Whitecroft lightning Esprit LED Compact Downlighter Instruction Manual
- June 4, 2024
- Whitecroft lightning
Table of Contents
Whitecroft lightning Esprit LED Compact Downlighter.
GENERAL INFORMATION
-
A qualified electrician, in accordance with IEE wiring regulations should carry out
connection to mains wiring. -
Observe ESD precautions during installation.
-
This unit must be EARTHED.
-
Ensure that the rated voltage and frequency requirements are compatible with the available mains supply.
-
Cleaning of reflectors and lenses should be carried out using clean, soft and lint free cloths and anti-static cleaning fluid
-
Do not carry out high voltage insulation test, i.e. 500/1000v this may damage internal components.
-
Do not cover luminaire housing with thermally insulating material.
-
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or similar qualified person.
-
Batteries used in emergency versions of this luminaire range are replaceable by a qualified electrician.
SPECIFICATION
- Lamp type : LED
- Output: 1100lm /2000lm nominal.
- Colour : 3000°K/4000°K – Ra80 (830/840)
- Body : White Polycarbonate
- Reflector : Textured specular Anodised Aluminium
- Diffuser : Polycarbonate
- Control gear : Fixed output / Dali
- Emergency: Integral 3hr / COMEPS
- Supply : 240v 50Hz AC
- Ambient Temperature : 0-25°C
- Supply flex : 0.5 – 2.5mm². 10-11mm stripped.
- Terminal block type : Push-wire (non-EM) / piano-key (EM)
- Ingress protection : IP44 (from below)
INSTALLATION
| Follow this side for: | 3000°K | 4000°K |
|---|---|---|
| 1100lm | 2000lm | 1100lm |
| Fixed output | • | • |
| DALI | • | • |
| Fixed output 3hr EM | ||
| DALI 3hr EM | ||
| Fixed output COMEPS | ||
| DALI COMEPS |
