WeChip W2Pro Backlit Mini Wireless Keyboard Voice Remote Control User Manual

W2Pro Backlit Mini Wireless Keyboard Voice Remote Control
User Manual

Picture Image

: Switch to the red character function and the Fn indicator lights up; Press again to switch back to the default function, and the Fn indicator goes out.
: Quickly enter www.and.com characters

Pairing method

The remote control and USB receiver are already paired at the factory, so the receiver can be used directly after plugging it in If the remote control and the receiver cannot be paired due to misoperation or other reasons during use, you can connect by the following methods:

Start pairing| After inserting the receiver, put the remote control to receiving under 1 °cat then press and hold the [VOLi]and [VOL]  buttons for about 3 seconds at the same time, the blue indicator is always on, which indicates entering the pairing mode.
---|---
Pairing success| After a few seconds. the blue indicator flashes three times and goes off, indicating that the pairing was successful.
Pairing failed| The pairing cannot be successful within 30 seconds, the blue indicator light goes out and the pairing mode is exited.

Infrared Function and Machine Learning

Principle: when the air mouse remote control is not connected to the USB receiver, the front buttons are infrared (except for [Air mouse) [Voice] [Light] button). It is 2. 4G transmission once the remote control connection with the USB receiver. [Power] button keeps the infrared signal sending. a.Press and hold the [OK] + [Power] button at the same time for around 3 seconds, the indicator light will change from dim to bright, then release both buttons. b. Press the button need to ‘learn’, the indicator light flashes, waiting for the machine learning signal; c. Place the original remote control and the air mouse on the desk, head to head (the distance between them is about 10cm). Press the button you want to leam for about 3 seconds; after the learning is successful, the indicator light flashes 3 times and will stay on. Repeat steps b-c continuously for the multiple buttons learning process. d. Press the [Air Mouse] button to exit the learning mode and save the learning data.

Turn-over prohibition

For prevention of mistakenly pressing the button, only face-up buttons are function, and face-down buttons’ functions are disabled.

Sleep and Wake Up Feature

The remote control goes into sleep mode after 15 seconds of standby without use. The blue indicator light goes off. Press any button to wake up the remote control.

Cursor Locking Function

Press the [Air mouse] button to turn on the air mouse function, and the blue indicator light will stay on. Under the air mouse mode, the cursor moves in the same direction as the remote control. [Confirm] button will be the left click for the air mouse. Press the [Air Mouse] button to turn on/off the function of the air mouse, the blue indicator light will go off once the control tum off.

CPI Adjustment

CPI (Count Per Inch). Speed of the Mouse Cursor Adjustment (4 Levels), 1, 2, 3, 4 Level. The higher the level, the faster the speed. The default speed is set at level 2.
1, Speed Increase:
Press and hold the [OK] button + [Volume+] button together for 3 seconds, once the blue indicator flashes twice, release both buttons, and CPI will increase one level.
2, Speed Decrease:
Press and hold the [OK] button + [Volume-] button together for 3 seconds, once the blue indicator flashes twice, release both buttons, and CPI will decrease one level.

Anti-lost function

When you cannot find the remote control, you can press the button on the receiver and the remote will make a beep sound for one minute, so that you can find the remote easily.

Please pay attention when you using the anti-lost function
1. The USB receiver must plug into a power-on device (such as a PC/TV).
2. If no response from the remote control, the distance might exceed over 10 meters signal range or the remote control run out of power.

Touchpad function

Controlled by gestures on the touchpad

Indicator light description

Receiver
offline status| Blue light Flashes slowly
Receiver
connection status| Press button once| Blue light flashes once
Press and hold the button| Blue light flashes once
The Air mouse function is on| Blue light is always on
Pair mode| Enter the pairing mode| Blue light is always on
Pair successfully| The blue indicator flashes 3 times and then goes out
Battery reminder| Charging Status| The red indicator is always on
Fully charged status| The red indicator is off
Low battery status| The Blue indicator flashes for 3 seconds when pressing any button

Reset to Factory Settings

Press [OK] + [Left] together until the indicator flashes, then release the button.

Charging Cable

__

Specifications

wireless modulation method: GFSK
Modulation frequency:2.4-2.4835GHz
Working temperature:-20°C ∼ 65°C
Battery type:550mAh/3.7V lithium battery
Machine power consumption:63mA
Standby power consumption:58uA
Number of buttons:61 keys
Remote control distance:8 ∼10meters
Charging port: Micro USB
Dimensions:192.2 x 53.2 x 16.8MM
Product net weight:162.9±5g
Support system: Android1WindowsIMac 0S1Linux

Note

• This product uses a built-in lithium battery and the input voltage is 5V when charging.
• If the remote control is not used for a long time or the battery is low, please fully charge it before using it.
• Use the specified USB cable to charge the remote control, overcharging will shorten the battery life.
• Avoid use in hot or cold environments, which will shorten the battery life.
• Keep this product away from liquids, such as water.
• Pictures for reference only, the actual product shall govern.

Package contains

1. Remote control x 1
2. USB Receivers 1
3. USB charging cable x 1
4. Instruction Manual x 1

THANKS FOR READING

Documents / Resources

| WeChip W2Pro Backlit Mini Wireless Keyboard Voice Remote Control [pdf] User Manual
W2Pro, Backlit Mini Wireless Keyboard Voice Remote Control, Mini Wireless Keyboard, Wireless Keyboard, Voice Remote Control, W2Pro, Remote Control
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>