using a rotating and up and down action, clean the filter mesh with the filter cleaning brush until all the debris has been removed
   Do not use water or chemicals to clean the filter mesh.

6. Step
   Gently pull the filter cage open and slide it onto the cable.
   Slide the filter cage towards the handle and twist until it snaps into place.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>