Qivation TiO2 Wireless Charging Pad Instructions
- June 4, 2024
- Qivation
Table of Contents
Qivation TiO2 Wireless Charging Pad
Thank you very much for choosing our products.
please read the product description carefully before using the product.
Features of the product
- Simple and exquiste shape
- Mobile phone stand function
- Adjustable holder
- Charging distance < 8mm
Appearance button
- Metal electrolytic board
- Silicone mat
- Heat-drawn brushed aluminum
- PP lampshade
- Tact switch
- Type-C interface
- Shading ABS
Operation method
- Connect the USB port of the USB cable to the power adapter and the Type-C port to the wireless charger.
- After the product is powered on, the product indicator lights flash blue and white, and the white light is always on.
- Place the device to be charged in the charging indication area of the product. The white light turns blue, the blue light is always on, and the charging state is entered.
Light touch function
- Continuous touch twice to start the first 30% brightness of the light
- Touch the second Ilight with a brightness of 70%
- Touch the third light brightness to 100%%
- Tough the key twice to turn off the light when it is on.
Applicable equipment
Intelligent identification of charging devices, compatible with major brands, meet the QI standard of mobile devices:
- Samsung: Galaxy S6 /Galaxy S7 /Galaxy S8/Note8/Note9
- Apple: iPhone 8/iPhone X iPhone XR iPhone XS iPhone XS Max
- Huawei: P30 Pro/Mate20 Pro / Mate 20 RS
- Xiao MI: MI9/ MIX 2S / MIX 3
(The above are some mainstream devices)
Precautions
- Do not use or store the product for long periods of time in direct Sunlight or high temperatures.
- Do not charge too close to magnetic cards, magnetic recording media and precision instruments.
- Do not disassemble or modify this product.
- Do not touch the AC adapter with wet hands.
- Keep this product away from water or other liquids.
- If you want to clean the product, please disconnect the power.
- Product working environment temperature range:-20-45 ° C.
Product parameters
- Product material: imported ABS+PP+ hardware
- Power input: DC5V/2.1A 9V/1.67A
- Power output: DC5V/1A 9V/1.2A
- Charging efficiency: 75%
- Power: 10W
- Product size: 191 X 203 X 13mm
- Product weight: 380g
Power supply port is the international common Type C port
Please refer to our Product, Warranty and Disclaimer Policy at our website
www.qivation.com
FCC
FCC ID: 2A3PK-WQ10002
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to thiS unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. f this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or replace the receiving antenna
- Increase the separation between the equipment and receive.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.