8719992301621 PlayCool Tri-Prodection Charging Station User Manual
- June 4, 2024
- PlayCool
Table of Contents
- 8719992301621 PlayCool Tri-Prodection Charging Station
- Operating Instructions and Specifications
- Compatible with
- Functions
- Specification
- Indicator light
- Operation
- Full charging detection
- Over current protection
- Assembly and use of diagram
- Included
- Service and warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
8719992301621 PlayCool Tri-Prodection Charging Station
Operating Instructions and Specifications
- 1 CH1 controller charging and full charged indicator light
- 2 CH2 controller charging and full charged indicator light
- 3 CH1 controller connect charging port
- 4 CH2 controller connect charging port
- 5 6 Decorative light
- 7 Power input
- 8 Touch control switch of decorative light
Compatible with
PS5 Controller
Functions
Compatible with a variety of power adapter on the market, environmentally friendly and convenient
-
The product has a smart recognition of the controller charging current; not afraid of the situation that can’ charge when ps5 controller was upgraded
-
Product built-in design of software and hardware multiple protection; current limit, voltage limit, over current protection, low voltage protection, high voltage protection, short circuit protection
-
The product use the slot contact charging method, simple and convenient to operate, and solves the problem of controller difficult alignment
-
Build in full charging indication function, to ensure controllers have enough power, so that gamer can play games without worrying about battery life
-
Supports simultaneous charging of up to 2 controllers
Specification
Indicator light
Operation
- When the controller charging, the red LED light of of CH1 is on, indicating that it is charging;
- If the controller is full charged, the red LED light of CH1 turn to blue;
The light status of CH2 is same as CH1
Full charging detection
When the charging current of the controller is less than 140mA for 2 seconds, it is considered that the controller is fully charged and the charging indicator light turn to blue
Over current protection
For each charging port, the normal charging current is about 750mA, and the maximum allowable current is 1500mA. If it exceeds 1500mA, the charging port will be over-current protected and charging is not allowed, and the corresponding charging indicator will flash quickly. Resume charging function after power off.
Input voltage detection
- When the power input voltage exceeds 5.7V, it is considered to be over-voltage, the charging stand will close all charging ports, and all charging indicators will flash; the charging function needs to be restored after power off
- When the power input voltage is less than 4.2V, it is considered to be under-voltage, the charging stand will close all charging ports, and all charging indicators will flash; the charging function needs to be restored after power off
Intelligent control of charging current
-
【If the stand is powered first then insert 2 controllers】 The first inserted controller will be charged first; the second inserted controller will detect the charging current of the first controller, if its current exceeds 850ma, then the second inserted controller enter standby charging mode; if its current is less than 850ma, then the second inserted controller will be charged, at this time, the stand will detect total charging current, if the total charging current is over 1700ma, the second inserted controller enter standby charging mod
(corresponding indicator light flash slowly),the second inserted controller start charge until first controller is full charged or take out the first controller -
【If the two controllers are inserted on the stand, then power on the stand】
CH1 will be charged first, and then CH2 will be charged
(Note: CH1 is charging, and the red LED of CH2 is flashing slowly waiting for a charge)
Restore the charging function
When the controller is fully charged, if it detects that the current is over 300mA, it will return to the charging state
Assembly and use of diagram
Notes
- Please do not store products in humid or high-temperature places.
- Do not knock, beat, puncture, or try to disassemble. Avoid unnecessary damage to the product.
- The product will not be covered by an after-sales warranty if the product has been disassembled by non-professionals.
- If some games can not be played because of official game platform software upgrades or source code changes we are not responsible.
Included
- PlayCool Charging Station for DualSense 1x
- User Manual 1x
- Type-C cable1x
Service and warranty
If you need service or information regarding your product, please contact us
at contact@elite-store.nl
PlayCool provides a 1-year warranty on its products. The products needs to be
returned with proof of purchase and the defects need to be reported within one
year from the date of purchase. This warranty does not cover:
- Damages caused by misuse or incorrect repair;
- Damages by wearable goods;
- Defects that the customer was aware of at the time of purchase;
- Damages or defects caused by customer neglect;
- Damages or defects caused by third parties.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>