HONEY JOY TOPB003902 6 ft. x 8 ft. x 7 ft. Walk In Metal Green Greenhouse Portable Pop Up Garden Instruction Manual
- June 5, 2024
- HONEY JOY
Table of Contents
Assembly Instruction.
Attention: Pls read it carefully before assembling it.
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily
once assembled. Always place the product on a flat, steady, and stable
surface.
Keep all small parts and packaging materials for this product away from babies
and children as they potentially pose a serious choking hazard
Replacement
| Part | Description |
|---|---|
| A | Peak Cap |
| B | Ceiling Assembly |
| C | Top Cap |
| D | Eave Assembly |
| E | Leg Assembly |
| F | Fabric Top |
| G | Stake |
| H | Guy Rope |
IMPORTANT:
Carefully read and follow the instructions provided with this product.
WARNING: Keep all flame and heat sources away from this canopy top and
sidewall fabric. This canopy top and sidewall are made with flame-resistant
fabric which meets the CPAI-84 specification. It is NOT FIRE PROOF. The fabric
will burn if left in continuous contact with any flame source. The application
of any foreign substance to this fabric may render the flame-resistant
properties ineffective.
WARNING: Do not set up or leave the canopy unattended in the following
conditions: gusty wind, rain, hail, sleet, snow, drizzle, or any other harsh
weather conditions. Doing so may cause damage to the entire canopy and will
void the warranty
Set Up The Canopy
- Stand on the opposite side of your partner and lift the frame off of the ground while walking backward away from your partner.
- Unfold the canopy top and place the top over the opened frame. Secure the canopy top to the corners of the canopy frame using the Velcro connections.
- Lift up the slider at each corner of the canopy frame until it clicks into the spring button. Finish attaching the large canopy inside the canopy frame using the Velcro loops.
- Pull the snap button on each leg, and raise or lower to adjust the canopy height.
- Insert a stake into the foot of each canopy leg.
Measure out each leg to a proper distance and secure four stakes to the ground. Attach the ropes to the canopy top and tie the attached ropes to the stakes on the ground.
Ensure the ropes have the proper
tension by adjusting the plastic adjusters on the ropes.
Take Down The Canopy
Pull up all stakes from the ground. Press the snap button on each leg and
retract the legs to their original height.
Press the snap button at each corner of the canopy, and pull down the slider.
Lift one leg of the frame until the two neighboring legs are raised off the
ground. Push inward until the frame is fully closed.