iCES IBT-6 Speakertower with Bluetooth User Manual
- June 4, 2024
- Ices
Table of Contents
Model: IBT-6 User manual Speakertower with Bluetooth, FM radio and USB
READ THIS INSTRUCTION MANUAL BEFORE OPERATING THE APPLIANCE. AND SAVE IT
FOR FUTURE REFERENCE.
Thank you for purchasing Tower Speaker
Getting started
- Remove the equipment from the box.
- Remove packaging and place it inside the box to store for future reference and/or use
In the box
- Tower speaker unit
- Tower stand and screws to attach the unit
- 3.5mm Aux cable
- Instruction manual
- Remote control
Features
- 4 Stereo Speakers
- Bluetooth® Connectivity
- Aux Jack Included
- Aux Cable Included
- USB Port for charging
- USB Port for playing MP3
- SD card slot for playing MP3
- FM radio
- LED display
Safety instructions
When using electrical equipment basic safety precautions should always be followed
- This equipment is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience or knowledge. They should be given appropriate supervision and instructions to use the equipment by a person responsible for their safety.
- Ensure the equipment is not too close to heat-emitting appliances or placed in direct sunlight.
- Check that the voltage indicated on the data plate corresponds with that of the local network before connecting the equipment to the main power supply.
- Do not leave the equipment unattended while connected to the power supply
- Do not immerse the equipment in water or any other liquids.
- It is imperative to unplug the power cord after the equipment has been used, before it is cleaned and while being repaired.
- Close supervision is required when using this equipment near children.
- Never leave the equipment within reach of children.
- Repairs to electrical appliances should only be performed by qualified personnel. Improper repairs may place the user and/or equipment at serious risk.
- This equipment is intended for household use only and should not be used for industrial or commercial purposes.
- Do not operate this appliance with a damaged plug or cord, after a malfunction or after being dropped or damaged in any way.
- Do not use this equipment for anything other than its intended use.
- This equipment must be placed on a stable, heat-resistant surface.
- Do not push objects into any openings as damage to the equipment and/or electric shock may occur.
- Do not use this product in wet or bad weather conditions.
- This product is not a toy.
- Do not play music at excessive levels, especially near children.
Description of parts
Top panel
- STANDBY
- Mode
- Mute
- Volume control
- LED display
- Play/pause
- Skip forward
- Skip backward
Front
- Speaker
- Remote Sensor
(Point remote to the Remote Sensor)
Back panel
- USB port for charging(5V 1A)
- 3.5mm Aux-in Jack
- SD card slot for playing MP3
- USB port for playing MP3
- FM antenna
- AC Cable
Remote Control
Point remote at the middle of speaker
- STANDBY
- USB/SD mode button
- Mute button
- Aux in button
- FM radio button
- Bluetooth button
- Skip backward button
- Play/Pause button
- Skip forward
- Scan button
- CH-
- CH+
- Bass+ effect button
- Bass- effect button
- Treb+ effect button
- Treb- effect button
- Volume+ button
- Volume- button
Setting up the speaker tower -Attaching the base
- Take the tower body and base carefully out of the packaging.
- Take the screws and washers out.
- Attach the base to the body aligning the holes on the base with the holes on the tower.
- Screw the base onto the main unit.
- Place the tower upright on the floor and it is now ready to use
Power setup
Connect the AC/DC adapter to the DC in the socket on the speaker back panel
and plug the adaptor into the main socket.
Using the remote control
The battery
To get your remote control working initially, pull the clear tab from the
battery compartment located at the bottom of the remote.
If your remote becomes intermittent or you find you have to move closer to the
unit to operate, then probably the batteries need to be replaced.
To replace the batteries, slide the holder out from the base of the remote.
Remove the battery and replace it with a 3-volt Lithium CR2025.
WARNING!
Do not ingest the battery, Chemical Burn Hazard
(The remote control supplied with) This product contains a coin/button cell
battery.
If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from the children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. The batteries shall not be exposed to excessive heat such as sunshine, fire, or the lake. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Aux-In line in type
Requires a 3.5mm cable (included)
- Connect a 3.5mm cable to the Aux-in jack at the rear. Connect the other end of the 3.5mm cable to an MP3 player or another audio source.
- Press the “STANDBY” button to turn the unit on, and press the “MODE” button on the top panel or press AUX on the remote control, to choose the Aux Mode.
- Use the controls on the top panel to begin playing audio routed through the unit or press the “AUX” button on the remote.
Using Bluetooth
- Power on the unit and press the “MODE” button on the top panel to change to Bluetooth mode or press the “BT” button on the remote control, the LED display will display “BT”.
- The previously paired device will connect to the speaker tower automatically when each time changing to Bluetooth mode.
- Press the play/pause button and hold for 10 seconds, after a beep tone, the tower speaker is prepared to be paired again.
- Search “ICES IBT-6” and pair it, and input the password “0000” if necessary.
- If it still doesn’t work, please reset the Bluetooth and follow the above step again.
Notes:
- When the Bluetooth icon on the display flashes, means the speaker is searching for the previously paired device.
- Press play/pause button and hold for 10 seconds, the Bluetooth icon on the display will flash fast, which means the speaker is ready for being paired.
- After paired successfully, the Bluetooth icon on the display will be on. The USB port for charging does not support any media feature.
