WeChip HCY57B Air Mouse User Manual
- June 10, 2024
- Wechip
Table of Contents
WeChip HCY57B Air Mouse
Picture Image
Fn:switch to the blue character function, the indicator light on, then press
once to switch back to the default function, the Indicator goes off.
WWW./COM quick input WWW.andCOM
characters.
Pairng Method
Air mouse and receiver has been paired , so the receiver can be inserted after the automatic connection of the air mouse, in the course of misuse or other causes of air mouse and receiver can not connect the normal communication can be connected through the following methods:Matching operation is as follows:
Start pairing| After inserting the receiver, close the air mouse near
the receiver (within 10CM), then press and hold the [Volume +] button and the
[Volume -] button for about 3 seconds. The blue light flashes three times, it
means into the pairing mode.
---|---
Pairing Success| After a few seconds of pairing, the blue light flashes
three times to indicate that the pairing is successful
Pairing Failure| After the 30 seconds, the blue light flashes three
times and goes out,it means exits the pairing mode.
IR learning Function:
When the remote control is not connected to the USB Dongle, the infrared
learning function can only be used normally if the front bunion is an infrared
function; When connected to USB
Dongle, it has 2.4G function and can not operate infrared function; The
[Power] key and the keys atier learning always send infrared key values
a: Take the power key as an example to illustrate the learning method.
Long press the power key, and the indicator will flash three times first, then
enter the slow flashing state;
b. Use the transmission window of the learned remote controller to aim at
the transmission window of this remote controller for 1-5cm distance learning,
press the power button of the learned remote control once, and artier the
learning is successful, the indicator will flash for three times, then the
code value will be automatically saved and the infrared learning mode will
exit;
c. If you want to learn other keys, just follow steps a-b;
d. At the same time, hold [OK]+[Leta] for about 5 seconds, and the
indicator flashes 3 times, indicating that the learned infrared code value is
cleared.
Note: Artier connecting the USB Dongle, it is found that some keys have no function, and then use this to learn these keys.
Prohibit flip function
In order to prevent the wrong operation of the key, the air mouse in normal use only allows the function of the button on the side, the next button function to prohibit the output.
Air Mouse function:
Click the [Empty Mouse] key to open the empty mouse function, and the blue flashes once. In the empty mouse state, the mouse will move in the same direction as the remote control moves. At this time, the [OK] button changes to the leti mouse button function. Click the [Empty Mouse] key again to turn off the empty mouse function.
CPI adjustment
CPI (mouse pointer movement speed) default second file (CPI is divided into four files, respectively, 1,2,3,4 file), the greater the value of the stall the faster the speed of the mouse.
Increases the speed of the air mouse: press and hold the [OK] key + [volume +] key for about 3 seconds, the work indicator flashes twice and then releases the CPI on the original basis increase of 1 file.
The mouse speed slow down: hold down the [OK] key + [volume -] key for about 3 seconds, the work indicator flashes twice after the release, CPI on the basis of the original reduction of 1 file.
Auto sleep and wake up feature
- When the remote control for 15 seconds without any operation, the remote control into sleep mode, blue light is off.
- After the remote control entering hibernation , press any key to wake up the remote control to enter the normal working condition.
Charging line instructions
Led Indicator instructions
Project | Indicator led status |
---|---|
Separate status with USB receiver | Blue light flashing slowly |
Connection status with USB receiver
| Click Button| Blue light flashes once
Press Button long time| Blue light normally on
Open the air mouse| Blue light flashes once
Pairing
| Enter pairing mode| Blue light normally on
Pairing successed| Blue light flashing 3 times quickly
Power indication| Charging| Charging :Red light normally on
Full of charging: red light off
Low power| Press any buttons, the blue light flashes 3 seconds quickly.
Specifications
Wireless modulation mode :GFSK
Modulation frequency :2.4-2.4835GHZ
Working temperature :-20℃~65℃
Battery type : 300mah ,3.7 V lithium battery
Overall power consumption : less than 9mA
Standby power consumption: less than 25uA
Key number : 57keys
Remote control distance : >10 meters
Charging port: micro USB
Size : 1585516.5MM
Weight: About 86.5g±5g
Support system: Windows\Android\Mac OS\Linux
Notice
- This product uses built-in lithium battery, charging input voltage of 5V.
- If the remote control is not used for a long time or when the battery is low, please use it when it is fully charged.
- Use the specified USB cable to charge the remote control, overcharge the battery will shorten the battery life.
- Avoid use in hot or cold environments, which will shorten battery life.
Package contents
- Air Mouse
- USB Receive
- USB charging cable
- User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>