frogblue E-Mail-Accounts in Display User Manual
- June 5, 2024
- frogblue
Table of Contents
SMART BUILDING TECHNOLOGY GERMANY
Setup of an e-mail account in the display
The following steps explain how to set up your email account in the frog display.
Step 1:
Activate the SMTP server and enter your e-mail, user name, and password.
The data for your SMTP servers (outgoing mail) – such as hostname or port –
can be found at your respective provider.
Encryption via TLS/SSL is recommended.
Step 2 :
After completing all entries, you can send a test mail to check whether your
account details have been entered correctly. This mail will then be sent to
the registered mailbox.
Depending on the email provider, separate verification may be required (two-
factor authentication).
Example: the Gmail SMTP server
praxistipps.chip.de wrote on 12.08.2016:
“If you receive your mails via POP3, use the address “pop.googlemail.com”
(port 995) as an incoming mail server. For outgoing mail use
“smtp.googlemail.com” (port 465 or 587). For reception via IMAP, use the
address “imap.gmail.com” (port 993). The outgoing mail server also changes to
“smtp.gmail.com” (port 465 or 587).
Note: For the incoming mail, select the standard SSL as encryption.”
(Aschermann, T., 12.08.2016, Gmail: Set up an incoming mail server and
outgoing mail server, https://praxistipps.chip.de/gmail-posteingangsserver-
undpostausgangsserver-einrichten_49178, retrieved 14.02.2022)
Einrichtung-E-Mail-Account
16. Februar 2022 •
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>