Lenco DVD-120 DVD CD USB Player User Manual
- June 5, 2024
- Lenco
Table of Contents
Lenco DVD-120 DVD CD
USB Player
Model: DVD-120
CAUTION:
-
Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.
-
Install in accordance with the supplied user manual.
-
Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.
-
Avoid using the device near strong magnetic fields.
-
Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.
-
Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.
-
Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
-
The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.
-
Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.
-
Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
-
This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
-
Keep away from animals. Some animals enjoy biting on power cords.
-
To clean the device, use a soft dry cloth. Do not use solvents or petrol-based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.
-
. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
-
Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.
-
If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use a USB extension cable because it can cause interference resulting in failing of data.
-
The rating label has been marked on the bottom or back panel of the device.
-
This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.
-
. This product is intended for nonprofessional use only and not for commercial or industrial use.
-
Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.
-
Never remove the casing of this device.
-
Never place this device on other electrical equipment.
-
Do not allow children access to plastic bags
-
Only use attachments/accessories specified by the manufacturer.
-
. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when the liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.
-
If the product is delivered with a power cable or AC power adaptor:
• If any trouble occurs, disconnect the AC power cord and refer servicing to qualified personnel.
• Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
• Unplug this device during lightning storms or when unused for a long period.
• The socket outlet must be installed near the equipment and must be easily accessible.
• Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
• Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
• Devices with class 2 construction do not require an earthed connection.
• Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
• Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock. -
If the product contains or is delivered with a remote control containing coin/cell batteries:
Warning:
• “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
• [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. -
Caution about the use of Batteries:
• Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
• Battery cannot be subjected to high or low extreme temperatures, or low air pressure at high altitude during use, storage or transportation.
• Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
• A battery is subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
• Attention should be drawn to the environmental aspects of battery disposal.
INSTALLATION
- Unpack all parts and remove protective material.
- Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.
WARNING
Class 1 Laser Product
CLASS 1 LASER PRODUCT APPAREIL A LASER DE CLASSE 1 PRODUCTO LASER DE CLASE 1|
CAUTION
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO
BEAM| ****
---|---|---
This product contains a low-power laser device.
Warning: Do not touch the lens.
CAUTION:
Usage of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Content
|
---|---
Remote control| User manual
AV cable
Description of the product
Front panel
1. DVD door
2. Remote receiver
3. Display
4. USB Port
5. Open/Close button| 6. Play/Pause button
7. PREV button
8. Next button
9. Standby button
---|---
Rear panel
1. Scart output
2. HDMI output
3. Audio right out| 4. Audio left output
5. Video output
---|---
Remote control description
Battery compartment
Requires 2 x AAA batteries.
Connecting Video & Audio
Connecting Video and Audio
Note: Before making or changing any connections, make sure that all the
devices are disconnected from the power outlet.
HDMI Output
Requires an HDMI cable (not included)
- Use the HDMI Output to send audio & video from the DVD player to a television.
- Use an HDMI cable to connect the HDMI Output on the rear of the DVD player to an HDMI input on your television.
- Adjust the input of the connected television setting to match the input used in the previous step.
Remark: The HDMI connector is only for the transmission of the Audio Video signal to an external screen!
RCA Stereo Audio Output
- Use the RCA Stereo Audio Output to send audio from the DVD player to a television or audio system.
- Requires an RCA audio cable.
- Use an RCA audio cable to connect the RCA Stereo Audio Output to an RCA stereo audio input on your television or audio system.
- Adjust the connected television or audio systems input setting to match the input used in the previous step.
SCART Output
- Use the SCART Output to send audio/video from the DVD player to a television.
- Require a SCART cable (not included).
- Use the SCART cable to connect the SCART output in the DVD to a SCART input on a television.
- Adjust the connected television’s input setting to match the input used in the previous step.
LOADING A DVD OR CD
Loading a Disc
- Press the Open button to open the Disc Door.
- Load a disc into the DVD player tray, DVD label side facing up.
- Close the Disc Door. After a disc is loaded, it will begin playing automatically.
Playing a Loaded Disc
- Follow the instructions for loading a Disc.
- If the disc does not begin playing automatically, press the Play/Pause button.
Programming a Loaded Disc
- Follow the instructions for Loading a Disc and Playing a Loaded Disc.
- While the loaded disc is playing, press the Program button on the remote.
