Salem T09 27 .5 Inch Brown Table Lamp Set Instruction Manual
- June 4, 2024
- Salem
Table of Contents
Salem T09 27 .5 Inch Brown Table Lamp Set
STEPS TO ASSEMBLE THE LAMPSHADE
-
Take out the lampshade and 2 wrought iron frames
-
Unfold the fabric lampshade
-
Fix the two frames with velcro along the edge of the lampshade
-
Mount the harp and install the bulb (Not included)
-
Tighten the finial to secure the lampshade
Assembly & Installation Instructions
Dear Customer: Thank you for your business! If you have any question or problem, please send us an email to [email protected] or call us at 870-949-8466. We will do everything possible to make you completely satisfied with your purchase. Product reviews help future customers to make their purchase decision. You are encouraged to share your experience by leaving a short product review on the platform where you bought this product. hank you Zgear Team
Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
Warning: California Residents Proposition 65 This product contains lead, a chemical known to the state of California to cause cancer and birthdefects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: lt is highly recommended to get an electrician to install this
light. Please make sure to turn the electricity off at the main circuit
breaker before beginning installation. All glass is fragile. Use care when
handling glass component(s) and/or lamp(s)
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the lamp socket(B)into the body(A) until tight.
- Place the harp(C)onto the lamp socket(B).
- Place the shade(D)onto the harp(C).
- lighten the finial(E)into the harp(C)until tight.
WIRE CONNECTION DIAGRAM
Wires meeting safety standards are required to connect the electrical circuit
CAUTION: Risk of fire
Please read all instructions carefully. Before yobu proceed to install,make sure that the power supply is turned off and remains off until installation is completed.