PETTADORE FS030 Hydrate Upgrade Warmer User Manual

PETTADORE FS030 Hydrate Upgrade Warmer

Notice

1.  Please read the manual carefully before use.
2.  Children must use the unit under the guidance of an adult.
3.  Do not look directly at or touch the UVC lamp while the device is sterilizing.
4.  When cleaning the fountain or the tank, please disconnect the power supply and take the warmer out.
5.  After some period of use, scale deposits may appear on the warming bar, this is normal.
6.  The warmer doesn’t warm the water over 28°C.
7.  As UVC ultraviolet light cannot penetrate plastic or clothing, the visible light source that is exposed by the UV tube does not inflict damage.
8.  After a long period of use, yellowing inside the fountain is normal.

Meet your Hydrate Upgrade

Operations

1.  Lift the reservoir lid and put the cable in the reserved outlet hole. Put the lid back and slide the controller over the edge of the tank.
2.  Connect the power cord to the adapter.

Specifications

• Model: FS030
• Power Input: DC 12V 2A
• Weight: 105g
• Sterilization Media: UVC
• Size: 99x35x28mm
• Warming: up to 28C°
• Applicable Fountain: FSL020 / FSW030
• Contents: 1x Warming & Sterlizing Unit, 1x 12V 2A Power Adapter

References

• Pettadore | Intelligent Petcare
• Pettadore Manuals

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>