HAM DinMeter3P DIN Rail WiFi Switch and Energy Metering User Guide
- June 3, 2024
- HAM
Table of Contents
HAM DinMeter3P DIN Rail WiFi Switch and Energy Metering
- L3
- L2
- L1
- N
- CT3-
- CT3+
- CT2-
- CT2+
- CT1-
- CT1+
- Phase 1 Current Transformer clamp
- Phase 2 Current Transformer clamp
- Phase 3 Current Transformer clamp
- Reboot button
- Setup Button
- Wi-Fi Connection Status LED
- Cloud Connection Status LED
- Energy Measurement with Current Transformers
- Measure Active Powers, Voltages, Currents, Power Factors, Reactive Powers, Total Harmonic Distortions
- Internet connection via Wi-Fi
- Easy setup
- Input 3x230VAC (3P4W), 0.02A
TROUBLESHOOTING
The Status LED is not lit and the device is shown as disconnected on the app This means that the device is not connected to the Cloud
- Check your Internet connection. If you cannot access the Internet with a different device on the same Wi-Fi network check with your ISP
- Check that the server is accessible at https://hamsystems.eu with your browser. If it is not, check again in 5 minutes or refresh the app / webpage
- Try restarting the device with the Reset Button and / or with removing and re-attaching the power. Wait for a few minutes
- Check if the device is connected to your Wi-Fi router / Access Point. If the device does not appear to be connected, then repeat the setup procedure and make sure that the Wi-Fi name and password are correct. The device may also need to be whitelisted depending on your network configuration. Note that the device and the app use the ports 9001 and 9002
SETUP
In order to connect the device to your Wi-Fi network, you need to use the HAM Systems app. All the other features are also available on the Web on https://hamsystems.eu
- Connect the device according to the wiring diagram on the first page. Put the Current Transformer around the wire you want to measure.
- Check your connections and power up the device
- Open the HAM Systems app. If you don’t have an account create one
- Click on (+) button on the devices list view on the APP
- Follow the instructions on the app
- If the Status LED is fully on and the device does not appear on the app, then you may also need claim the device to your account. Click on (+) and select the Claim Device option
- You should now be able to view data from the device on the app
In case you are having difficulties, you can try restarting the device and
repeating the steps. If you want to change the Wi-Fi network of your device,
you can do so by doing the steps 3-5 . You don’t have to re-claim your device
in this case
SAFETY WARNINGS
- Incorrect wiring of the device may lead to permanent damage to the device and / or sensors. Make sure your connections are correct before powering the device
- Do not disassemble the device. Doing so, voids the warranty
- In case of loss of network, you will not be able to monitor the real-time values of the device
- You should not rely on the device in such a way that puts human or animal lives at risk. You are responsible for checking the accuracy of the readings periodically
USAGE
To use the device, visit our web app at https://hamsystems.eu or search HAM Systems at the App Store / Play Store Some features of the app:
- Control outputs from anywhere in the world via the Internet
- Set up time based schedules and timers
- View real time and historical output state
- Create interactions between other HAM Systems devices by using IF this THEN that style rules Secured communications with TLS
- Organize your devices with groups and floorplans
The Setup button is using during the setup process to pair the device to your Wi-Fi network The Reset button restarts the device, similar to power cycling
TECHNICAL SPECIFICATIONS
- Environmental conditions :-10°C to 55°C
- Input : 3x230VAC (3P4W), 10mA 50Hz
- Current Transformer Input: 300mV/150mA max per input
- Accuracy : Active Power/Energy 1%Reactive Power 2%
- Dimensions : 2 DIN Rail Modules
- Enclosure Material :ABS
- Communications :Wi-Fi IEEE 802.11 b/g/n 2.4Ghz
- protocol :Bluetooth Low Energy