Intuition Robotics TAB-002 Smart Tablet User Guide

Warning：
the tablet should be opened and used on the charging base. The product cannot be used alone without the charging base. Because there are metal contacts at the bottom of the flat panel that needs to communicate with the flat panel to transmit medical signals, the flat panel should always be placed on the charging base for use. If you hold it in your hand, you cannot communicate with the charging base. Installation guide: Put the tablet computer on the charging base, charging base connected to the power will automatically charge, press on the key to start, as shown in the picture below.

Acknowledgment

Thanks for your purchase of our product,it is an 8inches high clear board computer. Its CPU is MT8735V/WM it is based on the Android 8.1 operation system, and easy to expand the third application procedure. It is easy to achieve wireless communication and internet, you have access to surf the internet anytime and anywhere; it is also built with high accuracy GPS module so that it can be used for navigating through installing map software. There are many sensors that offer you brand-new operation and entertainment; besides, it has camera shooting, which leads electronic consumption to enter into a fresh palm internet entertainment time. The manual systemically introduces the functions, use techniques and announcements, please read this manual carefully before your operation.

Announcements

Preventive maintenance Please always keep the MID dry. To avoid the device short trouble, corrosion fault, and electric short, please prevent the device, battery, and charger from water and moisture, and don’t operate the device or charger by a wet hand. To avoid failure of the device, battery, and charger, please prevent the device, battery, and charger from violent shock or shake. To avoid failure of device, battery, and charger, please prevent the device, battery, or charger of overheating or too cold circumstances Never shock, throw, prod the MID, or drop, extrude, or bend the MID. Never disassemble the device and accessories arbitrarily, otherwise, the device and accessories are not in our company warranty scope.

MID Introduction

MID Operation and Preparation

Battery Charging
If this navigator is first used, please use AV adaptor base to fully charge it.
1. Apply the power adaptor base to charge for MID.
2.2 MID Status and Reminder
Reminder icons
When some reminder message appears in your reminder window, please click the column and slip the screen to open the reminder list. Choose the menu you need, and confirm the information. Then you can close the reminder window by clicking the column to slide up. Please refer to below status icons:

| New email
---|---
| USB connected
| USB debugging connected
| Return button
| Downloading
| Display recently-used application
| Home button
| Current electric volume.
| WIFI connected, the internet is available

 Reminder Board

Reminder icons will work while receiving emails, WIFI is open, you can open the reminder board to view the detailed information.
Open the reminder board
When the reminder column shows a new reminder icon, please hold the column and slip down your finger, then the reminder board is opened.

Quick Start Guide

Startup and Shutdown

Startup
Long press the POWER key for three seconds, and you can enter into the startup picture. The system enters into screen lock status, please unlock it.
Shutdown

1. Long press POWER, it will popup shutdown window.
2. The shutdown window contains airplane mode, reboot mode, and shutdown three options.
3. Click Shutdown is the last step.

3.2 Open and Close of the Screen
The screen will be closed on its own when no operation happens.
The screen will be closed on its own if no operation happens for some time to save battery power

1. When the screen is open, press the POWER key, and the screen will be closed immediately.
   Open the screen when it is closed.
   If the screen is closed, short press POWER to open the screen. The screen will be locked open it, it will show the picture below picture, left slide to unlock and enter into the camera, right slide to unlock and enter into the phone.

3.3 Usage of Touch Screen
MID operating methods
There are below methods to view the main screen, menu, and application procedure in your MID.
Click
When you want to use the screen keyboard typing or choose an application in the main interface, you only need to touch it by your finger.
Press on
If you want to open some item( textbox or the link in the webpage), or shortcut and main procedure move, you can press on this item.
Quickly slide or slide
Quickly slide or slide indicates to make quick vertical or horizontal movement by finger.
Pull
Before you pull, you need to hold it and pull it into the position you want.
Rotate
For most pictures, you only need to rotate the MID to change the screen direction from horizontal to vertical. For instance, when you are typing words, and watching movies.

