Ecollar PE-900 Pro Educator Owner’s Manual

PE-900 Pro Educator
Owner’s Manual

Pro Educator PE-900
Owner’s Manual
E-Collar Technologies, Inc.

Welcome to the World of
E-Collar Training
Congratulations on your purchase of this E-Collar Pro Educator training system. We are confident that your e-collar training system will exceed your expectations.
We have taken great care to provide ample safety features to assure a pleas­ ant experience for you and your dog.
Finding the best-suited training method with a loving heart is essential for you and your dog. Soft leash pressure and low stimulation combined with consistent training techniques are more effective. The use of the training system should be part of an overall training program. Be cautious using high levels of stimulation should only be used as a last resort and in life- threatening situations.
We recommend that you are able to employ the features and functions of your E-Collar Pro Educator to their fullest by familiarizing yourself with the safety instructions in the owner’s manual before first use. To access more advanced features of your E-Collar Pro Educator system; please refer to online resources and to our customer service. Consult our friendly and qualified customer service to inquire information on effective and comprehen­ sive low- level training and trainer in your area.
Thank you for choosing E-Collar Pro Educator dog-training system.
This guide will assist you with the basic functions, programming features, and contents of the Pro Educator.
Additional information and help is available on www.ecollar.com and by emailing customerservice@ecollar.com.
Please contact our customer service department, 8 AM to 8 PM E.S.T.,
1-855-326-5527 or 260-357-0051.

Important Notice

Caution
This product is not intended to be used on human beings.
E-Collar Technologies, Inc. is not responsible for any misuse of this product including damages from dog bites and lost items. Seek evalua­ tion by a professional trainer before use for aggressive dogs. It is common for aggressive dogs to associate the stimulation with the handler and take action against the handler. Sometimes dogs put under e-collar pressure during a fight can exhibit redirected aggression and become more aggressive.
At the default setting, the stimulation level is not locked. To prevent giving accidental shock, lock the proper stimulation level for the dog’s safety.
The maximum range of Educator 900 Series may vary according to terrain, weather condition, green area, or telephone pole as well as a radio wave from other radio devices.
E-Collar 900 Series provide connecting with PC. You can change most of the options by using a computer tool which can download at http://ecollar.com.
Vibration type and Tone type are changeable by computer tool only.

PACKAGE CONTENTS

Device Composition

How to Charge Devices

Important Notice: Take off the charger from when the device is fully charged for longer battery life.

Transmitter :
The battery life is displayed on the LCD.

Receiver

• The indicator light is blinking “Green” when the battery level is okay.
• The indicator light is “Amber” when the battery level is below medium.
• The indicator light is “Red” when the battery is very low.
  

HOW TO CONNECT THE CHARGER

Each Unit can be charged separately or together.
The indicator light is red during charging and turns green when it is fully charged.

Turning ON/OFF the PE-900

Turning Receiver ON and OFF
COLLAR RECEIVER turn ON/OFF by using magnet technology

Put a red dot on the rear of the Transmitter close to the red dot on the receiver

Turning Transmitter ON and OFF

Position of Transmitter
To obtain the maximum range hold the transmitter like the torch on the Statue of Liberty Keep the antenna away from your body or fingers at all times, touching the antenna  will greatly reduce the range 

CORRECTLY FITTING COLLAR

The collar should be adjusted to allow the contact points” to have direct contact with the skin. You should be able to fit a couple of fingers between the collar strap and your dog’s skin.
Too tight poses the risk of skin irritation and discomfort. Too loose and the contact points will not be able to administer the stimulation reliably and can cause skin irritation due to chafing. Short hair breeds may need the 3/8 microprobes offered as an accessory item, contact customer service for details. The optimal position for the collar receiver is on either side of the dog’s windpipe. f the factory installed 5/8 contact points are not making good contact due to thick fur, see page 24 for changing contact points.

