PETTADORE AOE010 Air Eliminator Odour Remover User Manual
- June 5, 2024
- PETTADORE
Table of Contents
AOE010 Air Eliminator Odour Remover
User Manual
In the box
Smart Odor Eliminator
Foam Sticker Micro USB Cable Metal Plate Sticker
Meet your Air Eliminator
How it works:
The Built-in ozone generator converts 02 in the air to M. O which has active
oxidizing properties, which can, at the source in the cat toilet, decompose
the odor molecules and re-convert it into harmless. It can also destroy the
cell membrane structure of bacteria and has a certain sterilization effect.
Operations:
-
Paste the metal plate onto the foam sticker and attach the sticker to the position you expect.
-
For a closed cat toilet: Stick the foam sticker onto the cat toilet hood; For an open cat toilet: Stick the foam sticker onto the wall near the cat toilet (about 5 cm above the cat toilet); For other scenarios, place the device closer to the odor source.
-
Press firmly onto the metal plate to secure it.
-
The eliminator can be mounted onto the metal plate.
-
Select the working mode: Switch from OFF to your desired mode.
-
Charging: Remove the eliminator and connect the power supply for charging which takes about 3 hours.
Specification:
Model: A0E010
Size: 99.6×51.7×41.5mm (3.92×2.04×1.63 inches)
Weight: 153 g (5.4 oz)
Battery: Lithium 2200 mAh
Working modes: Triggered by timing or
Infrared Detection Range : about 1 m or 3.3 ft
Precautions:
- This product is not waterproof, NEVER wash directly into the water
- DO NOT replace the battery or disassemble it yourself;
- DO NOT block the air outlet and keep proper ventilation;
- If kids are using the product, be sure the guidance of an adult is present;
- Mode I is recommended to use ONLY in an environment where no human or pet is present.
Warranty Terms
Within the period of warranty, if the product fails with no fault of user
operations, it will be repaired at Pettadore their expense. Product failure in
the examples below will not be covered by the warranty:
- Intentional damage to product by the user or third party
- Failure to operate or maintain the product in accordance with the Quick Installation Guide (QIG) instructions
- Failure by natural wear and tear including but not limited to scratching, corrosion, oxidation, and rusting.
- Failure by non-authorized repair of the product including but not limited to users’ own or third-party repairing attempts or modifications.
For other languages see
pettadore.com/pages/manuals
Pettadore (Achievd B.V.) Vasteland 78 unit A2.14 3011 BN Rotterdam The
Netherlands