Cabletec DVB-T2 HD tuner User Manual
- June 5, 2024
- Cabletec
Table of Contents
Cabletec DVB-T2 HD tuner
PRODUCT DESCRIPTION
- Power button
- Previous channel
- Next channel
- Display
- USB port
- Antenna input
- HDMI output
- SCART output
- Power cable
REMOTE
- Power button
- Play/pause button
- Stop
- Next track button
- Previous track button
- Record button
- Subtitles
- Mute button
- Choose audio track
- Red button: PVR
- Green button: picture format
- Blue button: Timer
- Yellow button: picture format
- Menu button
- Exit from menu
- OK button
- Volume / directional buttons
- Channel change / directional buttons
- Program info
- Previous channel
- EPG
- Volume control
- Channel change
- Teletext
- Numbers (0-9): select channel or option
- TV/RADIO: switch between radio and TV channels
- FAV button: favorite channels
Programmable buttons
- A. TV ON/OFF
- B. Source selection
- C. Decrease TV volume
- D. Increase TV volume
- E. SET button
Programming TV control buttons
- Place the tuner remote and the TV remote towards each other, at around 4 cm distance.
- Press and hold the SET button, until the red LED glows stronger.
- On the tuner remote, press one of the programmable buttons (in the TV CONTROL frame).
- Press the corresponding button on the TV remote a couple of times.
- Press the SET button, to exit the pairing mode.
- The function is assigned to the button. If the button does not work, try repeating steps above.
CONNECTING
- To get high resolution, connect the tuner to the TV with an HDMI cable.
- To get standard resolution, connect the tuner to the TV with a SCART cable.
BATTERY INSTALLATION
- Open the battery compartment.
- Place two AA batteries, according to polarity.
- Close the battery compartment cover.
Notes:
- Do not mix old and new batteries.
- If the remote is not going to be used in a long time, store it without batteries inside.
- Protect the remote from direct sunlight and other heat sources.
OPERATION
- To enter the Main menu, press the MENU button.
- To navigate the menu, use the volume and channel buttons. To confirm choices, press the OK button. To exit a menu, press the Exit button.
INITIAL STARTUP
If the device is turned on for the first time (or the factory reset has been performed), the setup screen will be shown on the screen.
- Select language, country and if the antenna is powered.
- Press the Begin button. The tuner will now search for available channels.
MAIN MENU
Program
Channel edit: Allows for blocking, deleting, skipping, changing channel
names, and managing the favorite channels list. To preview the selected
channel, press the OK button. Press one of the buttons, to go to the channel
edit mode:
- Press the 1 button to enable channel deleting mode. Select channels that you want to delete with the OK button, then press the EXIT button to delete these channels.
- Press the 2 buttons to enable moving channels mode. Select a channel that you want to move with the OK button, then using the up and down button, move the channel to new position. Press the EXIT button to save. Note: in the moving channels mode, the LCN function should be off.
- Press the 3 buttons to enable skip channel mode. Select channels that you want to skip with the OK button. Press the EXIT button to save.
- Press the 4 buttons to enable channel lock mode and input the password (default: 000000). Select channels that you want to block with the OK button. Press the EXIT button to save.
- Press the 5 buttons to enable favorites mode. Select a channel with the OK button, and select the list. Press the EXIT button twice to save.
- Program guide: function also available from the remote. Allows for browsing through TV programs.
- Sort: Select the channel sorting method.
- LCN: Logical Channel Number; sorts the channels by their numbers.
- Volume scope: set the volume for all the channels.
Picture
- Aspect ratio, Resolution, TV format: display settings. Note: default resolution for HDMI is 1080i, for SCART 576i.
- OSD settings: settings for info view for the selected channel.
Search
This menu allows for searching and saving channels. Select mode, country,
antenna power, and FTA option (searching for free channels only).
Time
This menu allows for setting the date and time, sleep timer, and automatic
turn-on/off.
Timer:
- Press the green button to add a new entry to the timer. Set the mode (notification or recording), type, date and time and channel. Press the EXIT button to save.
- Press the red button to delete highlighted timer entry.
- Press the yellow button to edit highlighted timer entry.
- Press the blue button to delete all timer entries.
Option
Settings for language, subtitles and sound.
System
- Parental Control:
- To turn it on, go to the Parental Control menu (the default password is 000000). Set the age from 4 to 18.
- To change the options, go to the Lock control menu (the default password is 000000). Switch the menu lock (edit channel menu will be protected by the password) and channel lock (locked channels will require inputting the password). To change the password, select the Change password option.
- Factory reset: reset all the data and set it to factory settings.
- System information: view information about the system.
- Software upgrade: install new software. Caution: do not unplug the device while the upgrade is in progress.
- Power on control: select the action that the device will take after plugging it to the power.
USB
- Media Center: playing movies, music, and pictures that are on the USB drive.
- Internet: Weather and YouTube apps (optional).
SPECIFICATION
MAIN FEATURES
- LED display
- Fully compliant with DVB-T2/DVB-T/DVB-C
- Automatic/manual scan
- Media playback and PVR by USB 2.0 port
- 7 days EPG
- Timeshift
- PVR schedule recording
- Signal strength and quality display
- LCN (Logical Channel Number)
- Parental control
- Timer
- Teletext
- Favorite channel list
- Optional: Weather, Youtube app
SYSTEM
- CPU: GX6702H5
- Internal memory: 32 Mb
- RAM: 512 MB
- Input impedance: 75 Ohm
- Input frequency range: (VHF) 177,5~226,5 MHz; (UHF) 474~858 MHz Video resolution: 1920 x 1080 px
- Video format: Auto, 16:9, 4:3 LB, 4:3 PS
- Video decoding: MPEG-2, MPEG-4, H.264, H.265
- Supported formats: H.264, HEVC, MP3, MP4, MKV, JPEG, AVI
- Audio decoding: MPEG-1 Layer I/II, MPEG-2 layer I/II, AAC
- File system: FAT16, FAT32, NTFS
INPUT/OUTPUT
- SCART
- HDMI
- USB 2.0
- 1x IEC connector (ANT IN)
POWER SUPPLY
- Input voltage: 100-240 V~; 50/60 Hz
- Remote control: 2x AAA battery
- Power consumption: Max. 7,5 W
- Power consumption in standby mode: Max. 1 W
PHYSICAL PARAMETERS
- Dimensions: 131 x 78 x 30 mm
- Power cord length: 1 m
- Weight: 230 g
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or its literature
indicates that it should not be disposed of with other household wastes at the
end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types
of waste and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.