3.4 Home Page
The main interface as below picture 3.2, long press the blank and it will popup windows to set wallpaper, folder, widgets, and shortcut.
The extended home page
The home page can be extended beyond the wideness of the screen to provide more space, where you can put new-added shortcuts and widgets. Click the blank space in the home page then slide right or left to extend to the right or left of the screen. On the home page, there are two extended pictures, as Picture below

The shortcut icons management in a desktop application.
Create a folder icon on the desktop

1. Drag the icons that need to be put together on one icon(can also overlay several icons)as Picture below
2. Then click the over-layered icons, and the applications can be folded, as Picture below
   Click the unnamed folder in the black box, it will popup the hidden keyboard, the folder name can be renamed (this is similar to the Apple IOS system), the position of the icons can be changed through long press

Remove the icons on the desktop

1. Long press the icons need to be removed, then on the middle above of the screen,   it will appear icons.

2. Drag the icon to the above of the remove icon, till the icon become red, then move your finger to delete the icon.
   Change the wallpaper of desktop

3. In the home page, long press any blank space in the main screen, it will pop up a window to change the wallpaper.

4. Click the gallery or wallpaper gallery to select the wallpaper

Basic Setting

 Wireless and Internet

1. Connect Wi-Fi

1. In the main menu or interface, choose the setting application procedure.
2. Click WLAN, open wifi, MID will automatically search the available Wifi wireless internet. As Picture below
3. Choose the Wi-Fi internet you want to connect to, if it has a password, it will pop up the password window, enter a password, and click connect
4. Network Notice
5. If you open Network Notice, when the WIFI signal appears, the right bottom will remind you available WLAN network, as Picture 4.1
6.  Keep WI-FI on during sleep..

1. Click   the icon on the right top of Picture 4.3, and select advanced.
2. Click Keep WI-FI on during sleep, as the below picture shows:

3 Bluetooth
Bluetooth function operation

1. Click setting application in the main menu interface
2. Click Bluetooth and open it.
3. If somebody opens Bluetooth in your surroundings, click the search device in right and then MID will automatically search the Bluetooth device nearby. As picture below:
4. Click the available Bluetooth device, it will pop up a request window, enter the related password, and match the device to connect.
5.  After matching successfully, choose the operation you want to, and click **** to enter into the Picture below:

4.4 Display
4.7-1 Adjust the screen brightness

1. Click Setting application procedure.
2. Click display, choose brightness,
3. Drag the portfolio to adjust the brightness volume.

5.1 Music
Enter into music player: in the menu or desktop click the music icon to enter into the music player, click the music you want to play,

5.2 Photo Gallery
The photo gallery application can auto search photos and video files in an SD card, and the photo gallery will classify these photos and videos in a folder. You can apply a photo gallery to view and edit photos, set the photos as wallpaper, and watch the video.
View pictures

1. Click the gallery application in the main interface.
2. Enter into the gallery, and click the folder you want to view.
3. Click the picture you want to view, the system will play it in full-screen mode automatically.
4. The pictures can be zoomed in and zoomed out, put two fingers on the screen, the
   Seperate the fingers(gather up the fingers, the picture will zoom in) or double-click the screen.
   Note: when you browse the pictures, slide left or right to view more pictures Edit and set pictures

When checking the pictures in full-screen mode, click the menu key to display the menu selection, you can choose the selection you need to edit and set pictures.
Slide Show

1. Open a picture, use the virtual key to click the menu key, and display the menu selection.

2. Click slide show, it will auto loop play
   Crop

3. Click the menu key to display menu selection.

4. Then click crop, click and drag related area to adjust the cropper.

5. Click cropper and drag it inside and outside to adjust the image.

6. After adjusting the size you want, click crop.

7. If you wish to give up to crop, click cancel to return to the picture browser
   Edit

8. Click the menu key, and display the menu selection.

9. Click edit.

10. Adjust the brightness, style, color

11. Click save.

12. If you want to give up editing, click the return key, click not to return to picture Browser

7.1 Browser
In case of Wi-Fi or mobile internet is connected well (Please refer to Chapter 4.1 for wireless and internet settings), click IE browser in the main menu or desktop to enter the IE interface,
Click the address bar to input the website, click Start, enter a related webpage, then you can browse   the website information, as Picture and you can click the menu you can refresh, save to bookmarks,, share page, bookmarks,, history and setting the webpage

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>