- Use the Number Keypad to enter in the titles and chapters in the order you want to view them. DVD Titles and chapters or CD tracks will play in the order they are programmed.
- Repeat step 3 until the desired DVD titles and chapters or CD tracks are programmed.
USB PORT
Connecting a USB stick
Connect a USB stick to the USB Port.
Accessing the Content on a USB Drive
- Press the DVD/USB button to enter DVD/USB mode.
- The DVD player will index your USB stick and display potential compatible files to playback3. Use the Up/Down arrow on the remote to highlight your file and press OK to playback
Technical Specification
Signal system: PAL/AUTO/NTSC
Laser: Semiconductor laser, wavelength 650nm
Frequency Response: 20Hz-20KHz (at 1KHz 0 dB)
Signal-to Noisy Ratio (Audio): >= 90 dB (at 1KHz 0 dB)
Audio Distortion + Noise: <= – 60dB (at 1KHz 0 dB)
Audio Output (Analog audio): 2.0 ±1.0 Vrms
Video Output: Composite: 1.0 +/- 0.2Vp-p
Load impedance: 75 ohms, imbalance, negative polarity
Power Supply: 100-240V, 50/60Hz
Product dimension: 225 x 228 x 53mm (WxDxH)
Product Weight: 980 gr.
Troubleshooting
No power/no display on the front of DVD player once powered on:
– Always use the power button on the front of your DVD player to power it ON.
The Standby button on the remote
control will only work when the power button on the front of the DVD player
has been switched to ON.
– Check to ensure that the mains power plug is connected to the mains outlet
and that the mains outlet is switched on.
No video display on TV once the DVD player is powered on:
– Check that your A/V, Scart or HDMI cables are connected fully on both the
DVD player and TV end.
– Check that your TV has been turned to the correct input channel. Usually,
TVs have a remote control button titled
something similar to INPUT or SOURCE to change between input connections
available. Your TV must be turned to the correct input channel for it to show
the video from the DVD player.
Distorted video or black & white video only:
– If using Scart cable check that the Scart plug is fully pushed into the
socket on both the DVD player and the TV.
– Clean your DVD disc to remove fingerprints, dust, etc.
Unable to play DVD disc or playback stops:
– If the DVD player has been recently delivered or has not been used for some
time leave the player powered on for 1-2 hours to clear any potential
condensation that may have gathered inside the machine on the laser lens. This
is a common problem after transportation or when a unit has been in storage
but will clear when the player internals have
fully warmed up.
– Check that your DVD disc is the correct way up in the DVD player tray. The
printed surface of the DVD should be facing upwards in the DVD tray.
– Clean your DVD disc to remove fingerprints, dust etc.
The remote control does not work:
– Always ensure there is a clear line of sight between the player and remote
control. Cupboard doors, plant vases, etc placed between player and remote
control can stop the remote control signal from reaching the player.
– Change the remote control batteries. Always test a remote control with a
brand new set of good-quality batteries. Do not mix old and new batteries.
– Check to make sure the batteries in the remote control are the correct way
around.
– Try the remote control closer to the DVD player
Service and support
Guarantee
Lenco offers service and warranty in accordance to European law, which means
that in case of repairs (both during and after the warranty period) you should
contact your local dealer.
Important note: It is not possible to send products that need repairs to
Lenco directly.
Important note: If this unit is opened or accessed by a non-official
service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use,
all warranty obligations of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore
some of the instructions, specifications, and pictures in this documentation
may differ slightly from your particular situation. All items described in
this guide for illustration purposes only and may not apply to a particular
situation. No legal rights or entitlements may be obtained from the
description made in this manual.
Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery
should not be disposed of as general household waste in Europe. To ensure the
correct waste treatment of the product and battery, please dispose of them in
accordance with any applicable local laws of requirements for the disposal of
electrical equipment or batteries. In so doing, you will help to conserve
natural resources and improve standards of environmental protection in the
treatment and disposal of electrical waste (Waste Electrical and Electronic
Equipment Directive).
CE Marking
Hereby, Commaxx B.V. Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands,
declares that this product is in compliance with the essential EU directive
requirements. The declaration of conformity may be consulted via
techdoc@commaxxgroup.com
Service
For more information and helpdesk support, please visit
www.lenco.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>