iCES IBT-6 Bluetooth Speaker Tower with FM Radio and USB User Manual

Model: IBT-6

User manual Speakertower with Bluetooth, FM radio, and USB

READ THIS INSTRUCTION MANUAL BEFORE OPERATING THE APPLIANCE. AND SAVE IT FOR FUTURE REFERENCE.
Thank you for purchasing Tower Speaker
Getting started

•  Remove the equipment from the box.
• Remove packaging and place it inside the box to store for future reference and/or for us

In the box

• Tower speaker unit
• Tower stand and screws to attach the unit
• 3.5mm Aux cable
• Instruction manual
• Remote control

Features

• 4 Stereo Speakers
• Bluetooth® Connectivity
• Aux Jack Included
• Aux Cable Included
• USB Port for charging
• USB Port for playing MP3
• SD card slot for playing MP3
• FM radio
• LED display

Safety instructions

When using electrical equipment basic safety precautions should always be followed

• This equipment is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience or knowledge. They should be given appropriate supervision and instructions to use the equipment by a person responsible for their safety.
•  Ensure the equipment is not too close to heat emitting  appliances or placed in direct sunlight
• Check that the voltage indicated on the data plate corresponds with that of the local network before connecting the equipment to the main power supply.
• Do not leave the equipment unattended while connected to the power supply
• Do not immerse the equipment in water or any other liquids.
• It is imperative to unplug the power cord after the equipment has been used before it is cleaned and while being repaired.
• Close supervision is required when using this equipment near children.
• Never leave the equipment within reach of children.
• Repairs to electrical appliances should only be performed by qualified personnel. Improper repairs may place the user and/or equipment at serious risk.
• This equipment is intended for household use only and should not be used for industrial or commercial purposes.
• Do not operate this appliance with a damaged plug or cord, after a malfunction or after being dropped or damaged in any way.
• Do not use this equipment for anything other than its intended use.
• This equipment must be placed on a stable, heat-resistant surface.
• Do not push objects into any openings as damage to the equipment and/or electric shock may occur.
• Do not use this product in wet or bad weather conditions.
• This product is not a toy.
• Do not play music at excessive levels, especially near children.

Description of parts
Top panel

1. STANDBY
2. Mode
3.  Mute
4. Volume control
5. LED display
6. Play/pause
7. Skip forward
8. Skip backward

Front

1. Speaker
2. Remote Sensor
   (Point remote to the Remote Sensor)

Back panel

1. USB port for charging(5V 1A)
2. 3.5mm Aux-in Jack
3. SD card slot for playing MP3
4. USB port for playing MP3
5. FM antenna
6. AC Cable

Remote Control

Point remote at the middle of speaker
1. STANDBY
2. USB/SD mode button
3. Mute button
4. Aux in button
5. FM radio button
6. Bluetooth button
7. Skip the backward button
8. Play/Pause button
9. Skip forward| 10. Scan button
11. CH12.
CH+
13. Bass+ effect button
14. Bass-effect button
15. Treb+ effect button
16. Treb- effect button
17. Volume+ button
18. Volume- button
---|---

Setting up the speaker tower -Attaching the base

1. Take the tower body and base carefully out of the packaging.
2. Take the screws and washers out.
3. Attach the base to the body aligning the holes on the base with the holes on the tower.
4. Screw the base onto the main unit.
5. Place the tower upright on the floor and it is now ready to use

Power setup
Connect the AC/DC adapter to the DC in the socket on the speaker back panel and plug the adaptor into the main socket.
Using the remote control
The battery
To get your remote control working initially, pull the clear tab from the battery compartment located at the bottom of the remote.

If your remote becomes intermittent or you find you have to move closer to the unit to operate, then probably the batteries need to be replaced.
To replace the batteries, slide the holder out from the base of the remote. Remove the battery and replace it with a 3-volt Lithium CR2025.

WARNING!
Do not ingest the battery, Chemical Burn Hazard
(The remote control supplied with) This product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from the children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
The batteries shall not be exposed to excessive heat such as sunshine, fire, or the lake.
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. The MAINS  plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Aux-In line in type
Requires a 3.5mm cable (included)

1. Connect a 3.5mm cable to the Aux-in jack at the rear. Connect the other end of the 3.5mm cable to an MP3 player or another audio source.
2. Press the “STANDBY” button to turn the unit on, press the “MODE” button on the top panel, or press AUX on the remote control, to choose the Aux Mode.
3. Use the controls on the top panel to begin playing audio routed through the unit or press the “AUX” button on the remote.