IMPORTANT NOTICE
To prevent the occurrence of skin irritations the Collar Receiver should never be worn for more than 12 hours per day. Should your dog experience skin irritations from over-exposure to the contact points remove the collar receiver unit immediately and stop using your e-collar until all skin irritations are completely healed. Antibiotic ointment will aid in the healing process. Some dog breeds have extra thick fur or extra short fur that requires special contact points. Please contact our customer service or visit www.ecollar.com for more information

HOW TO CHANGE THE CONTACT POINTS

If “contact points” do not fit for your dog due to long hair, you can easily change the contact point with the contact point tool. Follow diagrams step by step.

LCD DISPLAY Description

duration
C| Continuous Stimulation| Sends stimulation continuously for up to 10 seconds.
C+| Continuous Boost Stimulation| Sends stimulation continuously for up to 10 seconds.
R| 1 Second Ramp Stimulation| Stimulation ramps from 10 to stimulation level
R+| 2 Second Ramp
Boosted Stimulation| Stimulation ramps from 10 to boosted stimulation level
I| Instant Stimulation Mode| Gives Continuous Stimulation for up to 45 seconds followed by Volume Dial must be O to  activate
V| Vibration| Vibrate up to 30 seconds
T| Tone| Flat sound up to 30 seconds
| Boost Level Setting| Set up Boost Level. Default is 5
| Night Tracking Light| Turn ON/OFF Night Tracking Receiver Light
| Lost Transmitter| 6 Hours Timer for Transmitter
| Pairing Collar Receivers| Replace/ Add Receivers
1 2 3| Multi Dog System Indicator| Display the current Dog system
| Stimulation Level Indication| 0 to 100 Stimulation Level
| Battery Indicator| Indicates Transmitter Battery Level

Default Button Preset & Usage

Important Notice: Four default stimulation modes are ready to use when you receive the device. You can give this stimulation to the dog by pressing the button to follow by the left diagram. Always start the Volume Dial from the low level.
See LCD Display Description for how stimulation works and under­ stand before using it for your dog.

How to Find Proper Stimulation Level

900 Pro Educator supports 100 different stimulation levels.
Getting to know proper stimulation for your dog is the key to successful training. This is a simple guide to finding out the proper stimulation level, there is more detailed training guide on Page 18.
Important Notice: Rotate Volume Dial counter-clockwise to increase stimulation level, rotate Volume Dial clockwise to decrease stimulation level.

1. Put the collar receiver on your dog, and let him/her get used to the receiver

2. Turn the Volume Dial to “O” and press the Instant stimulation button (S4).
   Increase the level one by one and repeat until the dog makes any indication of noticing the stimulation; this could be an eye twitch or scratching the collar receiver. Most dogs respond between 5 and 20. Remember the stimulation level that your dog responds to, this is the proper intensity level for your dog.

3. Press Instant stimulation (S4) again to turn off Instant stimulation mode.

Caution:
If your dog reacts too hard from stimulation or seems erratic,
TURN OFF STIMULATION IMMEDIATELY

Program Stimulation Buttons

You can Program any stimulation mode to S1, S2, S3 and S4 Buttons.

1. Press and hold the P button until is displayed.

2. Press any one of the S1-S4 buttons repeatedly until the stimulation mode you want to set.

3. Stimulation mode will change as follow :
   

4. Repeat steps 1 to 3 to program another button.

5. Press P any time to exit the Programming mode.

How to Lock & Unlock Stimulation Level
Lock the stimulation level to protect from unexpected high-level stimulation.

1. Press and hold the P button is displayed.
2. Press any one of the S1-S4 buttons repeatedly to select either M or C.
3. Use the volume dial to change the stimulation level.
4. Press and hold the same stimulation button until 1 icon on the LCD will change from blinking to solid.
5. Press the P button to exit from the Programming Mode.
6. Repeat steps 1 to 5 to unlock the stimulation level.

Important Notice: When Stimulation is locked, the Stimulation level will not change even though you change the Volume Dial

Instant Stimulation

Instant Stimulation gives Stimulation continuously for up to 45 seconds follows by Volume Dial. Volume Dial must be O to activate Instant Stimulation level.
Caution: DO NOT FORGET YOUR DOG GETS STIMULATION EVERY SECOND UNTIL INSTANT STIMULATION TURN OFF.

