Whitecroft lightning RAL 9003 Esprit Retro Fit Lightning Instruction Manual
- June 4, 2024
- Whitecroft lightning
Table of Contents
Whitecroft lightning RAL 9003 Esprit Retro Fit Lightning
SPECIFICATION
- Finish: RAL 9003
- Materials: Mild Steel
- Weight: 0.3Kg. + Fitting
- Ingress protection: IP20
INSTALATION INSTRUCTION
- Step 1 – Ensure that the hole trying to cover is within the the Minimum and Maxiumum Range
- Step 2 – Fold 4 tabs as shown to centre the bezel in the hole there are a number of different easy folds for different diameters select bend closest to your hole size
- Step 3 – Fold back the springs on the retro fit bezel and place them through the ceilig void and release so that the bezel is held up against the ceiling
- Step 4 – Wire up the driver from the product through the aperture, then install the fitting by bending up the springs and instering them into the void at 90 degrees from the retro fit bezel springs and releaseing the product so that it pulls up to the ceiling.
TECHNICAL SUPPORT
- Telephone: 0161 331 5700
- Email: technical@whitecroftlight.com
- http://whitecroftlighting.com/
ABOUT COMPANY
- Whitecroft Lighting Limited
- Burlington Street, Ashton-under-Lyne, Lancashire OL7 0AX
- Telephone: +44 (0)161 330 6811
- Facsimile: +44 (0)161 331 5855
- Registered No. 3848973 England
- Registered Office: As above
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>