Shenzhen Tuomawei Electronics I8 Mini Wireless Keyboard with Touchpad User Manual

June 5, 2024
Shenzhen Tuomawei Electronics


User Manual

Introduction

Product Overview

Touchpad

This product was added to the innovative function Of the mouse wheel, when you press the Fn button With your fingers Touch anywhere in the sliding region, which can facilitate the realization of the mouse wheel functions. With this human design, it can be easier to browse the web better, and edit documents.
Connecting the receiver
Slide the receiver out from the side of the keyboard, and insert it into the devices with a standard USB interface. Once connected, slide the power switch to the “ON” position located on the left side of the unit to establish the connection.
Auto sleep and wake feature
The keyboard also features an auto sleep and auto wake mode. If there is a long period of inactivity, the keyboard will automatically go into sleep mode. During the sleep mode, the user can wake the unit up by pressing any key. The 2.4 GHz receiver and keyboard’s RF indicator will continue to flash and will not power down.

Switching off the keyboard after use

After finishing using the keyboard, push the switch to the off position. This turns off the power, of the keyboard. The USB receiver should be plugged out from the PC and then inserted back into the keyboard so it is being kept safely.

Charging the battery(Only for Configure A)
For the device with a built-in lithium-ion battery, please use only approved data lines and chargers.
Fully charge the unit before operating it for the first time. This device can be used when charging, but will extend the charging time;
When the battery is low, the low-voltage light will flash to warn the user. The unit will automatically turn off if the battery has been depleted.
Notes: This product has the configuration A and B configurations can choose
Configure A s lithium battery version, this version built-in rechargeable lithium battery, and an additional charge USB line.
Configure Bs Install AAA * 2 battery, this version does not support the charging function.
LED Backlight (optional)
Fn+F2=3-Color LED Backlit & Backlight (optional)

Appendix
Technical parameters

Specification

Measurements (L x W x H): 146.8 x 97.5 x19mm
Weight (grams): 110g
Operational Range: up to 10 meters
  Transmit power: +5db Max.
Operation voltage: 3.3V

  • Operation current: <50mA
    Charging current: < 300mA
    Sleep current: <1mA
    Computer system requirements

Windows 2000
Windows XP
Windows Vista, Windows Windows 7
Linux(Debian-3.1,Redhat-9.0 Ubuntu-8.10 Fedora-7.0 tested)

Maintenance

Do not attempt to disassemble the device or replace the rechargeable battery. Doing so will void the warranty.
The battery will discharge if stored for a long period of time without usage.
Use the specified charger. Disconnect the device after the battery has been fully charged. Overcharging the battery will shorten the life span of the battery.
Do not expose the device to extreme heat or cold. Extreme temperatures will cause the life span of the battery to shorten.
Use only a damp cloth with mild soap to clean the device. Solvents and other cleaning agents may cause damage to the device.

Troubleshooting

Below are some basic troubleshooting scenarios for the device. Please contact support from the place of purchase if you are unable to resolve any issues with the device.

Problem Possible issue Solution
The unit does not respond. 1, Low battery power.
2, Unit is not turned on. 1. Configure A: Charge the device for at least 15

minutes. Configure B: Replacement of the AM * 2 battery
2. Check if the switch is selected in the “ON” position.
The keyboard cannot establish a connection to the receiver.| 1, The receiver may not be inserted correctly.| 1, Disconnect and reconnect the receiver to the USB port.
The mouse pointer moves erratically and/or is unresponsive.| 1, the Device may not be within the optimal range of the receiver
2, Low voltage
3,  Dust or oil on the touchpad.| 1,    Bring the unit closer to the receiver.
2,    Please recharge(for Configure A) or replace the battery(for Configure B)
3,    Clean the touchpad with a damp cloth.
The unit does not charge (only for Configure A)| 1, Defective battery.

2, Check connections.

| 1, Contact your local dealer for replacements.
2, Verify if the device is securely connected to the charger.

Notes: In line with the policy of continued development The manufacturer reserves the right to amend the specifications without prior notification, The pictures, and date in the stylebook are consulted only, if there is fluctuation, According to the real object, please. Since devices using 2.4G technology communicate using radio waves, your device and the other devices do not need to be in a direct line of sight. The connection can be subject to interference from obstructions, such as walls, or other electronic devices

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals