nutrichef NWIRBBQ99 WiFi Wireless BBQ Digital Thermometer User Guide

: June 5, 2024
: nutrichef

Table of Contents

nutrichef NWIRBBQ99 WiFi Wireless BBQ Digital Thermometer
Screen Introduction
Battery Recharging
Install the Probes
Download the APP
Activate device and pair with your phone **
Enjoy your barbecue time
- Probe Color Configuration
Setting the Ambient Temperature Probe
Setting your meat probes
Reviewing menu options
FCC Caution
Features
What’s in the Box
Technical Specs
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nutrichef NWIRBBQ99 WiFi Wireless BBQ Digital Thermometer

nutrichef NWIRBBQ99 WiFi Wireless BBQ Digital Thermometer
product

Screen Introduction

nutrichef NWIRBBQ99 WiFi Wireless BBQ Digital Thermometer
01

Battery Recharging

Please use Type-C cable to charge the device

Flashing: Low power (Need to charge)
Progress bar: Charging
Full icon: Fully charged

Install the Probes

The device will keep scanning the sockets when its power is switched ON, the Probe icons on LCD will display one by one from 1 to 6 where probes are plugged in. Then insert the probes into the food, make sure the front tip of the probe is in the center of the food to get accurate temperature.

Download the APP

Search the keyword ‘To Grill’ in App store or Google Play, or scan the following QR code with your phone. Download and install it for free.

Make sure your phone meets the requirements:
iOS devices running version 11.0 or later. Android devices running version 5.0 or later, with BT 4.0 module or later.
Power ON/OFF

Press and hold the button for more than 3 seconds when it is in OFF mode, it will be powered on. The LCD display will show ‘ON’.
If you do the same when it is in ON mode, it will be powered off.
When there is no probe inserted in the device, it will be powered off automatically.

Activate device and pair with your phone **

**

Switch ON your device and keep the BT switch of your phone on.
Activate device:
- Launch the ‘To Grill’ app,
- Enable mobile phone permissions
- Follow the instructions in the app to activate the device
Pairing:
- Sign up for an account in the app.
- Press and hold ‘PAIR button’ for 3 seconds and confirm that screen backlight is blinking.
  (Open the stand at the back of the device)
- iii: Select 2.4GHz Wi-Fi network and enter password
Connected successfully.
Once Paired the device with your phone, you don’t need to do it again, unless you change to other phones.

Enjoy your barbecue time

Choose food type and preference for the food where each probe is inserted, the app and the device will display its current and target temperature.
When the food is ready, the app and the device will alarm.
The user interface of the app may be changed when upgrade. Please follow the instructions in the app.

Probe Color Configuration

It’s difficult for you to distinguish different probes when you have several probes using at the same time.
The app provides 6 colors for each channel, which enables users set them to be identical to the color of the probes. The probes comes in 6 colors as well.

Setting the Ambient Temperature Probe

After pairing, insert the pit probe into the socket with the fire/flame logo and the following screen will display.
Tap on icon located at the bottom right of the screen to set your monitoring parameters of the pit probe.
From this screen, you can set custom alarm notifications to monitor the cooking temperature of your barbecue/pit.

Setting your meat probes

Insert probes into the Thermometer sockets and the below screen will display on your phone.
To cook using preset or customized meat temperature settings, tap on the icon.
The menu selection screen will then display.

From your home page, tap on the icon in the top left-hand corner to open the menu side bar and the menu screen will display.
Select ‘Settings’ option to:
- Set temperature unit F°/C°
- Set an alarm ring tone, vibration alert or alarm interval.
- Toggle push notifications

WARNING
The heat resistance varies in diﬀerent components of the probe,

DO NOT put the probes directly in fire flame.
DO NOT put the wrap into oven, or it will melt!
Probes are NOT dishwasher safe.

DEVICE CRASH CONDITION:
Press the reset button, the device will automatically restart.
Attention:
Temp. probes above for reference only, subject to the actual probes.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Information to User
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Information to The User
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.