Using Bluetooth

1. Power on the unit and press the “MODE” button on the top panel to change to Bluetooth mode or press the “BT” button on the remote control, the LED display will display “BT”.
2. The previously paired device will connect to the speaker tower automatically when each time changing to Bluetooth mode.
3. Press the play/pause button and hold for 10 seconds, after a beep tone, the tower the speaker is prepared to be paired again.
4. Search “ICES IBT-6” and pair it, and input the password “0000” if necessary.
5. If it still doesn’t work, please reset the Bluetooth and follow the above step again.

Notes:

1. When the Bluetooth icon on the display flashes, means the speaker is searching for the previously paired device.
2. Press the play/pause button and hold for 10 seconds, the Bluetooth icon on the display will flash fast, which means the speaker is ready for being paired.
3. After paired successfully, the Bluetooth icon on the display will be on.

USB port for charging
The USB port for charging does not support any media feature.
USB power output DC5V 1A.

USB port for playing MP3

1. Power on the unit and insert a USB Flash Drive (not supplied) into the USB port, ensuring the plug is fully inserted in the correct way.
2. The tower will play music from the USB automatically or press the “MP3” button on the remote. The maximum size of Flash Drive that can be connected is 32GB max.

SD card slot for playing MP3
1. Insert an SD or MMC memory card (not supplied) into the memory card expansion slot. Make sure it is inserted in the correct way.
2. The tower will play music from the SD card automatically or press the “MP3” button on the remote
Playing the FM radio

1. When the Tower is powered on, press “STANDBY”, then enter into the FM mode automatically.
2. Ensure the FM Antenna has been fully extended and press “Mode” to adjust to “FM” mode or press the “FM” button on the remote.
3. Press the “Skip forward” and “Skip backward” to select the desired FM radio station.
   Press “Skip forward” or “Skip backward” and hold, the unit will scan the radio station, stop at the next one, and find one.

Programming & Playing of FM radio presets

1. Follow the steps for Playing FM Radio.
2. Press the “Scan” button on the remote to search and preset stations in memory, (i.e. “P01” – this will blink on the display – and then the preset station frequency number will show on the display).
3. Note: 20 FM stations can be set as preset.
4. To play the preset Radio stations, press the “CH-” or “CH+” buttons to cycle through the preset FM radio stations

Care of the appliance
Disconnect the appliance from the power source when cleaning.
If the unit becomes dusty, wipe it with a soft and dry duster. Use a soft cloth to clean this appliance. Do not use any wax, polish sprays, or abrasive cleaners on the unit.
Caution
Never allow any water or other liquids to get inside the unit while cleaning. Dispose of used batteries in an environmental-responsible manner. This product is not intended for commercial use. Household use only.
The normal function of the product may be disturbed by strong Electro-Magnetic
Interference. If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in another location.

Trouble Shooting
Before taking the unit to be repaired, please check the following table when a problem occurs. Consult your dealer or service center if the problem cannot be solved with the following information.

Power
The system does not turn on or does not respond to the remote control.| – Make sure AC/DC power plug is connected to the wall socket outlet properly and it has power.
– If this does not help, leave the unit unplugged before seeking advice.
Remote control No functions or short range.| – Insert new batteries.
– Aim the remote directly toward the remote sensor located in the center of the speaker
Pairing the product Cannot pair successfully| – Check whether the speaker is in Off or searching mode.
– Check whether there are other Bluetooth receivers around your Bluetooth device. Turn them off to avoid any disturbance. Attempt to pair again.
– You can click “Forget this device” and then re-pair it again if required. Search for “ICES IBT-6” on the Bluetooth device and pair it again.
Cannot play properly, the music plays intermittently| Check whether the distance between the speaker and your Bluetooth device is out of its working distance (10m), or whether there are some obstacles blocking the communication between the speaker and the Bluetooth device. Move the speaker or the Bluetooth device to get the best reception.
The sound is distorted| Check the volume setting on both the speaker and your Bluetooth device and adjust the volume to a suitable level.

SPECIFICATIONS

NOTE:
As a result of continual improvements, the design and specifications of the product differ slightly from the unit illustrated on the packaging.
Important note: If this unit will be opened, or accessed in any way by a non- official service center, the warranty expires immediately.
This product operates at 2400 – 2483.5 MHz and is designated only to be used inside a normal household environment. This product is suited for this purpose within all EU counties.
Guarantee
ICES offers service and warranty in accordance with European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important note : It is not possible to send products that need repairs to ICES directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications, and pictures in this documentation may differ slightly from your particular situation. All items described in this guide are for illustration purposes only and may not apply to a particular situation. No legal rights or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance with any applicable local laws or requirements for the disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in the treatment and  disposal of electrical waste (Waste Electrical and Electronic Equipment Directive)

Service
For more information and helpdesk support, please visit www.ices- electronics.com
Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>