oraclelighting 3140-Z-001 UNIVERSAL LED ILLUMINATED LETTERS User Manual
- June 4, 2024
- oraclelighting
Table of Contents
oraclelighting 3140-Z-001 UNIVERSAL LED ILLUMINATED LETTERS
INSTALLATION: FIRST REMOVE THE GRILL
Step #1) Remove Grill Cover Air Shield (Push Pins)
Step #2) Remove (4) 10mm bolts on the top of grill.
Step #3) Pull Grill to Release Remaining Clips.
REMOVING THE FACTORY LETTERS
With the grill now removed you can drill out the plastic rivets holding in the
factory letters. Using a 1/4″ drill bit drill out the (2) melted plastic
rivets onthe BACK side of each letter. The original letters will simply drop
out once the plastic is removed.
INSTALLING THE LED LETTERS
Optional: Use Tape Primer ORACLE Part #2082-504 to treat the surface. Drill
holes for cables to pass through. Attach the individual letters and group all
the red and black wires together.
WIRING GUIDE
Ground the black cables to the fender ground post or battery post. Connect red
wires to desired power source. For example: Parking Lights, Aux Switch, or
ignition switched fuse in the fuse box by using an “add-a-circuit”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>