Seamax Bimini Top Pontoon Fitting Kit User Manual
- June 5, 2024
- SEAMAX
Table of Contents
Seamax Bimini Top Pontoon Fitting Kit
Traditional Bimini Top sellers had no good solution for Inflatable Boats, they are either weak to support or hard to install. Seamax developed this special Bimini Pontoon Fitting Kit for all inflatable boats, Installation Dimensions 3”x5”. The patch has the curve interface to attach on the pontoon; it is also built in a strong stainless bracket to support the Bimini weight up to 100Lbs and 30 knots wind speed. Fitting can turn 180 degree wide angle, it has no limitation to install it at any position. Its design and quality had been recognized as the best solution by Zodiac dealers. T his package also comes with stainless steel hardware, including bolts, lock pins and wind nuts. You can choose different hardware for your Bimini top as temporary or permanent installation solution. PVC & Hypalon boat compatible. Glue is included in the package.
Glue Instruction of Pontoon Fitting Patch Installation
- We suggest to use a small painting brush to apply 1 2 layer(s) glue on both material surfaces. Wait 5 minutes between applications to allow glue to dry and then attach the two pieces of material together. Once you have applied the patch, work from the center out with something like a teaspoon to force out any air bubbles and then apply pressure to the repaired area for at least 24 hours. Wait 48 hours for the glue to cure before using.
- If you install this pontoon fitting onto a Hypalon boat, you need to sand off the Hypalon outside coating u ntil you can see the bottom layer, then you can start to apply the glue. Please use paint tape to cover the edge of installation area to protect the boat.
- Note : Suggested to apply the glue 1 2 layers on new fabric surface; 1 2 layers on old fabric surface; 2 3 layers for wood or plywood surface; 1 2 layers for parts or aluminum surface.
- Seal the bottle right away and store it in a cool area so that it may be used again. To clean the material surface area for repair, please use Methyl Hydrate, Acetone or M.E.K.
Distributor : Seamax Marine and Outdoor 102-19155 38 Ave, Surrey, BC V3Z0Y6, Canada www.seamaxmarine.com support@seamaxmarine.com Toll free: 1-877-907-7766 Tel: 604-277-7766
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>