DS18 PRO-DRNCOAX Neodymium Polyester Mid-Driver Bullet Tweeter Coaxial Compression Driver Owner’s Manual
- June 4, 2024
- DS18
Table of Contents
DS18 PRO-DRNCOAX Neodymium Polyester Mid-Driver Bullet Tweeter Coaxial
Compression Driver
MEASUREMENTS
CONNECTORS
SPL VS FREQ GRAPHIC
GENERAL SPECIFICATIONS
- Throat Diameter ………………………………………………………………….2”/50.8mm
- Installation Type………………………………………………………………………….Bolt-on
- Sensitivity (1w/1m) ……………………………………………………………………… 118dB
- Frequency Response ……………………………………………………….315Hz-20KHz
MID-DRIVER SPECIFICATIONS
- Peak Power Handling …………………………………………………………………..640W
- Program Power Handling ……………………………………………………………..320W
- AES Power Handling ……………………………………………………………………160W
- Frequency Response ………………………………………………………315Hz – 20KHz
- Recommended Band-Pass Crossover…………………………………630Hz – 5KHz
TWEETER SPECIFICATIONS
- Peak Power Handling …………………………………………………………………..240W
- Program Power Handling ……………………………………………………………..120W
- AES Power Handling………………………………………………………………………60W
- Frequency Response ………………………………………………………. 4KHz – 20KHz
- Recommended Hi-Pass Crossover………………………………………………… 5KHz
MOTOR
- Tweeter Voice Coil Diameter……………………………………………..1.75””/44.4mm
- Mid-Drive Voice Coil Diameter ………………………………………………..3.5”/90mm
- Voice Coil Former Material ………………………………………………………….Kapton
- Winding Material ……………………………………………………………………….. CCAW
- Diaphragm Material ………………………………………………………………… Polyester
- Magnet Material…………………………………………………………………..Neodymium
MEASUREMENTS
- Overall Diameter ………………………………………………………………..5.5”/140 mm
- Overall Depth …………………………………………………………………….3.9”/101 mm
- Bolt Pattern…………………………………………………………………….M6 – 4”/102mm
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>