1. Set Instant Stimulation on any Stimulation Button.
2. Turn Volume Dial to O to activate (Require). You will see [ 0n ] icon.
3. Press Stimulation Button at #1, and Turn Volume Dial for starting the stimulation.
4. Stimulation will automatically shut down in 45 seconds. Change stimulation level to O level will reset the 45 seconds safety timer.
5. Press the assigned Stimulation Button at #1 to turn off Instant Stimulation.

Boost Level Setup

Boosted stimulation gives stronger than regular stimulation.
Default Boost Level is 5
For example, Momentary Boosted Stimulation (M+) gives a level of 30 stimulation when the stimulation level is 25 and the boost level is 5.

1. Press and hold the P button until PR is displayed
2. Press the ON/OFF button one time, and check the [ +] icon at the LCD.
3. Use the volume dial to change desired boost level and press S1 to save.
4. Press P button to exit from the programming mode.

Night Tracking Light

Night Tracking Light provides bright light from the receiver.
This feature provides bright vision around your dog and shows where your dog is heading to.
This feature cannot be programmed on Stimulation Button

1. Press and hold the P button until PR is displayed.
2. Press the ON/OFF button two times, and check the [ ] icon on the LCD.
3. Press any one of the S1 – S4 buttons to activate.
4. The receiver light will change OFF -> Blinking -> Solid when you press S1 ~ S4 each time.
5. Press the P button to exit from the programming mode.

Important Notice: Exit from programming mode does not mean turning off the Night Tracking Light.
Using this feature cause spend Receiver’s battery to dramatically

Lost Transmitter

A lost Transmitter is an alarm feature, which prevents loss of the transmitter. If you activate the Lost Transmitter feature, the device will make a high tone sound after 6 hours.
This feature cannot be programmed on Stimulation Button

1. Press and hold the P button until PR is displayed
2. Press the ON/OFF button three times, and check the [ ] icon on the LCD.
3. Press any one of the S1 ~ S4 buttons to start the alarm timer.
4. Transmitter LCD shows [ 0n ] when activated, and the icon will remain on LCD until the alarm goes OFF.
5. Press the P button to exit from the programming mode.

Two Button Boost
When you use a 2 dogs or 3 dog system, there is an easier way to use Boosted stimulation. Instead of setting Boosted stimulation on the stimulation button, you can do it with two button  combination
Important Notice: This feature only supports Momentary and Continuous

1. Press Stimulation Button either Momentary or Continuous
2. Before you release the stimulation button, press above or beneath Stimulation Button simultaneously for additional boosted stimulation
   

Warning Mode
Warning Mode is a special feature on the 3 Dog System only.
Every dog’s Stimulation Modes will change to Vibration. We recommend this feature when you don’t have time to change Stimulation modes.

1. Press the P button to activate Warning Mode.
2. After one beep, any stimulation modes of S2 S3 S4 except tone will change to vibration automatically.
3. To exit from the warning mode, press the P button one more time.
4. After two beeps, all stimulation modes change to the previous preset.

How to replace for new Receiver by Pairing

1. Make sure the Receiver is turned off.
2. Press and hold the P button untill displayed.
3. Press the ON/OFF button four times, and check the icon at the LCD.
4. Put Transmitter’s red dot on Receiver’s red dot for more than 5 seconds.
5. If Indicator Light on the receiver rapidly blinking with green color, press S1 to complete replacement. You will hear confirming sound.
6. Press the P button to exit from the programming mode.

Multi Dog System
900 Pro Educator supports a multi-dog system, which is controllable for up to 3 dogs. Press the ON/OFF button + S1 button simultaneously to change Dog System.

Stimulation buttons work differently while multi-dog Systems.

Stimulation
Buttons| Stimulation buttons for multiple dogs
---|---
1 Dog System| 2 Dog System| 3 Dog System
S1-Button| Dog 1| Dog 1| Dog 1
S2-Button| Dog 1| Dog 2| Dog 3
S3-Button| Dog 1| Dog 1| Dog 1
S4-Button| Dog 1| Dog 2| Dog 2

How to Add a Collar for Multi Dog System

Default Stimulation buttons for Multi Dog System

How to add an extra receiver for the second dog
2 DOG

1. Make sure the Receiver is turned off.
2. Press the ON/OFF button four times, and check the icon on the LCD.
3. Press and hold the P button until is displayed.
4. Put Transmitter’s red dot on Receiver’s red dot for more than 5 seconds.
5. If Indicator Light on the receiver rapidly blinking with green color, press S4 to complete replacement. You will hear confirming sound.
6. Press the P button to exit from the programming mode.

