Kamon 5 Pack Earbuds Headphones with Remote & Mic, Earphones User Instructions

Kamon 5 Pack Earbuds Headphones with Remote & Mic, Earphones

Specifications

• BRAND : Kamon
  MODEL NUMBER : K-E8
  COLOR : #2
  NOISE CONTROL : Sound Isolation

• CONNECTIVITY TECHNOLOGY : Wired

• COMPATIBILITY: iPhone devices, androids smartphones, iPod, iPad, MP3 players, music speaker|

• IMPEDANCE: 32ohm±15% at 1KHz

• POWER RATING: 3mW

• MAXIMUM INPUT POWER: 5mW

• DISTORTION: 3% Maximum (1KHz/1mW)

• FREQUENCY: 20~20,000Hz

• BUZZED & RATTLE: 50~3KHz (0.22V)

• CORD LENGTH: 120cm

• PLUG: 3.5mm jack

• WEIGHT: 11g

Introduction

The inbuilt multi-function button on the earbuds makes it easier to answer/end calls, play/pause music, switch tracks, and more. Free your hands and converse on the phone whenever and anywhere you want! A perfect fit and added comfort are guaranteed by the ergonomic in-ear design, which remains in for a solid fit every time. It is Designed with strong sound-insulating material, which minimizes sound leakage while reducing external noise, you get clear sound. For music you can feel, earbud headphones deliver a clear, top-notch studio- quality performance with a powerful bass, a tight midrange, and a precision treble response.

It is Ideal for iPod, iPhone, iPad, MP3 players, Android cellphones, music speakers, and the majority of other interface devices having a 3.5mm headphone connector. Since earbuds are made of a highly durable cable, you can store them in your pocket or other locations without worrying about them tangling. Additionally, the outer layer of protection can shield your earbuds from damage when they are exposed to external shocks, giving you a stress-free and enjoyable experience.

HOW IT WORKS

To use your headphones as a mic, plug your headphones into the mic input of the mixer. Make sure the mic levels are turned all the way down, talk into the mic and bring up the levels as needed. If the mixer/controller has EQ controls turn down the lows to reduce the boominess of your voice and increase the highs.

HOW TO USE

Your device’s volume limit should be set to no louder than 70% of its maximum volume. Don’t pay too much attention. Use the 60/60 rule, which states that you should listen at 60 percent volume for 60 minutes before taking a break for at least 30 minutes to give your hearing a break.

HOW TO CHARGE

Close the charging case’s cover after putting the earbuds inside. The battery LED within the charging case is red, yellow, or green when the lid is open to show the earbuds’ current battery state. The earphones need about two hours to fully recharge.

HOW TO KNOW IF EARPHONE HAS MIC

The audio on the receiving end isn’t the best because they’re the furthest from the mouth. On headphones, there is typically a mark to identify an internal microphone. The majority of the time, there’s a tiny hole on the bottom of the ear cups (this may or may not have a microphone symbol next to it).

HOW TO CONNECT TO ANDROID

• From the top of the screen, swipe downward.
• Touch Bluetooth and hold it.
• To pair a new device, tap. If Pair new device isn’t there, go under “Available devices” or hit More. Refresh.
• Select the Bluetooth device you want to associate with your device by tapping its name.
• Observe any directions displayed on the screen.

HOW TO CLEAN EARBUDS MIC

To clean the surface and crevices, use a cleaning solution or a cotton swab dipped in an alcohol or hydrogen peroxide solution. Even better, you can clean them with a fresh cloth immersed in warm, soapy water.

Frequently Asked Questions

How does the wireless earbud microphone function?

There are two types of wireless earbuds: genuine wireless and wireless. There is no connection connecting the wireless earphones to the smartphone; instead, a wire links each earbud to the next. The majority of them have call and volume controls, and a microphone—known as an in-line mic—is mounted close to them.

How do wireless earbuds operate?

Wireless audio sources provide signals to their linked audio sources, which wireless headphones receive. The source device encodes these signals, which are then sent across radio frequencies or less frequently over infrared carriers. The RF or IR signal is received by the headphones, which decode it into audio.

Have all earbuds got a microphone?

Even while not all earbuds include microphones, those that do usually employ one of these two well-liked technologies: Electret Condenser Microphones (ECM) Micro-Electro-Mechanical System (MEMS).

Why won’t my headphones or microphone work?

Make sure your device’s mute button is not active. Verify that your computer and microphone are properly connected by checking your headset or microphone. Make sure the default recording device on your computer is set to your microphone or headset.

Can you communicate using wireless earbuds?

These earbuds provide crystal-clear hands-free calling and come with a built- in microphone, high-definition sound, and rapid Bluetooth connectivity. Additionally, they have magnetic clips that hold them together so you may wear them comfortably even when you’re not speaking or listening.

How far can you go with wireless earbuds?

The Bluetooth® connection’s range is roughly 30 feet (10 meters). However, depending on obstructions (people, metal, walls, etc.) or the electromagnetic environment, the maximum communication range may vary. NOTICE: Not every audio equipment comes with Bluetooth functionality.

What does the earbud button do?

If the headset has buttons for volume control: Each time the volume-up button is used, the volume should rise incrementally until the maximum volume is reached. The volume should rise gradually to its highest level if the volume- up button is pressed and held.

Can you make calls while wearing earbuds?

There is a huge market for Bluetooth and wired earphones that can be used with any smartphone or tablet, even though audio headphones may still not have the ability to answer calls. Making and receiving calls is a part of this.

How can I tell when my earbuds have finished charging?

Bluetooth headsets all function differently. However, once your headsets have reached full charge, the earbuds usually start to glow. Red and green lights are most frequently used in headsets. A low battery level is indicated by the red light, while a full charge is indicated by the green light.

Can earphones be charged without a case?

TWS headsets are available that may be charged without a case. However, they also offer a capability that allows the device to be charged or connected to a USB input through a special connection. For instance, the bundled double cord is utilized with the I7 TWS model.

Videos

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>