USB power output DC5V 1A.
USB port for playing MP3
- Power on the unit and insert a USB Flash Drive (not supplied) into the USB port, ensuring the plug is fully inserted at the correct way.
- The tower will play music from the USB automatically or press the “MP3” button on the remote. The maximum size of Flash Drive that can be connected is 32GB max.
SD card slot for playing MP3
- Insert an SD or MMC memory card (not supplied) into the memory card expansion slot. Make sure it is inserted at the correct way.
- The tower will play music from the SD card automatically or press the “MP3” button at the remote
Playing the FM radio
- When the Tower is powered on, press “STANDBY”, then enter into the FM mode automatically.
- Ensure the FM Antenna has been fully extended and press “Mode” to adjust to “FM” mode or press the “FM” button on the remote.
- Press the “Skip forward” and “Skip backward” to select the desired FM radio station.
Press “Skip forward” or “Skip backward” and hold, the unit will scan the radio station, and stop at the next one found.
Programming & Playing of FM radio presets
- Follow the steps for Playing the FM Radio.
- Press the “Scan” button on the remote to search and preset stations in memory, (i.e. “P01” – this will blink on the display – and then the preset station frequency number will show on the display).
- Note: 20 FM stations can be set as preset.
- To play the preset Radio stations, press the “CH-” or “CH+” buttons to cycle through the preset FM radio stations.
Care of the appliance
Disconnect the appliance from the power source when cleaning.
If the unit becomes dusty, wipe it with a soft and dry duster. Use a soft
cloth to clean this appliance. Do not use any wax, polish sprays, or abrasive
cleaners on the unit.
Caution
Never allow any water or other liquids to get inside the unit while cleaning.
Dispose of used batteries in an environmental-responsible manner. This product
is not intended for commercial use. Household use only.
The normal function of the product may be disturbed by strong Electro-Magnetic
Interference. If so, simply reset the product to resume normal operation by
following the instruction manual. In case the function could not resume,
please use the product in another location.
Trouble Shooting
Before taking the unit to be repaired, please check the following table when a
problem occurs. Consult your dealer or service center if the problem cannot be
solved with the following information.
Problem | Remedy |
---|
Power
The system does not turn on or does not respond to the remote control.| – Make
sure AC/DC power plug is connected to the wall socket outlet properly and it
has power.
– If this does not help, leave the unit unplugged before seeking advice.
Remote control
No functions or short range.| – Insert new batteries.
– Aim the remote directly toward the remote sensor located in the center of
the speaker
Pairing the product Cannot pair successfully| – Check whether the speaker is
in Off or searching
mode.
– Check whether there are other Bluetooth receivers
around your Bluetooth device. Turn them off to avoid any disturbance. Attempt
to pair again.
– You can click “Forget this device” and then re-pair it
again if required. Search for “ICES IBT-6” on the Bluetooth device and pair it
again.
Cannot play properly, the music plays intermittently| Check whether the
distance between the speaker and your Bluetooth device is out of its working
distance (10m), or whether there are some obstacles blocking the communication
between the speaker and the Bluetooth device. Move the speaker or the
Bluetooth device to get the best reception.
The sound is distorted| Check the volume setting on both the speaker and your
Bluetooth device and adjust the volume to a suitable level.
SPECIFICATIONS
Power | AC— 100-240V,50/60Hz, 40W |
---|---|
Operation temperature | 0°C to + 40°C |
Speakers | 4 x 3″ speakers + 1 x 4.5″ speaker |
Speaker output | 2 x lOW |
Subwoofer Speaker | 1 x 25W |
Aux-in 1/Aux Lead | 3.5mm dia./3.5mm to 3.5mm Aux Lead |
Remote Control | Battery 3V CR2025 |
Unpacked Weight | 5.6 Kgs |
Dimensions (Approx.) | Approx. 150x150x990mm |
Frequency | 2402-2480MHz |
Transmission power | -3.325dBm |
NOTE:
As a result of continual improvements, the design and specifications of the
product differ slightly from the unit illustrated on the packaging.
Important note: If this unit will be opened, or accessed in any way by a non-
official service center, the warranty expires immediately.
This product operates at 2400 – 2483.5 MHz and is designated only to be used
inside a normal household environment. This product is suited for this purpose
within all EU
counties.
Guarantee
ICES offers service and warranty in accordance with European law, which means
that in case of repairs (both during and after the warranty period) you should
contact your local dealer.
Important note: It is not possible to send products that need repairs to ICES
directly.
Important note: If this unit is opened or accessed by a non-official service
center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use,
all warranty obligations of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore
some of the instructions, specifications, and pictures in this documentation
may differ slightly from your particular situation. All items described in
this guide are for illustration purposes only and may not apply to a
particular situation. No legal rights or entitlements may be obtained from the
description made in this manual.
Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery
should not be disposed of as general household waste in Europe. To ensure the
correct waste treatment of the product and battery, please dispose of them in
accordance to any applicable local laws or requirements for disposal of
electrical equipment or batteries. In so doing, you will help to conserve
natural resources and improve standards of environmental protection in the
treatment and disposal of electrical waste (Waste Electrical and Electronic
Equipment Directive).
Service
For more information and helpdesk support, please visit www.ices-
electronics.com
Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>