How to add an extra receiver for the Third dog
2 DOG

1. Make sure the Receiver is turned off.
2. Press the ON/OFF button four times, and check the icon on the LCD.
3. Press and hold the P button until is displayed.
4. Put Transmitter’s red dot on Receiver’s red dot for more than 5 seconds.
5.  If Indicator Light on the receiver rapidly blinking with green color, press S2 to complete replacement. You will hear confirming sound.
6. Press the P button to exit from the programming mode.

Important Training Tip
E-Collars should be used to reinforce commands your dog already knows. It is not a replacement for basic leash obedience training, but a tool to allow you to better communicate with your dog. For best results, use the least amount of stimulation required to get compliance from your dog. A calm and consistent approach to training will always produce better long-term results.
It is highly recommended that aggressive dogs be taken to a professional trainer for evaluation before e-collar use. There are many different e-collar training techniques recommended by a variety of professional trainers. We believe you, the owner of the dog, can best determine the most successful technique for your dog. YouTube has many videos demonstrating these varying techniques by simply searching “educator e-collar training” or “remote dog training techniques with an educator”.

Troubleshooting

My Receiver/Transmitter is not turning on
G Make sure the Receiver has been charged. We recommend device be fully charged before use.
My Receiver is not responding
A. Check Receiver’s indicator light is blinking green and Transmitter LCD to check device power.
Check Receiver’s indicator light is red when you press any stimulation button.
A. If you don’t see any red light, check your device using right
Multi-dog system. For example, if you have one dog, you must small 1 icon only at “Multi Dog system Indicator” on the LCD display.
B. If the still Receiver does not respond, Try pairing with the Receiver one more time.

I think the receiver gives no stimulation at all
A. Remove Contact points from Receiver. Connect Test Light on the Receiver and try any stimulation. If the test light is blinking, the receiver is giving a stimulation.

Max range of devices has been decreased
A. Check the Transmitter’s battery condition. The working range decrease if the battery level is too low.
A. Holding position is important; keep your finger away from the antenna.
Touching the antenna by a finger will greatly reduce the range.

I want to reset the Transmitter as default
G Rotate Volume Dial to 0, press ON/OFF + S3 simultaneously for 6 sec.

WARRANTY AND REGISTRATION

To register your Pro Educator please select one of the following procedures

1. Go to the Products” section on www.ecollar.com and dick the Register Your e-Colar Products” tab and complete the form
2. Fil out the provided warranty registration card and mail it or fax it to us at 1-855-226-5527
3. Call us at 260-357-0051 and one of our customer service representatives will register your products for you, please have your serial number available

Two-Year Full Warranty:
Your product is covered by our full two-year warranty During the warranty period we will repair and or replace your product for any reason due to workmanship and component failures. Dog chews and misuse are not covered by the warranty and are subject to a repair/replacement fee.

Important Notice to Consumer/User
In no event shall our company be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected  with the use or misuse of our products

IMPORTANT NOTICE

The item should be placed out of the reach of children.
This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. This includes cleaning and maintenance.
Item is only to be used with the power supply (charger) provided with this product.

E-Collar Technologies, Inc.
This product is covered by various patents including but not limited to
patents 8757098 and 8833309. A patent is pending on the Instant
Stimulation Feature on this device
2120 Forrest Park Drive
Garrett, IN 46738-1887
1-260-357-0051 (US & International)
1-855-326-5527 (US Toll-Free)
1-855-226-5627 (US Toll-Free Fax)
sales@ecollar.com
www.ecollar.com
customerservice@ecollar.com Thank you for Supporting American Workers
Copyright 2014 E-Collar Technologies, Inc
All Rights Reserved

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>