VONYX AV510 Home Karaoke Microphone Control System Instruction Manual

: June 5, 2024
: VONYX

Table of Contents

UNPACKING INSTRUCTION
FRONT PANEL
REAR PANEL
OPERATION
BT CONNECTION
CONNECTION EXAMPLES
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VONYX AV510 Home Karaoke Microphone Control System

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.

Prior to using the product, please ask advice from a specialist. When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The product contains voltage carrying parts. Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the product. This may cause electrical shock and malfunction.
Do not place the product near heat sources such as radiators, etc. Do not place the product on a vibrating surface. Do not cover the ventilation holes.
The product is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the product from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the product with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the product to a rheostat or dimmer.
To avoid fire and shock hazard, do not expose the product to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the product to an earthed mains outlet (220240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the product will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the product has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the product in humid rooms or outdoors.
To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
Do not repeatedly switch the product on and off. This shortens the life time.
Keep the product out of the reach of children. Do not leave the product unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
If this product is with speaker inside which can cause magnetic field. Keep the product at least 60cm away from computer or TV.
If this product have a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.
If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
If the product has fallen, always have it checked by a qualified technician before you switch the product on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the product with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Switch the product off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the product.
Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this product.
Keep the original packing material so that you can transport the product in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.

The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving of the equipment, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that an equipment must be returned to the factory, it is important that the equipment be returned in the original factory box and packing. If the equipment has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

FRONT PANEL

POWER ON/OFF
Press to turn on/off the device.
MUSIC VOLUME CONTROL
Turn to control the music volume.
ECHO EFFECT
Turn to adjust the echo effect for both microphones.
TONE CONTROL
Turn to adjust the tone for both microphones.
MICROPHONE A VOLUME CONTROL
Turn to control the volume level of microphone A.
The LED lights of this knob will light up when microphone A is connected successfully with the AV510 controller.
MICROPHONE B VOLUME CONTROL
Turn to control the volume level of microphone B.
The LED lights of this knob will light up when microphone B is connected successfully with the AV510 controller.
IR & LED LIGHT CLUSTER
IR – Infrared receiver for remote control
COAXIAL – LED will light up when coaxial signal is detected
OPTICAL – LED will light up when optical signal is detected
BT – LED will light up when BT connection has been successful
LINE – LED will light up when LINE signal is detected

REAR PANEL

AUXILIARY OUTPUT
3.5mm stereo jack output. Use to connect with, for example, an amplifier or a computer.
AUXILIARY INPUT
3.5mm stereo jack input allowing you to connect various external audio devices.
OPTICAL INPUT
Optical input terminal allowing you to connect
to TV, set-top box, etc.
COAXIAL INPUT
Coaxial input terminal allowing you to connect to TV, set-top box, etc.
DC 5V IN
5V adapter input.

OPERATION

Connect the AV510 controller to a power outlet via the supplied power adapter. Check and make sure that the mains voltage corresponds with the supplied adapter. By using any other voltages than specified, the equipment can be irreparably damaged. Do not use a dimmer or adjustable power supply.
Put two alkaline AA batteries in the battery compartment of the microphone(s). Make sure that the positive and negative poles are corresponding with the markings within the compartment.
Slide the ON/OFF switch of the microphone(s) in the ON position. The microphone(s) will connect with the receiver automatically, the LEDS on the knob of the corresponding microphone channel will light up.

BT CONNECTION

Activate the BT-function on your device (mobile phone, tablet etc.) from which you want to play the music. See the operating instructions for that device.
Select “VONYX AV510” on your BT-device and make the BT-connection. No password is required.

Attention: The BT distance is approx. 10 meter without any barrier.