DS18 PRO-NEO10R 10 Inch Mid-Range Loudspeaker With Neodymium Rings Owner’s Manual
- June 5, 2024
- DS18
Table of Contents
DS18 PRO-NEO10R 10 Inch Mid-Range Loudspeaker With Neodymium Rings
PRO-NEO10R
SPECIFICATIONS
Nominal Diameter ………………………………………………………………………………………………10″
Nominal Impedance ………………………………………………………………………………. 4 Ohms
RMS Power Handling…………………………………………………………………………..500W
MAX Power Handling………………………………………………………………………..1000W
Sensitivity (1w/1m) ……………………………………………………………………………………98 dB
Frequency Response………………………………………………………………..60Hz-11KHz
Recommended Hi Pass Crossover ……………………………………….120Hz
Pair or Single……………………………………………………………………………………………..Single / Unidad
MOTOR
Voice Coil Diameter ………………………………………………………..2.5”/65.5 mm
Voice Coil Former Material …………………………………………………………….Ti
Winding Material ……………………………………………………………………………………….. CCAW
Cone Material……………………………………………………………………………………….. Paper
Dust Cap Material ……………………………………………………………. Paper
Surround Material ……………………………………………………………………….Cloth
Basket Material ………………………………………………………………..Aluminum
Basket Color…………………………………………………………………………………Red
Magnet Material ………………………………………Neodymium Rings
THIELE & SMALL PARAMETERS
Equivalent Volume ……………………………………………..Vas ………………………………. 12.5 L
Excursion (one way) ……………………………………………………Xmax …………………………. 12 mm
Free Air Resonance …………………………………………Fs ………………………………. 102 Hz
Mechanical Factor ………………………………………………………Qms ……………………………..1.158
Electrical Factor …………………………………………………………….Qes………………………………..0.316
Total Factor ……………………………………………………………………….Qts…………………………………0.248
Mechanical Mass ……………………………………………………….Mms …………………………34.815g
Mechanical Compliance………………………………….Cms…………………..0.070 mm/N
BL Factor ………………………………………………………………………………..BL ………………………..15.746 N/A
Voice Coil Inductance ………………………….Le……………………………17.35 mH
Cone Area ………………………………………………………………………….Sd ……………………… 356.33 Cm2
DC Resistance ……………………………………………………………….Re ……………………………3.2 ohms
Mechanical Mass w/ o air……………………………….Mmd…………………………27.214g
MEASUREMENTS
Overall Diameter…………………………………………………………………………………..10.3” / 261mm
Overall Depth …………………………………………………………………………………..4.8” / 121.4mm
Front Mount Baffle Cutout………………………………………………… 9” / 229mm
Mounting Depth ………………………………………………………………………..4.3” / 109mm
Motor Diameter ……………………………………………………………………………….5.5″ / 140mm